Registration Dossier
Registration Dossier
Please be aware that this old REACH registration data factsheet is no longer maintained; it remains frozen as of 19th May 2023.
The new ECHA CHEM database has been released by ECHA, and it now contains all REACH registration data. There are more details on the transition of ECHA's published data to ECHA CHEM here.
Use of this information is subject to copyright laws and may require the permission of the owner of the information, as described in the ECHA Legal Notice.
EC number: 434-050-3 | CAS number: -
Guidance on Safe Use
Guidance on Safe Use
Administrative data
First-aid measures
- General advice:
First aider needs to protect himself. Move out of dangerous area. Take off all contaminated clothing immediately.
- Following inhalation: If breathed in, move person into fresh air. If symptoms persist, call a physician.
- Following skin contact: After contact with skin, wash immediately with plenty of soap and water. If symptoms persist, call a physician.
- Following eye contact: Rinse thoroughly with plenty of water, also under the eyelids. Protect unharmed eye. If eye irritation persists, consult a specialist.
- Following ingestion: When swallowed, allow water to be drunk. Do NOT induce vomiting. Call a physician immediately.
- Most important symptoms and effects, both acute and delayed: no data available
- Indication of any immediate medical attention and special treatment needed: no data available
- Following inhalation: If breathed in, move person into fresh air. If symptoms persist, call a physician.
- Following skin contact: After contact with skin, wash immediately with plenty of soap and water. If symptoms persist, call a physician.
- Following eye contact: Rinse thoroughly with plenty of water, also under the eyelids. Protect unharmed eye. If eye irritation persists, consult a specialist.
- Following ingestion: When swallowed, allow water to be drunk. Do NOT induce vomiting. Call a physician immediately.
- Most important symptoms and effects, both acute and delayed: no data available
- Indication of any immediate medical attention and special treatment needed: no data available
Fire-fighting measures
- Suitable extinguishing media:
water spray, foam, carbon dioxide (CO2), dry powder
- Unsuitable extinguishing media: high volume water jet
- Special hazards arising from the substance or mixture: In case of fire hazardous decomposition products may be produced such as: oxides of nitrogen (NOx), gaseous hydrogen chloride (HCl).
- Advice for fire fighter: In the event of fire, wear self-contained breathing apparatus.
Use extinguishing measures that are appropriate to local circumstances and the surrounding environment.
- Unsuitable extinguishing media: high volume water jet
- Special hazards arising from the substance or mixture: In case of fire hazardous decomposition products may be produced such as: oxides of nitrogen (NOx), gaseous hydrogen chloride (HCl).
- Advice for fire fighter: In the event of fire, wear self-contained breathing apparatus.
Use extinguishing measures that are appropriate to local circumstances and the surrounding environment.
Accidental release measures
- Personal precautions, protective equipment and emergency procedures:
Ensure adequate ventilation. Avoid dust formation.
- Environmental precautions: Prevent further leakage or spillage if safe to do so. Do not let product enter drains. Do not flush into surface water or sanitary sewer system. Do not allow run-off from fire fighting to enter drains or water courses.
- Methods and material for containment and cleaning up: Use mechanical handling equipment. Pick for disposal in tightly closed containers
- Environmental precautions: Prevent further leakage or spillage if safe to do so. Do not let product enter drains. Do not flush into surface water or sanitary sewer system. Do not allow run-off from fire fighting to enter drains or water courses.
- Methods and material for containment and cleaning up: Use mechanical handling equipment. Pick for disposal in tightly closed containers
Handling and storage
- Precautions for safe handling:
Advice on safe handling:
Exhaust ventilation at the object is necessary. Avoid dust formation.
Advice on protection against fire and explosion:
Normal measures for preventive fire protection.
Hygiene measures:
Handle in accordance with good industrial hygiene and safety practice. When using, do not eat, drink or smoke. Wash hands before breaks and immediately after handling the product. Avoid breathing dust. Avoid contact with skin, eyes and clothing.
- Conditions for safe storage, including any incompatibilities:
Further information on storage conditions: Store in original container, tightly closed, cool and dry.
Advice on safe handling:
Exhaust ventilation at the object is necessary. Avoid dust formation.
Advice on protection against fire and explosion:
Normal measures for preventive fire protection.
Hygiene measures:
Handle in accordance with good industrial hygiene and safety practice. When using, do not eat, drink or smoke. Wash hands before breaks and immediately after handling the product. Avoid breathing dust. Avoid contact with skin, eyes and clothing.
- Conditions for safe storage, including any incompatibilities:
Further information on storage conditions: Store in original container, tightly closed, cool and dry.
Transport information
Shippingopen allclose all
SpecialProvisionsopen allclose all
Shippingopen allclose all
Remarksopen allclose all
Marine transport (UN RTDG/IMDG)
Shippingopen allclose all
Remarksopen allclose all
Shippingopen allclose all
Remarksopen allclose all
SpecialProvisionsopen allclose all
Exposure controls / personal protection
Occupational exposure controls
The Personal Protective Equipment must be in accordance with EN standards:respirator EN 136, 140, 149; safety glasses EN 166; protective suit: EN 340, 463, 468, 943-1, 943-2; gloves EN 374, safety shoes EN-ISO 20345.
Do not breathe dust.
Wash hands before breaks and at the end of workday.
Engineering measures
Provide exhaust ventilation if dust is formed.
Personal protective equipment
Respiratory protection:
In the case of dust or aerosol formation use respirator with an approved filter.
Hand protection:
Glove material: Natural Latex
Break through time: 480 min
Glove thickness: 0,6 mm
Lapren®706
Gloves must be inspected prior to use.
Replace when worn.
Remarks:Supplementary note: The specifications are based on information and tests from similar substances by analogy. Due to varying conditions ( e.g.temperature or other strains) it must be considered that the usage of a chemical protective glove in practice may be much shorter than the permeation time determined in accordance with EN 374. Since actual conditions of practical use often deviate from standardised conditions according EN 374 the glove manufacturer reccomends to use the chemical protective glove in practice not longer than 50% of the recomended permeation time. Manufacturer´s directions for use should be observed because of great diversity of types . Suitable gloves tested according EN 374 are supplied e.g. from KCL GmbH, D-36124 Eichenzell, Vertrieb@kcl.de
Eye protection:
Safety glasses with side-shields
Skin and body protection:
Protective suit
Environmental exposure controls
Handle in accordance with local environmental regulations and good industrial practices.
The Personal Protective Equipment must be in accordance with EN standards:respirator EN 136, 140, 149; safety glasses EN 166; protective suit: EN 340, 463, 468, 943-1, 943-2; gloves EN 374, safety shoes EN-ISO 20345.
Do not breathe dust.
Wash hands before breaks and at the end of workday.
Engineering measures
Provide exhaust ventilation if dust is formed.
Personal protective equipment
Respiratory protection:
In the case of dust or aerosol formation use respirator with an approved filter.
Hand protection:
Glove material: Natural Latex
Break through time: 480 min
Glove thickness: 0,6 mm
Lapren®706
Gloves must be inspected prior to use.
Replace when worn.
Remarks:Supplementary note: The specifications are based on information and tests from similar substances by analogy. Due to varying conditions ( e.g.temperature or other strains) it must be considered that the usage of a chemical protective glove in practice may be much shorter than the permeation time determined in accordance with EN 374. Since actual conditions of practical use often deviate from standardised conditions according EN 374 the glove manufacturer reccomends to use the chemical protective glove in practice not longer than 50% of the recomended permeation time. Manufacturer´s directions for use should be observed because of great diversity of types . Suitable gloves tested according EN 374 are supplied e.g. from KCL GmbH, D-36124 Eichenzell, Vertrieb@kcl.de
Eye protection:
Safety glasses with side-shields
Skin and body protection:
Protective suit
Environmental exposure controls
Handle in accordance with local environmental regulations and good industrial practices.
Stability and reactivity
1. Reactivity
Stable under normal conditions.
2. Chemical stability
Decomposition temperatur of >317 °C
3. Possibility of hazardous reactions
Hazardous polymerisation does not occur.
4. Conditions to avoid
Avoid dust formation.
5. Incompatible materials
Alkalis
6. Hazardous decomposition products
Chlorine compounds
Nitrogen oxides (NOx)
Carbon oxides
Stable under normal conditions.
2. Chemical stability
Decomposition temperatur of >317 °C
3. Possibility of hazardous reactions
Hazardous polymerisation does not occur.
4. Conditions to avoid
Avoid dust formation.
5. Incompatible materials
Alkalis
6. Hazardous decomposition products
Chlorine compounds
Nitrogen oxides (NOx)
Carbon oxides
Disposal considerations
Waste treatment methods
Product:
Dispose according to legal requirements.
Packaging:
Legal requirements are to be considered in regard of reuse or disposal of used packaging materials
Further information:
Provisions relating to waste:
EC Directive 2006/12/EC; 2008/98/EEC
Regulation No. 1013/2006
Product:
Dispose according to legal requirements.
Packaging:
Legal requirements are to be considered in regard of reuse or disposal of used packaging materials
Further information:
Provisions relating to waste:
EC Directive 2006/12/EC; 2008/98/EEC
Regulation No. 1013/2006
Information on Registered Substances comes from registration dossiers which have been assigned a registration number. The assignment of a registration number does however not guarantee that the information in the dossier is correct or that the dossier is compliant with Regulation (EC) No 1907/2006 (the REACH Regulation). This information has not been reviewed or verified by the Agency or any other authority. The content is subject to change without prior notice.
Reproduction or further distribution of this information may be subject to copyright protection. Use of the information without obtaining the permission from the owner(s) of the respective information might violate the rights of the owner.
