Registration Dossier
Registration Dossier
Use of this information is subject to copyright laws and may require the permission of the owner of the information, as described in the ECHA Legal Notice.
EC number: 215-148-3 | CAS number: 1306-24-7
Melting point / freezing point
Administrative data
Link to relevant study record(s)
- Endpoint:
- melting point/freezing point
- Type of information:
- experimental study
- Adequacy of study:
- key study
- Study period:
- 15 November 2017 to 15 November 2017
- Reliability:
- 1 (reliable without restriction)
- Rationale for reliability incl. deficiencies:
- guideline study
- Qualifier:
- according to guideline
- Guideline:
- OECD Guideline 102 (Melting point / Melting Range)
- Deviations:
- no
- Qualifier:
- according to guideline
- Guideline:
- EU Method A.1 (Melting / Freezing Temperature)
- Deviations:
- no
- GLP compliance:
- yes (incl. QA statement)
- Type of method:
- capillary method
- Specific details on test material used for the study:
- Name: Cadmium selenide
Batch/Lot number: 270018
Appearance: Black powder
CAS number: 1306-24-7
Purity: 99.999%
Expiry (Retest) date: 24 August 2020
Storage conditions: Controlled room temperature (in a tight closed container)
Safety precautions: Enhanced safety precautions were applied considering the supplied safety datasheet to assure personnel health and safety. - Key result
- Melting / freezing pt.:
- > 400 °C
- Decomposition:
- no
- Sublimation:
- no
- Remarks on result:
- other: The test was carried out at air atmospheric pressure and room temperature
- Conclusions:
- No melting point was observed up to 400°C.
No physical change of colour or form was observed, there was no visual indication of decomposition. - Executive summary:
The objective of the study was to determine the melting point or melting range of the test item. A small amount of the test item was placed in a capillary tube and packed tightly, then heated in the electronic controlled sample block and the temperature around the sample was displayed. The sample was observed visually while raising the temperature at an appropriate rate in an appropriate range. The initial and final melting temperatures were determined.
The study was conducted in accordance with the following test guidelines in a GLP compliant laboratory:
Commission Regulation (EC) No 440/2008 of 30 May 2008 laying down test methods pursuant to Regulation (EC) No 1907/2006 of the European Parliament and of the Council on the Registration, Evaluation, Authorisation and Restriction of Chemicals (REACH), Method A.1, Official Journal of the European Union L 142 of31 May 2008
Organisation for Economic Co-operation and Development (OECD), Guidelines for Testing of Chemicals, Guideline No. 102, “Melting Point/ Melting Range”; adopted July 27, 1995
No melting point was observed up to 400°C, therefore the melting point is >400°C.No physical change of colour or form was observed, there was no visual indication of decomposition.
Reference
Preliminary test
The test item did not melt.
Main test
No melting point was observed up to 400°C.
No physical change of colour or form was observed, there was no visual indication of decomposition.
Description of key information
Key value determined in a GLP accredited laboratory study using relative self-ignition test, in accordance with OECD Guideline 102 (Melting point / Melting Range) and EU Method A.1 (Melting / Freezing Temperature).
Key value for chemical safety assessment
- Melting / freezing point at 101 325 Pa:
- 400 °C
Additional information
The objective of the study was to determine the melting point or melting range of the test item. A small amount of the test item was placed in a capillary tube and packed tightly, then heated in the electronic controlled sample block and the temperature around the sample was displayed. The sample was observed visually while raising the temperature at an appropriate rate in an appropriate range. The initial and final melting temperatures were determined.
The study was conducted in accordance with the following test guidelines in a GLP compliant laboratory:
Commission Regulation (EC) No 440/2008 of 30 May 2008 laying down test methods pursuant to Regulation (EC) No 1907/2006 of the European Parliament and of the Council on the Registration, Evaluation, Authorisation and Restriction of Chemicals (REACH), Method A.1, Official Journal of the European Union L 142 of31 May 2008
Organisation for Economic Co-operation and Development (OECD), Guidelines for Testing of Chemicals, Guideline No. 102, “Melting Point/ Melting Range”; adopted July 27, 1995
No melting point was observed up to 400°C, therefore the melting point is >400°C.No physical change of colour or form was observed, there was no visual indication of decomposition.
Information on Registered Substances comes from registration dossiers which have been assigned a registration number. The assignment of a registration number does however not guarantee that the information in the dossier is correct or that the dossier is compliant with Regulation (EC) No 1907/2006 (the REACH Regulation). This information has not been reviewed or verified by the Agency or any other authority. The content is subject to change without prior notice.
Reproduction or further distribution of this information may be subject to copyright protection. Use of the information without obtaining the permission from the owner(s) of the respective information might violate the rights of the owner.
