EU-IN_VITRO_MEDICAL_DEVICES-ART_3_ANX_1

In Vitro Diagnostic Medical Devices Directive - Hazardous Substances

EU. Hazardous Substances for Purposes of Article 3 & Annex I (Essential Requirements), Directive 98/79/EC on In Vitro Diagnostic Medical Devices, 7 December 1998

This list contains a non-exhaustive inventory of hazardous substances for purposes of essential requirements (Article 3 and Annex I) for general safety, design, manufacture and hazard communication of in vitro diagnostic medical devices. It is derived from: Table 3 of Annex VI to CLP, REACH Candidate List of SVHCs, and Directive 2000/54/EC's Annex III (Biological Agents list). Note that Regulation 2017/746/EU on in vitro diagnostic medical devices was published in the EU Official Journal on 5 May 2017. With few exceptions specified in Articles 112 and 113 of this Regulation, Directive 98/79/EC is repealed, and the rules pursuant to 2017/746/EU apply, from 26 May 2022.

Last updated 23 April 2024. Database contains 4821 unique substances/entries.
Filter the list

DUASYN DIREKTSCHWARZ HEF-SF VP 332
411-890-9
108936-08-9
Acute Tox. 4; Eye Dam. 1
C.I. DIRECT BLACK 184; C.I. DIRECT NOIR 184
406-000-0
173939-66-7
Eye Dam. 1
BROWN 1619246
406-870-1
115100-55-5
Skin Sens. 1
428-260-4
-
Eye Dam. 1
REACTIVE RED 180 (HYDROLYSED)
423-200-3
98114-32-0
Eye Dam. 1; Skin Sens. 1
428-400-4
-
Eye Dam. 1
444-050-5
-
Eye Dam. 1
RED MDO 358
414-620-8
-
Eye Dam. 1; Skin Sens. 1
NOIR SANDODERM HH 1050; SANDODERM BLACK HH 1050; SANDODERM BLACK R; SANDODERM BLACK R CONC.; SANDODERM SCHWARZ R; SANDODERM SCHWARZ R KONZ.
402-850-1
-
Eye Dam. 1
P2-800; P2-935LV
415-870-0
-
Skin Sens. 1
GA161895; GLUCAMIDE
411-130-6
-
Eye Dam. 1
435-180-3
-
Asp. Tox. 1; Skin Irrit. 2
ORANGE LEP 2471
421-290-9
-
STOT RE 2
-
-
yes
ADDITIV 104
412-780-3
1380226-46-9
Skin Irrit. 2; Skin Sens. 1
432-200-2
1379679-02-3
STOT SE 3; Skin Irrit. 2; Eye Dam. 1
439-540-0
-
Skin Irrit. 2; Skin Sens. 1
431-120-5
-
Acute Tox. 3; Acute Tox. 4; Eye Irrit. 2; Skin Sens. 1
SHC 3000
401-530-9
-
Flam. Sol. 1; STOT SE 1; Acute Tox. 4
TYZOR ZEC
417-110-3
1379678-99-5
Flam. Liq. 2; Skin Irrit. 2; Eye Dam. 1
YELLOW MGI 1301
424-250-9
-
Eye Dam. 1
E-101
420-310-3
-
Acute Tox. 4
R633
406-230-1
224635-63-6
Flam. Liq. 3; Carc. 2; Skin Corr. 1B; Acute Tox. 4; Skin Sens. 1
PES-SOLID
420-070-1
-
Org. Perox. D; Acute Tox. 4; Skin Corr. 1A
424-510-1
-
Eye Dam. 1
PRODUKT 1245
420-980-7
-
Eye Dam. 1
PDN 2287
417-450-2
-
Eye Irrit. 2; Skin Irrit. 2; Skin Sens. 1
428-630-5
-
Skin Sens. 1
500-033-5
25068-38-6
Eye Irrit. 2; Skin Irrit. 2; Skin Sens. 1
939-460-0
1471311-26-8
yes
426-860-0
191877-09-5
Eye Dam. 1
432-440-8
220444-73-5
Carc. 2; Acute Tox. 4; Skin Corr. 1B; Skin Sens. 1
-
-
Carc. 1B; Muta. 2; Acute Tox. 4; Acute Tox. 3; STOT RE 2; Skin Corr. 1B; Eye Dam. 1; Skin Sens. 1A
-
-
Carc. 1B; Muta. 2; Acute Tox. 4; STOT RE 2; Skin Corr. 1C; Eye Dam. 1; Skin Sens. 1A
ORGANOTUNGSTEN COMPOUND CONCENTRATE
408-250-6
121754-49-2
Flam. Liq. 2; Acute Tox. 4; Skin Corr. 1B; Skin Sens. 1
MP-2000; MP-2000X
406-620-1
129217-90-9
Skin Sens. 1
FCC 963
410-880-1
147170-38-5
Acute Tox. 4; Skin Corr. 1B
231-768-7
7723-14-0
Flam. Sol. 1
show/hide
Glass, oxide, chemicals
This category encompasses the various chemical substances manufactured in the production of inorganic glasses. For purposes of this category, 'glass' is defined as an amorfous, inorganic, transparent, translucent or opaque material traditionally formed by fusion of sources of silica with a flux, such as an alkali-metal carbonate, boron oxide, etc. and a stabilizer, into a mass which is cooled to a rigid condition without crystallization in the case of transparent or liquid-phase separated glass or with controlled crystallization in the case of glass-ceramics. The category consists of the various chemical substances, other than by-products or impurities, which are formed during the production of various glasses and concurrently incorporated into a glass mixture. All glasses contain one or more of these substances, but few, if any, contain all of them. The elements listed below are principally present as components of oxide systems but some may also be present as halides or chalcogenides, in multiple oxidation states, or in more complex compounds. Trace amounts of other oxides or chemical compounds may be present. Oxides of the first seven elements listed* comprise more than 95 percent, by weight, of the glass produced. @Aluminium*@Lead@Boron*@Lithium@Calcium*@Manganese@Magnesium*@Molybdenum@Potassium*@Neodymium@Silicon*@Nickel@Sodium*@Niobium@Antimony@Nitrogen@Arsenic@Phosphorus@Barium@Praseodymium@Bismuth@Rubidium@Cadmium@Selenium@Carbon@Silver@Cerium@Strontium@Cesium@Sulfur@Chromium@Tellurium@Cobalt@Tin@Copper@Titanium@Germanium@Tungsten@Gold@Uranium@Holmium@Vanadium@Iron@Zinc@Lanthanum@Zirconium
EC / List no: 266-046-0 | CAS no: 65997-17-3
Aluminosilicate Refractory Ceramic Fibres
are fibres covered by index number 650-017-00-8 in Annex VI, part 3, table 3.1 of Regulation (EC) No 1272/2008 of the European Parliament and of the Council of 16 December 2008 on classification, labelling and packaging of substances and mixtures, and fulfil the three following conditions: a) oxides of aluminium and silicon are the main components present (in the fibres) within variable concentration ranges b) fibres have a length weighted geometric mean diameter less two standard geometric errors of 6 or less micrometres (µm) c) alkaline oxide and alkali earth oxide (Na2O+K2O+CaO+MgO+BaO) content less or equal to 18% by weight
EC / List no: - | CAS no: -
Zirconia Aluminosilicate Refractory Ceramic Fibres
are fibres covered by index number 650-017-00-8 in Annex VI, part 3, table 3.1 of Regulation (EC) No 1272/2008 of the European Parliament and of the Council of 16 December 2008 on classification, labelling and packaging of substances and mixtures, and fulfil the three following conditions: a) oxides of aluminium, silicon and zirconium are the main components present (in the fibres) within variable concentration ranges b) fibres have a length weighted geometric mean diameter less two standard geometric errors of 6 or less micrometres (µm). c) alkaline oxide and alkali earth oxide (Na2O+K2O+CaO+MgO+BaO) content less or equal to 18% by weight
EC / List no: - | CAS no: -
-
-
Carc. 1B
232-645-0
9001-98-3
Eye Irrit. 2; STOT SE 3; Skin Irrit. 2; Resp. Sens. 1
A complex combination of hydrocarbons obtained by the treatment of solvent-dewaxed petroleum residual oils with activated charcoal for the removal of trace polar constituents and impurities.
309-710-8
100684-37-5
Carc. 1B
294-843-3
91770-57-9
Carc. 1B
A complex combination of hydrocarbons obtained by treatment of solvent-dewaxed petroleum residual oils with bleaching earth for the removal of trace polar constituents and impurities.
309-711-3
100684-38-6
Carc. 1B
A complex combination of hydrocarbons obtained by treatment of a residual oil with a natural or modified clay in either a contacting or percolation process to remove the trace amounts of polar compounds and impurities present. It consists of hydrocarbons having carbon numbers predominantly higher than C25 and boiling above approximately 400°C (752°F).
265-143-5
64742-41-2
Carc. 1B
A complex residuum from the atmospheric distillation of the butane-butylene stream. It consists of aliphatic hydrocarbons having carbon numbers predominantly in the range of C4 through C6.
270-795-9
68478-16-0
Carc. 1B; Muta. 1B; Asp. Tox. 1
A complex combination of hydrocarbons produced by solvent removal of paraffins from the residue of the distillation of acid-treated, hydrocracked heavy paraffins and boiling approximately above 380°C (716°F).
295-499-7
92061-86-4
Carc. 1B
292-656-1
90669-74-2
Carc. 1B
A complex combination of hydrocarbons obtained by treating a petroleum fraction with hydrogen in the presence of a catalyst. It consists of hydrocarbons having carbon numbers predominantly greater than C25 and boiling above approximately 400°C (752°F).
265-160-8
64742-57-0
Carc. 1B
A complex combination of hydrocarbons obtained as the solvent soluble fraction from C3 - C4 solvent deasphalting of a residuum. It consists of hydrocarbons having carbon numbers predominantly higher than C25 and boiling above approximately 400°C (752°F).
265-096-0
64741-95-3
Carc. 1B
A complex combination of hydrocarbons obtained by removal of long, branched chain hydrocarbons from a residual oil by solvent crystallization. It consists of hydrocarbons having carbon numbers predominantly greater than C25 and boiling above approximately 400°C (752°F).
265-166-0
64742-62-7
Carc. 1B

Export search results to: