Skip to Content
Skip to Content

Adopted opinions and previous consultations on applications for authorisation

Adopted opinions and previous consultations on applications for authorisation

 

This page provides further information on the applications for authorisation or review reports, which have undergone consultation. The applications for authorisation are in the opinion development phase until the final opinions of the Committees for Risk Assessment and Socio-economic Analysis have been adopted and sent to the European Commission. The European Commission's decision-making process can be followed through the comitology register, where further information is published about the REACH Committee's past and upcoming meetings.

 
0185-04 Initial 4-Nonylphenol, branched and linear, ethoxylated - - IDEXX EUROPE B.V. Use of 4-Nonylphenol, branched and linear, ethoxylated in vitro diagnostic veterinary products (SNAP tests and ELISA Plate tests) as an ingredient in the wash solutions, sample diluents, control solutions, conjugate solutions, SNAP wash solutions, tissue soaking buffers and detection solutions Opinion development
0171-04 Initial 4-Nonylphenol, branched and linear, ethoxylated - - Roche Diagnostics GmbH Use of Octyl- and Nonylphenolethoxylates in in vitro diagnostic (IVD) assays specified in Appendix 1 to the AoA. Opinion development
0191-01 Initial 4-Nonylphenol, branched and linear, ethoxylated - - Sekisui S-lec BV Roermond Industrial use as polymer additive in the manufacture of interlayer polymer films for laminated safety glass Opinion development
0186-02 Initial 4-Nonylphenol, branched and linear, ethoxylated - - Beckman Coulter Ireland Inc.;
Beckman Coulter GmbH
Formulation of NPnEO solutions in European sites for use as laboratory products. Laboratory products are used as intermediate solutions for preparation of finished laboratory products (finished goods) or in-process use. Opinion development
0172-01 Initial 4-Nonylphenol, branched and linear, ethoxylated - - GE Healthcare Bio-Sciences AB Industrial use of emulsifiers containing nonylphenols ethoxylated for the manufacture of chromatography resins used by the biopharmaceutical industry, food & beverage sector and academia Opinion development
0106-01 Initial Ammonium dichromate 232-143-1 7789-09-5 BAE Systems (Operations) Limited
Qioptiq Ltd
Industrial use of Ammonium Dichromate in the process of manufacturing holographic combiners for diffractive head-up displays intended to be used in military aircrafts Commission decided
0073-01 Initial Ammonium dichromate 232-143-1 7789-09-5 Veco B.V. Use of ammonium dichromate as photosensitive component in a polyvinyl alcohol photolithographic lacquer system for the manufacturing of mandrels which are used in nickel electroforming processes. Commission decided
0106-02 Initial Ammonium dichromate 232-143-1 7789-09-5 Display Technologies Limited Industrial use of Ammonium Dichromate in the process of manufacturing Cathode Ray Tubes for head up displays intended to be used in military and civilian aircrafts Commission decided
0049-01 Initial Ammonium dichromate 232-143-1 7789-09-5 Micrometal GmbH The use of Ammonium dichromate (ADC) as a photosensitizer for production of micro components Commission decided
0151-02 Initial Anthracene oil 292-602-7 90640-80-5 RÜTGERS Germany GmbH Use of AO for manufacture of formulations for various industrial uses Opinion development
0152-02 Initial Anthracene oil 292-602-7 90640-80-5 Rain Carbon bvba Use of AO for manufacture of formulations for various industrial uses Opinion development
0150-02 Initial Anthracene oil 292-602-7 90640-80-5 Koppers Denmark ApS Use of AO for manufacture of formulations for various industrial uses Opinion development
0153-02 Initial Anthracene oil 292-602-7 90640-80-5 BILBAINA DE ALQUITRANES, S.A. Use of AO for manufacture of formulations for various industrial uses Opinion development
0059-01 Initial Arsenic acid 231-901-9 7778-39-4 CIRCUIT FOIL LUXEMBOURG SARL Industrial use of arsenic acid for the treatment of copper foil used in the manufacture of Printed Circuit Board Commission decided
0008-01 Initial Bis(2-ethylhexyl) phthalate (DEHP) 204-211-0 117-81-7 VINYLOOP FERRARA S.p.A.; Stena Recycling AB; Plastic Planet srl Formulation of recycled soft PVC containing DEHP in compounds and dry-blends Authorisation expired
0008-02 Initial Bis(2-ethylhexyl) phthalate (DEHP) 204-211-0 117-81-7 VINYLOOP FERRARA S.p.A.; Stena Recycling AB; Plastic Planet srl Industrial use of recycled soft PVC containing DEHP in polymer processing by calendering, extrusion, compression and injection moulding to produce PVC articles Authorisation expired
0002-02 Initial Bis(2-ethylhexyl) phthalate (DEHP) 204-211-0 117-81-7 ARKEMA FRANCE Industrial use in polymer processing by calendering, spread coating, extrusion, injection moulding to produce PVC articles [except erasers, sex toys, small household items (<10cm ) that can be swallowed by children, clothing intended to be worn against the bare skin; also toys, cosmetics and food contact material (restricted under other EU regulation)] Withdrawn
0004-02 Initial Bis(2-ethylhexyl) phthalate (DEHP) 204-211-0 117-81-7 DEZA a.s. Industrial use in polymer processing by calendering, spread coating, extrusion, injection moulding to produce PVC articles [except erasers, sex toys, small household items (<10cm ) that can be swallowed by children, clothing intended to be worn against the bare skin; also toys, cosmetics and food contact material (restricted under other EU regulation)] Pending decision
0004-03 Initial Bis(2-ethylhexyl) phthalate (DEHP) 204-211-0 117-81-7 DEZA a.s. Industrial use of DEHP in ceramic sheets and printing pastes for production of capacitors and lambda sensor elements Pending decision
0003-02 Initial Bis(2-ethylhexyl) phthalate (DEHP) 204-211-0 117-81-7 Grupa Azoty Zakłady Azotowe Kędzierzyn S.A. Industrial use in polymer processing by calendering, spread coating, extrusion, injection moulding to produce PVC articles [except erasers, sex toys, small household items (<10cm ) that can be swallowed by children, clothing intended to be worn against the bare skin; also toys, cosmetics and food contact material (restricted under other EU regulation)] Pending decision
0003-01 Initial Bis(2-ethylhexyl) phthalate (DEHP) 204-211-0 117-81-7 Grupa Azoty Zakłady Azotowe Kędzierzyn S.A. Formulation of DEHP in compounds, dry-blends and Plastisol formulations Pending decision
0001-01 Initial Bis(2-ethylhexyl) phthalate (DEHP) 204-211-0 117-81-7 Rolls-Royce plc The processing of a stop-off formulation containing DEHP during the diffusion bonding and manufacture of aero engine fan blades. Commission decided
0002-01 Initial Bis(2-ethylhexyl) phthalate (DEHP) 204-211-0 117-81-7 ARKEMA FRANCE Formulation of DEHP in compounds, dry-blends and Plastisol formulations Withdrawn
0004-01 Initial Bis(2-ethylhexyl) phthalate (DEHP) 204-211-0 117-81-7 DEZA a.s. Formulation of DEHP in compounds, dry-blends and Plastisol formulations Pending decision
0007-01 Initial Bis(2-ethylhexyl) phthalate (DEHP) 204-211-0 117-81-7 Roxel (UK Rocket Motors) Ltd Industrial use of DEHP in manufacture of solid propellants and motor charges for rockets and tactical missiles Authorisation expired
0089-01 Initial Bis(2-methoxyethyl) ether 203-924-4 111-96-6 PMC ISOCHEM [application transferred from original Applicant: ISOCHEM due to a notified legal entity change] Use of diglyme as a process solvent in one step of the manufacturing of an Active Pharmaceutical Ingredient used in an anti-protozoal drug Commission decided
0088-01 Initial Bis(2-methoxyethyl) ether 203-924-4 111-96-6 Acton Technologies Limited Use of bis(2-methoxyethyl) ether (diglyme) as a carrier solvent in the formulation and subsequent application of sodium naphthalide etchant for fluoropolymer surface modification whilst preserving article structural integrity (in-house processes). Opinions adopted
0088-02 Initial Bis(2-methoxyethyl) ether 203-924-4 111-96-6 Acton Technologies Limited Use of bis(2-methoxyethyl) ether (diglyme) as a carrier solvent in the application of sodium naphthalide etchant for fluoropolymer surface modification whilst preserving article structural integrity (downstream user processes). Opinions adopted
0091-01 Initial Bis(2-methoxyethyl) ether 203-924-4 111-96-6 Merck KGaA Industrial use of diglyme as solvent in the manufacturing process of cryptand intermediates for further conversion into cryptand 221 and cryptand 222 Commission decided
0125-01 Initial Bis(2-methoxyethyl) ether 203-924-4 111-96-6 N.V. Ajinomoto OmniChem S.A. Use of diglyme as a solvent for the synthesis of the anti-HIV active pharmaceutical ingredient (API) dapivirine. Commission decided
0061-01 Initial Bis(2-methoxyethyl) ether (Diglyme) 203-924-4 111-96-6 Novartis Ringaskiddy Limited Use of diglyme as solvent in the manufacturing process of an intermediate for further conversion into a pharmaceutical compound used in medicinal products for treatment of respiratory diseases Commission decided
0087-01 Initial Bis(2-methoxyethyl) ether (Diglyme) 203-924-4 111-96-6 MAFLON S.P.A. Use of bis(2-methoxyethyl) ether (diglyme) as a carrier solvent in the formulation and subsequent application of sodium naphthalide etchant for fluoropolymer surface modification whilst preserving article structural integrity. Commission decided
0084-01 Initial Bis(2-methoxyethyl) ether (Diglyme) 203-924-4 111-96-6 Roche Diagnostics GmbH Use of diglyme as a process chemical in the manufacture of one specific type of Dynabeads® used in immunodiagnostic assays (in vitro diagnostic) Commission decided
0086-01 Initial Bis(2-methoxyethyl) ether (Diglyme) 203-924-4 111-96-6 Bracco Imaging s.p.a Use of bis(2-methoxyethyl) ether (diglyme) as a processing aid in the purification of 5-amino-2,4,6-triiodoisophthalic acid dichloride (EC 417- 220-1; CAS 37441-29-5) by precipitation Commission decided
0085-01 Initial Bis(2-methoxyethyl) ether (Diglyme) 203-924-4 111-96-6 Life Technologies AS Use of diglyme as a process chemical in the manufacture of Dynabeads. Commission decided
0053-01 Initial Chromic acid
231-801-5
236-881-5
13530-68-2
7738-94-5
Robert Bosch GmbH Hard chrome plating for gasoline and diesel injection applications Commission decided
0032-02 Initial Chromium trioxide 215-607-8 1333-82-0
  • Chemservice GmbH in its legal capacity as Only Representative of Brother CISA (Pty) Ltd. [application transferred from: “LANXESS Deutschland GmbH in its legal capacity as Only Representative of LANXESS CISA (Pty) Ltd.” due to a notified legal entity change].
  • Atotech Deutschland GmbH
  • Boeing Distribution, Inc. [name of applicant in the original application: Aviall Services Inc updated due to a notified change of corporate name]
  • Prospere Chemical Logistic OÜ as Only Representative of Aktyubinsk Chromium Chemicals Plant, Kazakhstan [application transferred from: “Prospere Logistic Baltic OÜ as Only Representative of Aktyubinsk Chromium Chemicals Plant, Kazakhstan” due to a notified change of Only Representative] [application transferred from original Applicant: "BONDEX TRADING LTD in its legal capacity as Only Representative of Aktyubinsk Chromium Chemicals Plant, Kazakhstan" due to a notified change of Only Representative]
  • CROMITAL S.P.A. in its legal capacity as Only Representative of Soda Sanayii A.S.
  • Elementis GmbH in its legal capacity as Only Representative of Elementis Chromium Inc [application transferred from original Applicant: "Elementis Chromium LLP in its legal capacity as Only Representative of Elementis Chromium Inc" due to a notified change of Only Representative]
  • MacDermid Enthone GmbH [name of co-applicant in the original application: Enthone GmbH updated due to a notified legal entity name change]
Functional Chrome Plating Opinions adopted
0064-04 Initial Chromium trioxide 215-607-8 1333-82-0 HAPOC GmbH & Co KG Use of Chromium trioxide in solid form and in aqueous solution of any composition to modify the properties of surfaces made of metal or plastic, with or without current flow, in category I. Opinions adopted
0100-01 Initial Chromium trioxide 215-607-8 1333-82-0 ZF Luftfahrttechnik GmbH Functional chrome plating Commission decided
0130-01 Initial Chromium trioxide 215-607-8 1333-82-0 Aloys F. Dornbracht GmbH & Co.KG Functional chrome plating with decorative character for sanitary applications Opinions adopted
0133-02 Initial Chromium trioxide 215-607-8 1333-82-0 Ideal Standard - Vidima AD Etching of plastics with chromium trioxide as pre-treatment step for electroplating processes Opinions adopted
0114–01 Initial Chromium trioxide 215-607-8 1333-82-0 Hansgrohe SE The use of chromium trioxide for electroplating of different types of substrates with the purpose to create a long-lasting high durability surface with bright (shiny) or matte look (Functional plating with decorative character) Commission decided
0032-06 Initial Chromium trioxide 215-607-8 1333-82-0
  • Chemservice GmbH in its legal capacity as Only Representative of Brother CISA (Pty) Ltd. [application transferred from: “LANXESS Deutschland GmbH in its legal capacity as Only Representative of LANXESS CISA (Pty) Ltd.” due to a notified legal entity change]
  • Atotech Deutschland GmbH
  • Boeing Distribution, Inc. [name of applicant in the original application: Aviall Services Inc updated due to a notified change of corporate name]
  • Prospere Chemical Logistic OÜ as Only Representative of Aktyubinsk Chromium Chemicals Plant, Kazakhstan [application transferred from: “Prospere Logistic Baltic OÜ as Only Representative of Aktyubinsk Chromium Chemicals Plant, Kazakhstan” due to a notified change of Only Representative] [application transferred from original Applicant: "BONDEX TRADING LTD in its legal capacity as Only Representative of Aktyubinsk Chromium Chemicals Plant, Kazakhstan" due to a notified change of Only Representative]
  • CROMITAL S.P.A. in its legal capacity as Only Representative of Soda Sanayii A.S.
  • Elementis GmbH in its legal capacity as Only Representative of Elementis Chromium Inc [application transferred from original Applicant: "Elementis Chromium LLP in its legal capacity as Only Representative of Elementis Chromium Inc" due to a notified change of Only Representative]
  • MacDermid Enthone GmbH [name of co-applicant in the original application: Enthone GmbH updated due to a notified legal entity name change]
Passivation of tin-plated steel (ETP) Opinions adopted
0034-02 Initial Chromium trioxide 215-607-8 1333-82-0 Grohe AG The use of Chromium Trioxide for a pre-treatment step (etching) in the electroplating process Commission decided
0054-02 Initial Chromium trioxide 215-607-8 1333-82-0 Praxair Surface Technologies GmbH Industrial spraying of chromium trioxide mixtures for the coating of metallic articles subject to harsh environment to ensure either a low temperaturecured coating for corrosion protection, or a high temperature corrosion & oxidation resistance with reduction of surface roughness or a high temperature adhesive, for aviation, power generation machinery, Oil and Gas and marine applications. Commission decided
0057-01 Initial Chromium trioxide 215-607-8 1333-82-0 Nexter Mechanics Industrial use of a mixture of chromium trioxide for the hard chromium plating of military armament steels parts which are thermomechanically stressed and in contact with oxidizing gas at high temperature, so as to ensure a thermal barrier with high melting point, resistance to wear and oxidation associated with weapons as well as resistance to impact and atmospheric corrosion. Commission decided
0057-02 Initial Chromium trioxide 215-607-8 1333-82-0 Nexter Mechanics Industrial use of a mixture of chromium trioxide for the hard chromium plating of military armament parts in order to ensure surface hardness, resistance to atmospheric corrosion, abrasive wear resistance and friction coefficient for parts in relative movement. Commission decided
0070-01 Initial Chromium trioxide 215-607-8 1333-82-0 FN HERSTAL S.A.
MANROY ENGINEERING LTD
Industrial use of chromium trioxide in the hard chromium coating of military small- and medium-caliber firearms barrel bores and auxiliary parts subject to thermal, mechanical and chemical stresses, in order to provide hardness, heat resistance and thermal barrier properties, as well as corrosion resistance, adhesion and low friction properties Commission decided
0072-02 Initial Chromium trioxide 215-607-8 1333-82-0 Souriau sas
Amphenol Limited
AMPHENOL SOCAPEX
ITT Cannon GmbH
TE UK Ltd
Industrial use of a mixture containing hexavalent chromium compounds in conversion coating and passivation of circular and rectangular connectors in order to meet the requirements of international standards and special requirements of industries subject to harsh environments. Commission decided
0095-03 Initial Chromium trioxide 215-607-8 1333-82-0 REACHLaw Ltd as Only Representative on behalf of Joint Stock Company “Novotroitsk Plant of Chromium Compounds” Functional chrome plating with decorative character Opinions adopted



Categories Display

Tagged as:

(click the tag to search for relevant content)


Route: .live2