Adopted opinions and previous consultations on applications for authorisation

Adopted opinions and previous consultations on applications for authorisation

Adopted opinions and previous consultations on applications for authorisation

This page provides further information on the applications for authorisation or review reports, which have undergone consultation. The applications for authorisation are in the opinion development phase until the final opinions of the Committees for Risk Assessment and Socio-economic Analysis have been adopted and sent to the European Commission. Its decision-making process can be followed through the comitology register, where further information is published about the REACH Committee's past and upcoming meetings.

On 1 February 2020, the United Kingdom (UK) withdrew from the EU. The transition period provided by the withdrawal agreement ended on 31 December 2020. As of 1 January 2021, an application for an authorisation submitted by a person established in the UK (except Northern Ireland) is no longer valid in the EU, unless that application has been transferred to a legal entity established in the EU or Northern Ireland before the end of the transition period. Therefore, authorisation applications and decisions in so far as these concern persons established in the UK (except Northern Ireland) are no longer considered valid. 

 

There are currently no ongoing consultations.
 
0329-01 Initial Chromium trioxide 215-607-8 1333-82-0 HAAS GROUP INTERNATIONAL SP. Z.O.O; Henkel Global Supply Chain B.V. Electroplating using chromium trioxide in aerospace and defence industry and its supply chains Opinion development Details
0330-01 Initial Chromium trioxide 215-607-8 1333-82-0 HAAS GROUP INTERNATIONAL SP. Z.O.O; Henkel Global Supply Chain B.V. Inorganic finish stripping using chromium trioxide in aerospace and defence industry and its supply chains Opinion development Details
0331-01 Initial Chromium trioxide 215-607-8 1333-82-0 HAAS GROUP INTERNATIONAL SP. Z.O.O; Henkel Global Supply Chain B.V. Formulation of mixtures with soluble Cr(VI) compounds for use in aerospace and defence industry and its supply chains for surface treatments Opinion development Details
0325-01 Initial Chromium trioxide 215-607-8 1333-82-0 HAAS GROUP INTERNATIONAL SP. Z.O.O; Henkel Global Supply Chain B.V. Anodise sealing using chromium trioxide in aerospace and defence industry and its supply chains Opinion development Details
0333-01 Initial Chromium trioxide 215-607-8 1333-82-0 HAAS GROUP INTERNATIONAL SP. Z.O.O; Henkel Global Supply Chain B.V. Pre-treatments: Deoxidising, pickling, etching and/or desmutting using chromium trioxide in aerospace and defence industry and its supply chains Opinion development Details
0332-01 Initial Chromium trioxide 215-607-8 1333-82-0 HAAS GROUP INTERNATIONAL SP. Z.O.O; Henkel Global Supply Chain B.V. Passivation of (non-Al) metallic coatings using chromium trioxide or sodium dichromate or potassium dichromate in aerospace and defence industry and its supply chains Opinion development Details
0326-01 Initial Chromium trioxide 215-607-8 1333-82-0 HAAS GROUP INTERNATIONAL SP. Z.O.O; Henkel Global Supply Chain B.V. Anodising using chromium trioxide in aerospace and defence industry and its supply chains Opinion development Details
0337-01 Review report Dichromium tris(chromate) 246-356-2 24613-89-6 HAAS GROUP INTERNATIONAL SP. Z.O.O; Henkel Global Supply Chain B.V. Chemical conversion coating using chromium trioxide, sodium dichromate, potassium dichromate and/or dichromium tris(chromate) in aerospace and defence industry and its supply chains Opinion development Details
0114–02 Initial Chromium trioxide 215-607-8 1333-82-0 Hansgrohe SE The use of chromium trioxide for a pre-treatment step (etching) in the electroplating process Commission decided Details
0114–01 Initial Chromium trioxide 215-607-8 1333-82-0 Hansgrohe SE The use of chromium trioxide for electroplating of different types of substrates with the purpose to create a long-lasting high durability surface with bright (shiny) or matte look (Functional plating with decorative character) Commission decided Details
0064-04 Initial Chromium trioxide 215-607-8 1333-82-0 HAPOC GmbH & Co KG Use of Chromium trioxide in solid form and in aqueous solution of any composition to modify the properties of surfaces made of metal or plastic, with or without current flow, in category I. Opinions adopted Details
0093-01 Initial Chromium trioxide 215-607-8 1333-82-0 HAPOC GmbH & Co KG Use of chromium trioxide in solid form and in aqueous solution of any composition to modify the properties of surfaces made of brass, bronze, copper and other copper alloys for medical engineering, aviation and automation products Commission decided Details
0064-03 Initial Chromium trioxide 215-607-8 1333-82-0 HAPOC GmbH & Co KG Use of chromium trioxide in solid form and in aqueous solution of any composition to modify the properties of surfaces made of metal or plastic, with or without current flow, in category II. Opinions adopted Details
0064-02 Initial Chromium trioxide 215-607-8 1333-82-0 HAPOC GmbH & Co KG Use of Chromium trioxide in solid form and in aqueous solution of any composition to modify the properties of surfaces made of metal or plastic, with or without current flow, in category III. Opinions adopted Details
0092-01 Initial Chromium trioxide 215-607-8 1333-82-0 HAPOC GmbH & Co KG Use of chromium trioxide in solid form and in aqueous solution of any composition to modify the properties of surfaces made of plastic, with or without current flow Opinions adopted Details
0064-01 Initial Chromium trioxide 215-607-8 1333-82-0 HAPOC GmbH & Co KG Use of chromium trioxide in dissolved and solid form to produce aqueous solutions of any composition for industrial application. Opinions adopted Details
0112-01 Initial Sodium dichromate 234-190-3
7789-12-0
10588-01-9
HAPOC GmbH & Co KG Use of sodium dichromate in molten bath form to modify surfaces, especially by blackening, of delicate medical products, specifically micro-surgical instruments Commission decided Details
0286-03 Initial Chromium trioxide 215-607-8 1333-82-0 Hartchrom-beck GmbH.; Kreft & Röhrig GmbH; Rudolf Jatzke Galvanik-Hartchrom Günter Holthöfer GmbH & Co. KG; Johann Maffei GmbH & Co. KG; Schornberg Galvanik GmbH; Wissing Hartchrom GmbH Chromium trioxide-based functional chrome plating of components with complex 3-dimensional geometry (not axially/rotationally symmetrical) requiring optimal tribological surface properties ( resulting from microcracked surface) to ensure low surface friction under lubrication Opinions adopted Details
0286-04 Initial Chromium trioxide 215-607-8 1333-82-0 Hartchrom-beck GmbH.; Kreft & Röhrig GmbH; Rudolf Jatzke Galvanik-Hartchrom Günter Holthöfer GmbH & Co. KG; Johann Maffei GmbH & Co. KG; Schornberg Galvanik GmbH; Wissing Hartchrom GmbH Chromium trioxide-based functional chrome plating of components with complex 3-dimensional geometry (not axially/rotationally symmetrical) requiring high wear resistant surfaces to withstand abrasive forces occurring in their application Opinions adopted Details
0286-01 Initial Chromium trioxide 215-607-8 1333-82-0 Hartchrom-beck GmbH.; Heinrich Schnarr GmbH; Kreft & Röhrig GmbH; Rudolf Jatzke Galvanik-Hartchrom Günter Holthöfer GmbH & Co. KG; Johann Maffei GmbH & Co. KG; Schornberg Galvanik GmbH; Wissing Hartchrom GmbH Chromium trioxide-based functional chrome plating of axially/rotationally symmetrical components requiring optimal tribological surface properties (resulting from microcracked surface) to ensure low surface friction under lubrication Opinions adopted Details
0286-02 Initial Chromium trioxide 215-607-8 1333-82-0 Hartchrom-beck GmbH.; Heinrich Schnarr GmbH; Kreft & Röhrig GmbH; Rudolf Jatzke Galvanik-Hartchrom Günter Holthöfer GmbH & Co. KG; Johann Maffei GmbH & Co. KG; Schornberg Galvanik GmbH; Wissing Hartchrom GmbH Chromium trioxide-based functional chrome plating of axially/rotationally symmetrical components requiring high wear resistant surfaces to withstand abrasive forces occurring in their application Opinions adopted Details
0282-01 Initial Chromium trioxide 215-607-8 1333-82-0 Hazet Werk Hermann Zerver GmbH & Co. KG Chromium trioxide-based functional chrome plating of hand tools to achieve a high level of abrasion resistance as well as corrosion and chemical resistance Opinions adopted Details
0323-01 Initial Chromium trioxide 215-607-8 1333-82-0 HDO Druckguß- und Oberflächentechnik GmbH; HDO SK s.r.o. Electroplating (by a long-term contractual supplier) of metal substrates using chromium trioxide to achieve functional surfaces with decorative character. Opinion development Details
0258-01 Initial Chromium trioxide 215-607-8 1333-82-0 Heinrich Schulte Söhne GmbH & Co. KG; Schulte Hartchrom GmbH Chromium trioxide-based functional chrome plating of large components and small components with complex geometries and/or requiring special approval procedures for their application in demanding sectors such as medical, aerospace, defence and mining industry Opinions adopted Details
0258-02 Initial Chromium trioxide 215-607-8 1333-82-0 Heinrich Schulte Söhne GmbH & Co. KG; Schulte Hartchrom GmbH Chromium trioxide-based functional chrome plating of small components with simple geometries not requiring special approval procedures for their application in demanding sectors such as hydraulic systems, food, paper and chemical industry Opinions adopted Details
0045-01 Initial Dichromium tris(chromate) 246-356-2 24613-89-6 Henkel AG & Co. KGaA Henkel Global SupplyChain B.V. Formulation of Mixtures Commission decided Details
0045-02 Initial Dichromium tris(chromate) 246-356-2 24613-89-6 Henkel AG & Co. KGaA
Henkel Global
Supply Chain B.V.
Use of dichromium tris(chromate) for surface treatment of metals such as aluminium, steel, zinc, magnesium, titanium, alloys, composites, sealings of anodic films. Commission decided Details
0334-01 Initial Chromium trioxide 215-607-8 1333-82-0 Henkel Global Supply Chain B.V. Passivation of stainless steel using chromium trioxide or sodium dichromate in aerospace and defence industry and its supply chains Opinion development Details
0327-01 Initial Chromium trioxide 215-607-8 1333-82-0 Henkel Global Supply Chain B.V. Chemical conversion coating using chromium trioxide, sodium dichromate and/or potassium dichromate in aerospace and defence industry and its supply chains Opinion development Details
0068-01 Initial Chromium trioxide 215-607-8 1333-82-0 Hoogovens Court Roll Surface Technologies V.O.F.
WAVEC GmbH
Trattamento Cilindri Laminazione S.r.l.
Walzen-Service-Center GmbH
NORD CHROME SAS
RHENAROLL SA
Texturing Technology Limited – [Decision discontinued as of 01/01/2021]
NC POLAND Sp.z. o.o.
Functional chrome plating of work rolls used in the steel and aluminium industry. Commission decided Details
0174-01 Initial 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated - - Hospira Zagreb d.o.o., a Pfizer company The use of 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated (4-tert-OPnEO))(Triton X-100) as a surfactant in the manufacture of one biopharmaceutical protein, a biosimilar product, used to prevent infection and neutropenic fevers. Commission decided Details
0238-01 initial Chromium trioxide 215-607-8 1333-82-0 Hueck-Engraving GmbH & Co.KG Functional chrome plating of high-quality stainless-steel press plates for the premium wood-based materials industry Opinions adopted Details
0219-01 Initial Chromium trioxide 215-607-8 1333-82-0 Husqvarna AB Industrial use of a mixture containing Chromium Trioxide in functional chrome plating of the saw chain cutter links in order to meet stay sharp and durability requirements for use with chainsaws. Commission decided Details
0039-01 Initial Sodium dichromate 234-190-3
7789-12-0
10588-01-9
HyChem – Química Sustentável, S.A [name of applicant in the original application: "SOLVAY PORTUGAL - PRODUTOS QUIMICOS S.A. " updated due to a notified corporate name change] Use of Sodium dichromate as an additive for suppressing parasitic reactions and oxygen evolution, pH buffering and cathode corrosion protection in the electrolytic manufacture of sodium chlorate with or without subsequent production of chlorine dioxide or sodium chlorite Commission decided Details
0133-02 Initial Chromium trioxide 215-607-8 1333-82-0 Ideal Standard - Vidima AD Etching of plastics with chromium trioxide as pre-treatment step for electroplating processes Commission decided Details
0133-01 Iitital Chromium trioxide 215-607-8 1333-82-0 Ideal Standard - Vidima AD;
Ideal Standard Produktions-GmbH;
Jado Iberia-Produtos Metalurgicos Sociedade Unipessoal LDA (withdrawn)
Electroplating of different types of substrates using chromium trioxide to achieve functional surfaces with high durability and a bright or matt silvery appearance for sanitary applications Commission decided Details
0185-04 Initial 4-Nonylphenol, branched and linear, ethoxylated - - IDEXX B.V. [name of the applicant in the original application: “IDEXX EUROPE B.V.” updated due to a notified corporate name change] Use of 4-Nonylphenol, branched and linear, ethoxylated in vitro diagnostic veterinary products (SNAP tests and ELISA Plate tests) as an ingredient in the wash solutions, sample diluents, control solutions, conjugate solutions, SNAP wash solutions, tissue soaking buffers and detection solutions Commission decided Details
0185-03 Initial 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated - - IDEXX B.V. [name of the applicant in the original application: “IDEXX EUROPE B.V.” updated due to a notified corporate name change]
IDEXX Montpellier SAS
Use of 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated in vitro diagnostic veterinary products (SNAP tests and ELISA Plate tests) as an ingredient in the wash solutions, sample diluents, control solutions, conjugate solutions, SNAP wash solutions, tissue soaking buffers and detection solutions Commission decided Details
0185-01 Initial 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated - - IDEXX Montpellier SAS Use of 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated as detergent in the technical manufacturing of in vitro diagnostic veterinary ELISA Plate tests (plate coating) to prevent the non-specific binding of unwanted macromolecules Commission decided Details
0185-02 Initial 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated - - IDEXX Montpellier SAS Formulation of 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated in the manufacture of sample diluents and standard solutions used in in vitro diagnostic veterinary ELISA Plate tests used for the detection of infectious diseases in livestock and poultry Commission decided Details
0105-01 Initial Sodium dichromate 234-190-3
7789-12-0
10588-01-9
ILARIO ORMEZZANO - SAI s.r.l. [name of applicant in the original application: Ilario Ormezzano Sai Spa updated due to a notified name change] Repackaging of Sodium Dichromate to be supplied as a mordant in the dyeing of wool as sliver and/or yarn with dark colours in industrial settings Opinions adopted Details
0105-02 Initial Sodium dichromate 234-190-3
7789-12-0
10588-01-9
ILARIO ORMEZZANO - SAI s.r.l. [name of applicant in the original application: Ilario Ormezzano Sai Spa updated due to a notified name change] Use of Sodium Dichromate as a mordant in the dyeing of wool as sliver and/or yarn with dark colours in industrial settings Opinions adopted Details
0121-01 Initial Pentazinc chromate octahydroxide 256-418-0 49663-84-5 Indestructible Paint Ltd. – [Decision discontinued as of 01/01/2021] Formulation of mixtures Commission decided Details
0149-01 Initial Pitch, coal tar, high temp. 266-028-2 65996-93-2 Industrial Quimica del Nalon, S.A. Use of CTPht for manufacture of formulations for various industrial uses Commission decided Details
0013-01 Initial Hexabromocyclododecane (HBCDD), alpha-hexabromocyclododecane, beta-hexabromocyclododecane, gamma-hexabromocyclododecane
221-695-9
247-148-4
3194-55-6
25637-99-4
134237-50-6
134237-51-7
134237-52-8
INEOS Styrenics Netherlands BV
INEOS Styrenics Ribecourt SAS
INEOS Styrenics Wingles SAS
Synthos Dwory 7 spółka z ograniczoną odpowiedzialnością spółka komandytowo-akcyjna.
Synthos Kralupy a.s.
StyroChem Finland Oy
Monotez SA
RP Compounds GmbH
Synbra Technology bv
Sunpor Kunststoff GmbH
Dunastyr Polystyrene Manufacturing C. Co. Ltd
Versalis SpA
Unipol Holland bv
Formulation of flame retarded expanded polystyrene (EPS) to solid unexpanded pellets using hexabromocyclododecane as the flame retardant additive (for onward use in building applications) Authorisation expired Details
0013-02 Initial Hexabromocyclododecane (HBCDD), alpha-hexabromocyclododecane, beta-hexabromocyclododecane, gamma-hexabromocyclododecane
221-695-9
247-148-4
3194-55-6
25637-99-4
134237-50-6
134237-51-7
134237-52-8
INEOS Styrenics Netherlands BV
INEOS Styrenics Ribecourt SAS
INEOS Styrenics Wingles SAS
Synthos Dwory 7 spółka z ograniczoną odpowiedzialnością spółka komandytowo-akcyjna.
Synthos Kralupy a.s.
StyroChem Finland Oy
Monotez SA
RP Compounds GmbH
Synbra Technology bv
Sunpor Kunststoff GmbH
Dunastyr Polystyrene Manufacturing C. Co. Ltd
Versalis SpA
Unipol Holland bv
Manufacture of flame retarded expanded polystyrene (EPS) articles for use in building applications Authorisation expired Details
0194-01 Initial 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated - - Instrumentation Laboratory SpA Use as a lysing agent for red blood cells in blood analysis diagnostic device. Commission decided Details
0075-01 Initial Sodium dichromate 234-190-3
7789-12-0
10588-01-9
Jacobs Douwe Egberts
DE GmbH
Dr. Otto Suwelack Nachf.
GmbH & Co. KG
Européenne de Lyophilisation S.A.
Use of sodium dichromate as a corrosion inhibitor in ammonia absorption deep cooling systems as applied in the industrial production of freeze dried products such as coffee, herbs, spices and comparable products. Commission decided Details
0169-01 Initial 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated - - Janssen Vaccines & Prevention BV
Janssen Biologics B.V.
4-tert-Octylphenol ethoxylate is used as a lysing agent for the permeabilization of the host cell membrane to release adenovirus particles used for the manufacture of vaccines. Its use allows the selective elimination of enveloped adventitious viruses and is compatible with the chemicals needed to control the host cell DNA precipitation in the next process step. Commission decided Details
0256-01 Initial Chromium trioxide 215-607-8 1333-82-0 KaVo Dental GmbH Chromium trioxide based functional chrome plating of dental instruments applied by professionals for dental treatment Opinions adopted Details