Adopted opinions and previous consultations on applications for authorisation

Adopted opinions and previous consultations on applications for authorisation

Adopted opinions and previous consultations on applications for authorisation

This page provides further information on the applications for authorisation or review reports, which have undergone consultation. The applications for authorisation are in the opinion development phase until the final opinions of the Committees for Risk Assessment and Socio-economic Analysis have been adopted and sent to the European Commission. Its decision-making process can be followed through the comitology register, where further information is published about the REACH Committee's past and upcoming meetings.

On 1 February 2020, the United Kingdom (UK) withdrew from the EU. The transition period provided by the withdrawal agreement ended on 31 December 2020. As of 1 January 2021, an application for an authorisation submitted by a person established in the UK (except Northern Ireland) is no longer valid in the EU, unless that application has been transferred to a legal entity established in the EU or Northern Ireland before the end of the transition period. Therefore, authorisation applications and decisions in so far as these concern persons established in the UK (except Northern Ireland) are no longer considered valid. 

 

There are currently no ongoing consultations.
 
0155-01 Initial 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated - - Kedrion S.p.A Use of 4-tert-OPnEO as Triton X-100 as detergent for virus inactivation in the manufacturing process of the human plasma-derived medicinal products Plasmagrade/Plasmasafe and Resusix, as well as Plasminogen (pre-commercialization name) and any subsequent commercialization brand Commission decided
0193-01 Initial 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated - - Yposkesi Use of 4-tert-OPnEO for its non-ionic detergent properties for the cell membrane lysis and viral clearance during the development and manufacturing of viral vectors in medicinal products dedicated to human use (Investigational and Authorized Advanced Therapy Medicinal Product). Opinions adopted
0138-01 Initial 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated - - Boehringer Ingelheim Pharma
GmbH & Co. KG; Boehringer
Ingelheim RCV GmbH & Co KG
Use of 4-tert-OPnEO in a washing buffer to purify biological APIs (active pharmaceutical ingredients) during the production of Palivizumab and Moxetumomab pasudotox-tdfk. Commission decided
0226-01 Initial 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated - - LETI Pharma, S.L.U. [name of applicant in the original application: Laboratorios LETI, S.L.U. updated due to a notified change of corporate name] Use of 4-tert-OPnEO in aqueous buffers during the manufacturing process of the active pharmaceutical ingredient (Protein Q) of the veterinary vaccine LetiFend® Opinions adopted
0115-03 Initial Potassium chromate 232-140-5 7789-00-6 Saes Getters S.p.A. Use of alkali metal dispensers containing potassium chromate for production of photocathodes. Commission decided
0115-04 Initial Sodium chromate 231-889-5 7775-11-3 Saes Getters S.p.A. Use of alkali metal dispensers containing sodium chromate for production of photocathodes. Commission decided
0073-01 Initial Ammonium dichromate 232-143-1 7789-09-5 Veco B.V. Use of ammonium dichromate as photosensitive component in a polyvinyl alcohol photolithographic lacquer system for the manufacturing of mandrels which are used in nickel electroforming processes. Commission decided
0152-02 Initial Anthracene oil 292-602-7 90640-80-5 Rain Carbon bvba Use of AO for manufacture of formulations for various industrial uses Commission decided
0151-02 Initial Anthracene oil 292-602-7 90640-80-5 Rain Carbon Germany GmbH [name of applicant in the original application: RÜTGERS Germany GmbH updated due to a notified change of corporate name] Use of AO for manufacture of formulations for various industrial uses Commission decided
0153-02 Initial Anthracene oil 292-602-7 90640-80-5 BILBAINA DE ALQUITRANES, S.A. Use of AO for manufacture of formulations for various industrial uses Commission decided
0150-02 Initial Anthracene oil 292-602-7 90640-80-5 Koppers Denmark ApS Use of AO for manufacture of formulations for various industrial uses Commission decided
0217-02 Initial Bis(2-methoxyethyl) ether 203-924-4 111-96-6 Acton Technologies Limited Use of bis(2-methoxyethyl) ether (diglyme) as a carrier solvent in the application of sodium naphthalide etchant for fluoropolymer surface modification whilst preserving article structural integrity (downstream user processes) Commission decided
0088-02 Initial Bis(2-methoxyethyl) ether 203-924-4 111-96-6 Acton Technologies Limited Use of bis(2-methoxyethyl) ether (diglyme) as a carrier solvent in the application of sodium naphthalide etchant for fluoropolymer surface modification whilst preserving article structural integrity (downstream user processes). Commission decided
0217-01 Initial Bis(2-methoxyethyl) ether 203-924-4 111-96-6 Acton Technologies Limited Use of bis(2-methoxyethyl) ether (diglyme) as a carrier solvent in the formulation and subsequent application of sodium naphthalide etchant for fluoropolymer surface modification whilst preserving article structural integrity (in-house processes) Commission decided
0088-01 Initial Bis(2-methoxyethyl) ether 203-924-4 111-96-6 Acton Technologies Limited Use of bis(2-methoxyethyl) ether (diglyme) as a carrier solvent in the formulation and subsequent application of sodium naphthalide etchant for fluoropolymer surface modification whilst preserving article structural integrity (in-house processes). Commission decided
0087-01 Initial Bis(2-methoxyethyl) ether (Diglyme) 203-924-4 111-96-6 MAFLON S.P.A. Use of bis(2-methoxyethyl) ether (diglyme) as a carrier solvent in the formulation and subsequent application of sodium naphthalide etchant for fluoropolymer surface modification whilst preserving article structural integrity. Commission decided
0086-01 Initial Bis(2-methoxyethyl) ether (Diglyme) 203-924-4 111-96-6 Bracco Imaging s.p.a Use of bis(2-methoxyethyl) ether (diglyme) as a processing aid in the purification of 5-amino-2,4,6-triiodoisophthalic acid dichloride (EC 417- 220-1; CAS 37441-29-5) by precipitation Commission decided
0211-01 Initial Chromium trioxide 215-607-8 1333-82-0 Tata Steel IJmuiden BV; Tata Steel UK Ltd - [Application void as of 01/01/2021] Use of Chromium (VI) Trioxide and Sodium Dichromate for Passivation of Electrolytic Tinplate (ETP) Opinions adopted
0211-02 Initial Sodium dichromate 234-190-3 10588-01-9 Tata Steel IJmuiden BV; Tata Steel UK Ltd - [Application void as of 01/01/2021] Use of Chromium (VI) Trioxide and Sodium Dichromate for Passivation of Electrolytic Tinplate (ETP) Opinions adopted
0134-02 Initial Chromium trioxide 215-607-8 1333-82-0 ThyssenKrupp Rasselstein GmbH Use of Chromium (VI) Trioxide for Electrolytic Chromium Coating of Steel (ECCS) Commission decided
0221-01 Initial Chromium trioxide 215-607-8 1333-82-0 U. S. Steel Košice, s.r.o. Use of Chromium (VI) Trioxide for Passivation of Electrolytic Tinplate (ETP). Opinion development
0134-01 Initial Chromium trioxide 215-607-8 1333-82-0 ThyssenKrupp Rasselstein GmbH Use of Chromium (VI) Trioxide for Passivation of tinplated steel (ETP) Commission decided
0056-01 Initial Chromium trioxide 215-607-8 1333-82-0 Rimex Metals (UK) Ltd – [Decision discontinued as of 01/01/2021] Use of chromium trioxide as an oxidising and hardening agent in the manufacture of coloured stainless steel Discontinued as of 01 January 2021
0213-01 Initial Chromium trioxide 215-607-8 1333-82-0 Steel Color S.p.A. Use of chromium trioxide as colouring and hardening agent for stainless steel plates Opinions adopted
0096-01 Initial Chromium trioxide 215-607-8 1333-82-0 HAAS GROUP INTERNATIONAL SP. Z.O.O [application transferred from: “Wesco Aircraft EMEA, LTD” due to a notified legal entity change. Previously application transferred from original applicant: Haas Group International SCM Ltd due to a notified legal entity change] Use of chromium trioxide for chemical conversion and slurry coating applications by aerospace companies and their suppliers Commission decided
0231-01 Initial Chromium trioxide 215-607-8 1333-82-0 Kesseboehmer Beschlagsysteme GmbH&Co.KG Use of chromium trioxide for decorative/functional application in the furniture, sanitary and automotive sector. Opinion development
0241-01 Initial Chromium trioxide 215-607-8 1333-82-0 Gessi S.p.A.
San Marco Rubinetteria S.r.l.
Use of chromium trioxide for electroplating of metal substrates with the purpose of creating a long-lasting high durability surface with bright look for kitchen and bathroom sanitaryware (functional plating with decorative character) Opinion development
0102-01 Initial Chromium trioxide 215-607-8 1333-82-0 Clariant Produkte (Deutschland) GmbH Use of chromium trioxide in a catalyst for the dehydrogenation of propane to propene Commission decided
0033-01 Initial Chromium trioxide 215-607-8 1333-82-0 Oy Kromatek Ab; Kova-Kromi Oy; CrTe-Plating Oy; Saizeri Plating Oy; Turun Kovakromi Oy; Veljekset Wallenius Oy; Pirkan Kovakromaus Oy Use of chromium trioxide in Cr(VI) based functional plating Commission decided
0064-01 Initial Chromium trioxide 215-607-8 1333-82-0 HAPOC GmbH & Co KG Use of chromium trioxide in dissolved and solid form to produce aqueous solutions of any composition for industrial application. Opinions adopted
0067-01 Initial Chromium trioxide 215-607-8 1333-82-0 Abloy Oy Use of chromium trioxide in electroplating of mechanical and electromechanical cylinders, cam- and padlocks, electromechanical lock cases and architectural hardware. Commission decided
0127-01 Initial Chromium trioxide 215-607-8 1333-82-0 MAHLE Ventiltrieb GmbH
MAHLE Polska Sp. z o.o.
Use of chromium trioxide in functional chrome plating of valves used in engines of light gasoline and diesel vehicles and in heavy duty diesel combustion engines Commission decided
0093-01 Initial Chromium trioxide 215-607-8 1333-82-0 HAPOC GmbH & Co KG Use of chromium trioxide in solid form and in aqueous solution of any composition to modify the properties of surfaces made of brass, bronze, copper and other copper alloys for medical engineering, aviation and automation products Commission decided
0064-04 Initial Chromium trioxide 215-607-8 1333-82-0 HAPOC GmbH & Co KG Use of Chromium trioxide in solid form and in aqueous solution of any composition to modify the properties of surfaces made of metal or plastic, with or without current flow, in category I. Opinions adopted
0064-03 Initial Chromium trioxide 215-607-8 1333-82-0 HAPOC GmbH & Co KG Use of chromium trioxide in solid form and in aqueous solution of any composition to modify the properties of surfaces made of metal or plastic, with or without current flow, in category II. Opinions adopted
0064-02 Initial Chromium trioxide 215-607-8 1333-82-0 HAPOC GmbH & Co KG Use of Chromium trioxide in solid form and in aqueous solution of any composition to modify the properties of surfaces made of metal or plastic, with or without current flow, in category III. Opinions adopted
0092-01 Initial Chromium trioxide 215-607-8 1333-82-0 HAPOC GmbH & Co KG Use of chromium trioxide in solid form and in aqueous solution of any composition to modify the properties of surfaces made of plastic, with or without current flow Opinions adopted
0147-01 Initial Pitch, coal tar, high temp. 266-028-2 65996-93-2 BILBAINA DE ALQUITRANES, S.A. Use of CTPht as a binder in the manufacture of clay targets Commission decided
0148-01 Initial Pitch, coal tar, high temp. 266-028-2 65996-93-2 DEZA a.s. Use of CTPht as a binder in the manufacture of clay targets Commission decided
0152-01 Initial Pitch, coal tar, high temp. 266-028-2 65996-93-2 Rain Carbon bvba Use of CTPht for manufacture of formulations for various industrial uses Commission decided
0151-01 Initial Pitch, coal tar, high temp. 266-028-2 65996-93-2 Rain Carbon Germany GmbH [name of applicant in the original application: RÜTGERS Germany GmbH updated due to a notified change of corporate name] Use of CTPht for manufacture of formulations for various industrial uses Commission decided
0150-01 Initial Pitch, coal tar, high temp. 266-028-2 65996-93-2 Koppers Denmark ApS Use of CTPht for manufacture of formulations for various industrial uses Commission decided
0153-01 Initial Pitch, coal tar, high temp. 266-028-2 65996-93-2 BILBAINA DE ALQUITRANES, S.A. Use of CTPht for manufacture of formulations for various industrial uses Commission decided
0149-01 Initial Pitch, coal tar, high temp. 266-028-2 65996-93-2 Industrial Quimica del Nalon, S.A. Use of CTPht for manufacture of formulations for various industrial uses Commission decided
0005-01 Initial Dibutyl phthalate (DBP) 201-557-4 84-74-2 DEZA a.s. Use of DBP as an absorption solvent in a closed system in the manufacture of maleic anhydride Commission decided
0006-01 Initial Dibutyl phthalate (DBP) 201-557-4 84-74-2 Sasol-Huntsman GmbH & Co. KG Use of DBP as an absorption solvent in a closed system in the manufacture of maleic anhydride Commission decided
0005-02 Initial Dibutyl phthalate (DBP) 201-557-4 84-74-2 DEZA a.s. Use of DBP in propellants
Formulation: Industrial use of DBP as a burning rate surface moderant, plasticiser and/or coolant in the formulation of nitrocellulose-based propellant grains.
Use at industrial site: Industrial use of DBP-containing propellant grains in manufacture of ammunition for military and civilian uses, and pyrocartridges for aircraft ejection seat safety systems [includes propellants for police force ammunition and excludes propellants intended for manual, private reloading of ammunition cartridges by civilian users, i.e., licensed individual sports shooters and hunters. No direct consumer use of DBP or its mixtures is covered by this Use.]
Commission decided
0009-01 Initial Diarsenic trioxide 215-481-4 1327-53-3 Boliden Kokkola Oy Use of diarsenic trioxide in the purification of metal impurities from the leaching solution in the zinc electrowinning process Commission decided
0116-01 Initial Dichromium tris(chromate) 246-356-2 24613-89-6 HAAS GROUP INTERNATIONAL SP. Z.O.O [application transferred from: “Wesco Aircraft EMEA, LTD (UK)” due to a notified legal entity change] Use of dichromium tris(chromate) for chemical conversion coating applications by aerospace and defence companies and their associated supply chains Commission decided
0045-02 Initial Dichromium tris(chromate) 246-356-2 24613-89-6 Henkel AG & Co. KGaA
Henkel Global
Supply Chain B.V.
Use of dichromium tris(chromate) for surface treatment of metals such as aluminium, steel, zinc, magnesium, titanium, alloys, composites, sealings of anodic films. Commission decided
0232-01 Initial Dichromium tris(chromate) 246-356-2 24613-89-6 Monroe Czechia s.r.o. Use of dichromium tris(chromate) in a post-treatment step of the autodeposition coating process of shock absorbers for automotive vehicles. Opinion development
0085-01 Initial Bis(2-methoxyethyl) ether (Diglyme) 203-924-4 111-96-6 Life Technologies AS Use of diglyme as a process chemical in the manufacture of Dynabeads. Commission decided
0084-01 Initial Bis(2-methoxyethyl) ether (Diglyme) 203-924-4 111-96-6 Roche Diagnostics GmbH Use of diglyme as a process chemical in the manufacture of one specific type of Dynabeads® used in immunodiagnostic assays (in vitro diagnostic) Commission decided
0089-01 Initial Bis(2-methoxyethyl) ether 203-924-4 111-96-6 PMC ISOCHEM [application transferred from original Applicant: ISOCHEM due to a notified legal entity change] Use of diglyme as a process solvent in one step of the manufacturing of an Active Pharmaceutical Ingredient used in an anti-protozoal drug Commission decided
0125-01 Initial Bis(2-methoxyethyl) ether 203-924-4 111-96-6 N.V. Ajinomoto OmniChem S.A. Use of diglyme as a solvent for the synthesis of the anti-HIV active pharmaceutical ingredient (API) dapivirine. Commission decided
0061-01 Initial Bis(2-methoxyethyl) ether (Diglyme) 203-924-4 111-96-6 Novartis Ringaskiddy Limited Use of diglyme as solvent in the manufacturing process of an intermediate for further conversion into a pharmaceutical compound used in medicinal products for treatment of respiratory diseases Commission decided
0154-04 Initial 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated - - Siemens Healthcare Diagnostics Products GmbH Use of IVD-kit reagents on diagnostic analyser systems Opinions adopted
0154-05 Initial 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated - - Siemens Healthcare Diagnostics Products GmbH Use of IVD-wash solutions on diagnostic analyser systems Opinions adopted
0156-01 Initial 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated - - Sanofi Pasteur Use of Octoxynol-9 for virus splitting and inactivation step in the manufacturing of influenza vaccines Commission decided
0171-03 Initial 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated - - Roche Diagnostics GmbH Use of Octyl- and Nonylphenolethoxylates in in vitro diagnostic (IVD) assays specified in Appendix 1 to the AoA. Opinions adopted
0171-04 Initial 4-Nonylphenol, branched and linear, ethoxylated - - Roche Diagnostics GmbH Use of Octyl- and Nonylphenolethoxylates in in vitro diagnostic (IVD) assays specified in Appendix 1 to the AoA. Opinions adopted
0171-01 Initial 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated - - Roche Diagnostics GmbH Use of Octyl- and Nonylphenolethoxylates in the formulation and filling of in vitro diagnostic (IVD) assays specified in Appendix 1 to the AoA. Opinions adopted
0171-02 Initial 4-Nonylphenol, branched and linear, ethoxylated - - Roche Diagnostics GmbH Use of Octyl- and Nonylphenolethoxylates in the formulation and filling of in vitro diagnostic (IVD) assays specified in Appendix 1 to the AoA. Opinions adopted
0171-05 Initial 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated - - Roche Diagnostics GmbH Use of Octyl- and Nonylphenolethoxylates in the production of proteins and the conjugation of latex beads, both being used as components or for the production of components of in vitro diagnostic (IVD) assays, research or quality control products and other, e.g. analytical applications (processes specified in Appendix 1 to the AoA) Opinions adopted
0171-06 Initial 4-Nonylphenol, branched and linear, ethoxylated - - Roche Diagnostics GmbH Use of Octyl- and Nonylphenolethoxylates in the production of proteins and the conjugation of latex beads, both being used as components or for the production of components of in vitro diagnostic (IVD) assays, research or quality control products and other, e.g. analytical applications (processes specified in Appendix 1 to the AoA) Opinions adopted
0196-01 Initial 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated - - Vetter Pharma-Fertigung GmbH & Co. KG Use of Octylphenolethoxylates as emulsifier in the siliconisation of glass containers (syringes and cartridges) used as primary packaging material for 44 medicinal products of several pharmaceutical companies listed in the confidential Appendix 1 to the AoA. These products cover several therapeutic areas, and approx. 40 % of them are listed on the WHO Model List of Essential Medicines (EML). Opinions adopted
0160-01 Initial 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated - - Roche Diagnostics GmbH Use of Octylphenolethoxylates as emulsifier in the siliconisation of glass containers used as primary packaging for medicinal products (NeoRecormon® and MIRCERA®). Opinions adopted
0159-01 Initial 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated - - Nuova Ompi S.r.l. unipersonale Use of Octylphenolethoxylates as emulsifier in the siliconisation of glass containers used as primary packaging for one specific medicinal product (NeoRecormon®) of one pharmaceutical company. Commission decided
0161-01 Initial 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated - - Vetter Pharma-Fertigung GmbH & Co. KG Use of Octylphenolethoxylates as emulsifier in the siliconisation of glass containers used as primary packaging for two specific medicinal products (NutropinAq® and Lucentis®) of one pharmaceutical company. Commission decided
0173-01 Initial 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated - - Siemens Healthcare Diagnostics Products Ltd - [Application void as of 01/01/2021] Use of OPE as detergent in the production of bead components for in-vitro diagnostic kits for an immunoassay platform Application void as of 01 January 2021
0154-03 Initial 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated - - Siemens Healthcare Diagnostics Products GmbH Use of OPE in formulation of IVD- wash solutions Opinions adopted
0154-02 Initial 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated - - Siemens Healthcare Diagnostics Products GmbH Use of OPE in formulation of IVD-kit reagents Opinions adopted
0154-01 Initial 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated - - Siemens Healthcare Diagnostics Products GmbH Use of OPE in isolation of protein from recombinant cell cultures for the production of IVD-kits (protein cell extraction) Opinions adopted
0121-02 Initial Pentazinc chromate octahydroxide 256-418-0 49663-84-5 Ramboll Belgium BVBA [application transferred from: “Indestructible Paint Ltd.” due to a notified legal entity change] Use of pentazinc chromate octahydroxide in stoved epoxy primer for corrosion protection of aircraft engine components in aerospace and aeroderivative applications Commission decided
0118-02 Initial Pentazinc chromate octahydroxide 256-418-0 49663-84-5 Boeing Distribution, Inc. [name of applicant in the original application: Aviall Services Inc updated due to a notified change of corporate name];
Finalin GmbH
Use of pentazinc chromate octahydroxide in wash primer, fuel tank primer and aluminized primer for the purpose of corrosion protection in aeronautic applications Commission decided
0115-01 Initial Potassium chromate 232-140-5 7789-00-6 Saes Getters S.p.A. Use of potassium chromate in the fabrication of alkali metal dispensers for production of photocathodes. Commission decided
0098-01 Initial Potassium dichromate 231-906-6 7778-50-9 HAAS GROUP INTERNATIONAL SP. Z.O.O [application transferred from: “Wesco Aircraft EMEA, LTD” due to a notified legal entity change. Previously application transferred from original applicant: Haas Group International SCM Ltd due to a notified legal entity change] Use of potassium dichromate for sealing after anodizing applications by aerospace companies and their suppliers Commission decided
0044-02 Initial Potassium dichromate 231-906-6 7778-50-9 Brenntag Chemicals Distribution (Ireland) Ltd [application transferred from original Applicant: Brenntag UK Ltd due to a notified legal entity change] Use of potassium dichromate for surface treatment of metals such as aluminium, steel, zinc, magnesium, titanium, alloys, composites, sealings of anodic films Commission decided
0062-02 Initial Potassium dichromate 231-906-6 7778-50-9 Gentrochema BV Use of potassium dichromate for surface treatment of metals such as aluminium, steel, zinc, magnesium, titanium, alloys, composites, sealings of anodic films. Commission decided
0047-02 Initial Potassium hydroxyoctaoxodizincatedichromate 234-329-8 11103-86-9 PPG Industries (UK) Ltd
Finalin GmbH
PPG Europe B.V. in its legal capacity as Only Representative of PRC DeSoto International Inc [application transferred from original Applicant: “PPG Central (UK) Ltd in its legal capacity as Only Representative of PRC DeSoto International Inc.” due to a notified change of Only Representative]
PPG Coatings SA
Boeing Distribution, Inc. [name of applicant in the original application: Aviall Services Inc updated due to a notified change of corporate name]
Use of potassium hydroxyoctaoxodizincatedichromate in paints, in primer, sealants, and coatings (including as wash primers) Commission decided
0136-01 Initial Sodium chromate 231-889-5 7775-11-3 Ariston Thermo SpA Use of sodium chromate as an anticorrosion agent of the carbon steel in sealed circuit of gas absorption appliances up to 0.70% by weight (as Cr6+) in the refrigerant solution Opinions adopted
0099-02 Initial Sodium chromate 231-889-5 7775-11-3
  • Boeing Distribution, Inc. [name of applicant in the original application: Aviall Services Inc updated due to a notified change of corporate name]
  • HAAS GROUP INTERNATIONAL SP. Z.O.O [application transferred from: “Wesco Aircraft EMEA, LTD” due to a notified legal entity change. Previously application transferred from original applicant: Haas Group International SCM Ltd due to a notified legal entity change]
Use of sodium chromate for sealing after anodizing, chemical conversion coating, pickling and etching applications by aerospace companies and their suppliers Commission decided
0115-02 Initial Sodium chromate 231-889-5 7775-11-3 Saes Getters S.p.A. Use of sodium chromate in the fabrication of alkali metal dispensers for production of photocathodes. Commission decided
0075-01 Initial Sodium dichromate 234-190-3
7789-12-0
10588-01-9
Jacobs Douwe Egberts
DE GmbH
Dr. Otto Suwelack Nachf.
GmbH & Co. KG
Européenne de Lyophilisation S.A.
Use of sodium dichromate as a corrosion inhibitor in ammonia absorption deep cooling systems as applied in the industrial production of freeze dried products such as coffee, herbs, spices and comparable products. Commission decided
0074-01 Initial Sodium dichromate 234-190-3
7789-12-0
10588-01-9
TOTAL RAFFINERIE
MITTELDEUTSCHLAND
GMBH
Use of sodium dichromate as a corrosion inhibitor in an ammonia absorption deep cooling system of a methanol synthesis plant. Commission decided
0105-02 Initial Sodium dichromate 234-190-3
7789-12-0
10588-01-9
ILARIO ORMEZZANO - SAI s.r.l. [name of applicant in the original application: Ilario Ormezzano Sai Spa updated due to a notified name change] Use of Sodium Dichromate as a mordant in the dyeing of wool as sliver and/or yarn with dark colours in industrial settings Opinions adopted
0041-02 Initial Sodium dichromate 234-190-3
7789-12-0
10588-01-9
Akzo Nobel Pulp and
Performance Chemicals AB
Use of Sodium dichromate as an additive for suppressing parasitic reactions and oxygen evolution, pH buffering and cathode corrosion protection in the electrolytic manufacture of potassium chlorate. Commission decided
0035-01 Initial Sodium dichromate 234-190-3
7789-12-0
10588-01-9
ARKEMA FRANCE Use of Sodium dichromate as an additive for suppressing parasitic reactions and oxygen evolution, pH buffering and cathode corrosion protection in the electrolytic manufacture of sodium chlorate with or without subsequent production of chlorine dioxide or sodium chlorite Commission decided
0036-01 Initial Sodium dichromate 234-190-3
7789-12-0
10588-01-9
ELECTROQUÍMICA DE
HERNANI, S.A.
Use of Sodium dichromate as an additive for suppressing parasitic reactions and oxygen evolution, pH buffering and cathode corrosion protection in the electrolytic manufacture of sodium chlorate with or without subsequent production of chlorine dioxide or sodium chlorite Commission decided
0039-01 Initial Sodium dichromate 234-190-3
7789-12-0
10588-01-9
HyChem – Química Sustentável, S.A [name of applicant in the original application: "HyChem, Produtos Químicos, SA." updated due to a notified corporate name change] Use of Sodium dichromate as an additive for suppressing parasitic reactions and oxygen evolution, pH buffering and cathode corrosion protection in the electrolytic manufacture of sodium chlorate with or without subsequent production of chlorine dioxide or sodium chlorite Commission decided
0037-01 Initial Sodium dichromate 234-190-3
7789-12-0
10588-01-9
Ercros SA Use of Sodium dichromate as an additive for suppressing parasitic reactions and oxygen evolution, pH buffering and cathode corrosion protection in the electrolytic manufacture of sodium chlorate with or without subsequent production of chlorine dioxide or sodium chlorite Commission decided
0038-01 Initial Sodium dichromate 234-190-3
7789-12-0
10588-01-9
Kemira Chemicals Oy Use of Sodium dichromate as an additive for suppressing parasitic reactions and oxygen evolution, pH buffering and cathode corrosion protection in the electrolytic manufacture of sodium chlorate with or without subsequent production of chlorine dioxide or sodium chlorite Commission decided
0041-01 Initial Sodium dichromate 234-190-3
10588-01-9
7789-12-0
Akzo Nobel Pulp and Performance Chemicals AB
Akzo Nobel Pulp and Performance Chemicals Oy
Akzo Nobel Pulp and Performance Chemicals S.A.S.
Use of Sodium dichromate as an additive for suppressing parasitic reactions and oxygen evolution, pH buffering and cathode corrosion protection in the electrolytic manufacture of sodium chlorate with or without subsequent production of chlorine dioxide. Commission decided
0040-01 Initial Sodium dichromate 234-190-3
10588-01-9
7789-12-0
CAFFARO BRESCIA S.r.l Use of Sodium dichromate as an additive for suppressing parasitic reactions and oxygen evolution, pH buffering and cathode corrosion protection in the electrolytic manufacture of sodium chlorite Commission decided
0137-01 Initial Sodium dichromate 234-190-3
10588-01-9
7789-12-0
SOCIETA' CHIMICA BUSSI S.P.A. Use of sodium dichromate as an additive for suppressing parasitic reactions and oxygen evolution, pH buffering and cathode corrosion protection in the electrolytic manufacturing of sodium chlorite. Commission decided
0236-01 Initial Sodium dichromate 234-190-3
7789-12-0
10588-01-9
Robur S.p.A Use of sodium dichromate as an anticorrosion agent of the carbon steel in sealed circuit of gas absorption appliances up to 1.05% w/w (corresponding to 0.42% w/w as Cr VI) in the refrigerant solution Opinion development
0042-01 Initial Sodium dichromate 234-190-3
7789-12-0
10588-01-9
ARLANXEO Netherlands B.V. [application transferred from original Applicant: Lanxess Elastomers B.V. due to a notified legal entity change] Use of sodium dichromate as corrosion inhibitor in ammonia absorption deep cooling systems Commission decided
0124-01 Initial Sodium dichromate 234-190-3 10588-01-9 H&R Ölwerke Schindler GmbH;
H&R Chemisch-Pharmazeutische Spezialitäten GmbH
Use of sodium dichromate as corrosion inhibitor in ammonia absorption deep cooling systems, applied for the dewaxing and deoiling process steps of petroleum raffinate. Commission decided
0113-01 Initial Sodium dichromate 234-190-3
7789-12-0
10588-01-9
Gruppo Colle.S.r.l. Use of Sodium dichromate as mordant in wool dyeing Commission decided
0222-01 Review report Sodium dichromate 234-190-3
7789-12-0
10588-01-9
Gruppo Colle.S.r.l. Use of Sodium dichromate as mordant in wool dyeing with dark colours. Opinions adopted



Tagged as:

(click the tag to search for relevant content)

EU Privacy Disclaimer

This website uses cookies to ensure you get the best experience on our websites.