A.I.S.E. - Use map, March 2022Assessment of worker:
Percentage of substance in mixture: The risk assessor using A.I.S.E SWEDs should indicate the maximum concentration for the relevant substance that can be used safely considering the conditions of use indicated in this SWED. In the Chesar file prepared by A.I.S.E. the default value for this field is set at 100%, unless manually modified by the risk assessor.
Use of eye protection: Suitable eye protection might be recommended in the SDS by the formulator depending on the product.A.I.S.E.IUC5-8da076c6-3275-4851-a726-2586b783a7e82017-06-09T09:14:582017-11-22T15:45:52ACTIVEOctober 2017Consumer uses; Polishes and wax belnds; Non- spray applicationThis covers the use of non- spray polishes, cream and wax products for items such as furniture, floors, and shoes.PC_31AISE_SCED_PC31_6_a_1www.aise.eu/reachn.aSOLIDS_LIQUIDSTRA_CONSUMER_EXPOSURE_VIA_DERMAL_ROUTEfalsefalseTRA_CONSUMER_EXPOSURE_VIA_DERMAL_ROUTE_YESTRA_CONSUMER_DERMAL_TRANSFER_FACTORDefaultfalsefalse1.0TRA_CONSUMER_BODY_PARTY_DERMALThis is the RIVM ConsExpo value for floor, furniture and shoe care products (RIVM Cleaning Products Fact Sheet)falsetrueINSIDE_HANDS_IDTRA_CONSUMER_EXPOSURE_VIA_INHALATION_ROUTEfalsefalseTRA_CONSUMER_EXPOSURE_VIA_INHALATION_ROUTE_YESTRA_CONSUMER_AMOUNT_OF_PRODUCT_USED_PER_APPLICATIONUnchanged from ECETOC TRA default value, which is based on furniture polish (RIVM Cleaning Products Fact Sheet).
(n.b. for shoe cream, the RIVM Cleaning Products Fact Sheet cites 10g/event).falsetrue550.0TRA_CONSUMER_EXPOSURE_TIMEUnchanged from ECETOC TRA default value.falsetrue4.0TRA_CONSUMER_INHALATION_FACTORDefaultfalsefalse1.0TRA_CONSUMER_SPRAYfalsetrueSPRAY-NOTRA_CONSUMER_PLACE_OF_USEfalsefalseTRA_CONSUMER_PLACE_OF_USE_INDOORTRA_CONSUMER_EXPOSURE_VIA_ORAL_ROUTEIntended use of polishes and wax blends products does not result in oral exposure.falsetrueTRA_CONSUMER_EXPOSURE_VIA_ORAL_ROUTE_NOTRA_CONSUMER_ADULT_CHILD_ASSUMEDfalsefalseTRA_CONSUMER_ADULT_ASSUMEDC_PERCENTAGE_OF_SUBSTANCE_IN_MIXTUREDefault generic maximum concentration of any ingredient (substance) in a polishes and wax blends product. Source: www.cleanright.eu.
This is a default generic value to be used only in absence of specific substance and product datafalsetrue50.0TRA_CONSUMER_FREQUENCY_YEAR24 days/year (number obtained by simple multiplication of the most conservative frequency value available)
Value represents shoe cream and is the highest frequency reported for non-spray floor, furniture and shoe care products (RIVM Cleaning Products Fact Sheet). Shoe creams are used twice a month.
RIVM report 320104003/2006 - Cleaning Products Fact Sheet http://rivm.openrepository.com/rivm/bitstream/10029/7306/1/320104003.pdffalsetrueTRA_CONSUMER_FREQUENCY_YEAR_INFREQUENTTRA_CONSUMER_FREQUENCY_OF_USEValue represents shoe cream and is the highest frequency reported for non-spray floor, furniture and shoe care products (RIVM Cleaning Products Fact Sheet). Shoe creams are used twice a month.
RIVM report 320104003/2006 - Cleaning Products Fact Sheet http://rivm.openrepository.com/rivm/bitstream/10029/7306/1/320104003.pdffalsetrue1.0October 2017A.I.S.E.IUC5-8da076c6-3275-4851-a726-2586b783a7e82017-05-31T10:03:312017-11-22T15:45:41ACTIVEOctober 2017Consumer uses; laundry productsThis covers use of regular, compact, hand wash and automatic wash laundry products.PC_35AISE_SCED_PC35_1_a_1www.aise.eu/reachn.aSOLIDS_LIQUIDSTRA_CONSUMER_EXPOSURE_VIA_DERMAL_ROUTEfalsefalseTRA_CONSUMER_EXPOSURE_VIA_DERMAL_ROUTE_YESTRA_CONSUMER_DERMAL_TRANSFER_FACTORDefaultfalsefalse1.0TRA_CONSUMER_BODY_PARTY_DERMALUnchanged from ECETOC TRA default valuefalsetrueHANDS_IDTRA_CONSUMER_EXPOSURE_VIA_INHALATION_ROUTEInhalation exposure is expected to be minimal when compared to dermal exposure estimated by ECETOC TRA (given the exaggerated assumptions used).
Supporting evidence for this is provided in Chapter 6 of the A.I.S.E. SCEDs supporting explanation document.
Only in the case of Liquid laundry detergent and for substances having a vapour pressure >10 Pa, the estimation of exposure need to be done with a higher tier tool. The SCED fact sheet provides parameters for running this higher tier tool assessment.falsetrueTRA_CONSUMER_EXPOSURE_VIA_INHALATION_ROUTE_NOTRA_CONSUMER_EXPOSURE_VIA_ORAL_ROUTEIntended use of laundry products does not result in oral exposure.falsetrueTRA_CONSUMER_EXPOSURE_VIA_ORAL_ROUTE_NOTRA_CONSUMER_ADULT_CHILD_ASSUMEDfalsefalseTRA_CONSUMER_ADULT_ASSUMEDC_PERCENTAGE_OF_SUBSTANCE_IN_MIXTUREDefault generic maximum concentration of any ingredient (substance) in
a laundry product. Source: www.cleanright.eu.
This is a default generic value to be used only in absence of specific substance and product datafalsetrue30.0TRA_CONSUMER_FREQUENCY_YEAR235 days/year. Number obtained by simple multiplication of the most conservative frequency value availablefalsefalseTRA_CONSUMER_FREQUENCY_YEAR_FREQUENTTRA_CONSUMER_FREQUENCY_OF_USEA.I.S.E. / HERA H&P reports (1) an average value of 4.5 events per week. A.I.S.E. pan-European consumer survey from 2014, give an average value of 3.1 events per week (2).
The default value of 1 event per day used in the ECETOC TRA is thus conservative and used in this SCED.
1 HERA habits and practices – Appendix F http://www.heraproject.com/files/HERA%20TGD%20February%202005.pdf
2 https://www.aise.eu/documents/document/20171026152706-consumershabitssurvey_final_2015-def2_x_web.pdffalsetrue1.0October 2017A.I.S.E.IUC5-8da076c6-3275-4851-a726-2586b783a7e82017-06-09T08:50:502017-11-22T15:45:31ACTIVEOctober 2017Consumer uses; Fabric conditionersThis covers use of regular and compact fabric conditioners productsPC_35AISE_SCED_PC35_2_a_1www.aise.eu/reachn.aLIQUIDSTRA_CONSUMER_EXPOSURE_VIA_DERMAL_ROUTEfalsefalseTRA_CONSUMER_EXPOSURE_VIA_DERMAL_ROUTE_YESTRA_CONSUMER_DERMAL_TRANSFER_FACTORDefaultfalsefalse1.0TRA_CONSUMER_BODY_PARTY_DERMALfalsetrueHANDS_IDTRA_CONSUMER_EXPOSURE_VIA_INHALATION_ROUTEInhalation exposure is expected to be minimal when compared to dermal exposure estimated by ECETOC TRA (given the exaggerated assumptions used.)
Supporting evidence for this is provided in Chapter 6 of the A.I.S.E. SCEDs supporting explanation document.
Only in the case of Liquid laundry detergent and for substances having a vapour pressure >10 Pa, the estimation of exposure need to be done with a higher tier tool. The SCED factsheet provides parameters for running this higher tier tool assessment.falsetrueTRA_CONSUMER_EXPOSURE_VIA_INHALATION_ROUTE_NOTRA_CONSUMER_EXPOSURE_VIA_ORAL_ROUTEIntended use of fabric conditioner does not result in oral exposure.falsetrueTRA_CONSUMER_EXPOSURE_VIA_ORAL_ROUTE_NOTRA_CONSUMER_ADULT_CHILD_ASSUMEDfalsefalseTRA_CONSUMER_ADULT_ASSUMEDC_PERCENTAGE_OF_SUBSTANCE_IN_MIXTUREDefault generic maximum concentration of any ingredient (substance) in a fabric conditioner. Source: www.cleanright.eu.
This is a default generic value to be used only in absence of specific substance and product data.falsetrue15.0TRA_CONSUMER_FREQUENCY_YEAR210 days/year
Number obtained by simple multiplication of the most conservative frequency value availablefalsefalseTRA_CONSUMER_FREQUENCY_YEAR_FREQUENTTRA_CONSUMER_FREQUENCY_OF_USEA.I.S.E. / HERA H&P reports an average value of 4 events per week.
A.I.S.E. pan-European consumer survey from 2014, give an average value of 3.1 events per week.
The default value of 1 event per day used in the ECETOC TRA is thus conservative and used in this SCED.
A.I.S.E. habits and practices tables available under https://www.aise.eu/library/publications.aspx
HERA habits and practices – Appendix F http://www.heraproject.com/files/HERA%20TGD%20February%202005.pdf.falsetrue1.0October 2017A.I.S.E.IUC5-8da076c6-3275-4851-a726-2586b783a7e82017-06-09T08:54:132017-11-22T15:45:57ACTIVEOctober 2017Consumer uses; Surface Cleaners; Non-spray applicationThis covers use of non- spray surface cleaning products such as liquid all-purpose cleaners, toilet cleaners, floor cleaners.PC_35AISE_SCED_PC35_3_a_1www.aise.eu/reachn.aSOLIDS_LIQUIDSTRA_CONSUMER_EXPOSURE_VIA_DERMAL_ROUTEfalsefalseTRA_CONSUMER_EXPOSURE_VIA_DERMAL_ROUTE_YESTRA_CONSUMER_DERMAL_TRANSFER_FACTORDefaultfalsefalse1.0TRA_CONSUMER_BODY_PARTY_DERMALUnchanged from ECETOC TRA default valuefalsetrueHANDS_IDTRA_CONSUMER_EXPOSURE_VIA_INHALATION_ROUTEfalsefalseTRA_CONSUMER_EXPOSURE_VIA_INHALATION_ROUTE_YESTRA_CONSUMER_AMOUNT_OF_PRODUCT_USED_PER_APPLICATIONBased on A.I.S.E./HERA H&P most conservative value for this category.falsetrue110.0TRA_CONSUMER_EXPOSURE_TIMEBased on A.I.S.E./HERA H&P most conservative value for this category.
Unchanged from ECETOC TRA default valuefalsetrue0.3TRA_CONSUMER_INHALATION_FACTORDefaultfalsefalse1.0TRA_CONSUMER_SPRAYfalsetrueSPRAY-NOTRA_CONSUMER_PLACE_OF_USEfalsefalseTRA_CONSUMER_PLACE_OF_USE_INDOORTRA_CONSUMER_EXPOSURE_VIA_ORAL_ROUTEIntended use of surface cleaner does not result in oral exposure.falsetrueTRA_CONSUMER_EXPOSURE_VIA_ORAL_ROUTE_NOTRA_CONSUMER_ADULT_CHILD_ASSUMEDfalsefalseTRA_CONSUMER_ADULT_ASSUMEDC_PERCENTAGE_OF_SUBSTANCE_IN_MIXTUREDefault generic maximum concentration of any ingredient (substance) in a surface cleaner. Source: www.cleanright.eu.
This is a default generic value to be used only in absence of specific substance and product data.falsetrue10.0TRA_CONSUMER_FREQUENCY_YEAR105 days/year
number obtained by simple multiplication of the most conservative frequency value availablefalsefalseTRA_CONSUMER_FREQUENCY_YEAR_FREQUENTTRA_CONSUMER_FREQUENCY_OF_USEA.I.S.E. / HERA H&P reports an average value of 2 events per week.
A.I.S.E. habits and practices tables available under http://www.aise.eu/reach/?page=exposureass_sub3
HERA habits and practices – Appendix F http://www.heraproject.com/files/HERA%20TGD%20February%202005.pdf
The default value of 1 event per day used in the ECETOC TRA is thus conservative and used in this SCED.falsetrue1.0October 2017A.I.S.E.IUC5-8da076c6-3275-4851-a726-2586b783a7e82017-06-09T09:36:112017-11-22T15:45:19ACTIVEOctober 2017Consumer uses; Air care products; AerosolThis covers the use of air freshener aerosols such as aqueous, non-aqueous, and concentrated mini-aerosols.PC_3AISE_SCED_PC3_7_b_1www.aise.eu/reachn.aLIQUIDSTRA_CONSUMER_EXPOSURE_VIA_DERMAL_ROUTEUnchanged from ECETOC TRA default value
Exposure to skin is unlikely under normal conditions of use.falsetrueTRA_CONSUMER_EXPOSURE_VIA_DERMAL_ROUTE_NO_CONTACTTRA_CONSUMER_EXPOSURE_VIA_INHALATION_ROUTEfalsefalseTRA_CONSUMER_EXPOSURE_VIA_INHALATION_ROUTE_YESTRA_CONSUMER_AMOUNT_OF_PRODUCT_USED_PER_APPLICATIONUnchanged from ECETOC TRA default value.falsetrue10.0TRA_CONSUMER_EXPOSURE_TIMEUnchanged from ECETOC TRA default valuefalsetrue0.25TRA_CONSUMER_INHALATION_FACTORDefaultfalsefalse1.0TRA_CONSUMER_SPRAYfalsefalseSPRAY-YESTRA_CONSUMER_PLACE_OF_USEfalsefalseTRA_CONSUMER_PLACE_OF_USE_INDOORTRA_CONSUMER_EXPOSURE_VIA_ORAL_ROUTEIntended use of air care products does not result in oral exposure.falsetrueTRA_CONSUMER_EXPOSURE_VIA_ORAL_ROUTE_NOTRA_CONSUMER_ADULT_CHILD_ASSUMEDfalsefalseTRA_CONSUMER_ADULT_ASSUMEDC_PERCENTAGE_OF_SUBSTANCE_IN_MIXTUREDefault generic maximum concentration of any ingredient (substance) in an air care product. Source: www.cleanright.eu.
This is a default generic value to be used only in absence of specific substance and product data.falsetrue50.0TRA_CONSUMER_FREQUENCY_YEAR365falsefalseTRA_CONSUMER_FREQUENCY_YEAR_FREQUENTTRA_CONSUMER_FREQUENCY_OF_USEIPSOS data reported in Torfs et al 200815 and ‘Typical’ value reported in A.I.S.E. H&P table (rather than TRA default of 4 events per day).
Source: Torfs R., De Brouwere K., Spruyt M., Goelen E., Nickmilder M., Bernard A. (2008), Exposure and Risk Assessment of air Fresheners, VITO report 2008/IMS/R/222falsetrue2.0October 2017A.I.S.E.IUC5-8da076c6-3275-4851-a726-2586b783a7e82017-06-09T09:29:072017-11-22T15:45:13ACTIVEOctober 2017Consumer uses; Polishes and wax blends; Spray applicationThis covers the use of spray polishes and waxes for items such as furniture, floors, and shoes.PC_31AISE_SCED_PC31_6_b_1www.aise.eu/reachn.aLIQUIDSTRA_CONSUMER_EXPOSURE_VIA_DERMAL_ROUTEfalsefalseTRA_CONSUMER_EXPOSURE_VIA_DERMAL_ROUTE_YESTRA_CONSUMER_DERMAL_TRANSFER_FACTORDefaultfalsefalse1.0TRA_CONSUMER_BODY_PARTY_DERMALThis is the RIVM ConsExpo value for floor, furniture and shoe care products (RIVM Cleaning Products Fact Sheet).falsetrueINSIDE_HANDS_IDTRA_CONSUMER_EXPOSURE_VIA_INHALATION_ROUTEfalsefalseTRA_CONSUMER_EXPOSURE_VIA_INHALATION_ROUTE_YESTRA_CONSUMER_AMOUNT_OF_PRODUCT_USED_PER_APPLICATIONUnchanged from ECETOC TRA default value, which is based on leather furniture spray (RIVM Cleaning Products Fact Sheet).
(n.b. for shoe cream, the RIVM Cleaning Products Fact Sheet cites 36g/event).falsetrue135.0TRA_CONSUMER_EXPOSURE_TIMEBased on the A.I.S.E. H&Pfalsetrue1.0TRA_CONSUMER_INHALATION_FACTORDefaultfalsefalse1.0TRA_CONSUMER_SPRAYfalsefalseSPRAY-YESTRA_CONSUMER_PLACE_OF_USEfalsefalseTRA_CONSUMER_PLACE_OF_USE_INDOORTRA_CONSUMER_EXPOSURE_VIA_ORAL_ROUTEIntended use of polishes and wax blends products does not result in oral exposure.falsetrueTRA_CONSUMER_EXPOSURE_VIA_ORAL_ROUTE_NOTRA_CONSUMER_ADULT_CHILD_ASSUMEDfalsefalseTRA_CONSUMER_ADULT_ASSUMEDC_PERCENTAGE_OF_SUBSTANCE_IN_MIXTUREDefault generic maximum concentration of any ingredient (substance) in a maintenance product. Source: www.cleanright.eu.
This is a default generic value to be used only in absence of specific substance and product data.falsetrue50.0TRA_CONSUMER_FREQUENCY_YEAR8
Value represents shoe spray and is the highest frequency reported for spray floor, furniture and shoe care products (RIVM Cleaning Products Fact Sheet13). Shoe sprays are used 8 times a year(i.e. less than once a month)
RIVM report 320104003/2006 - Cleaning Products Fact Sheet http://rivm.openrepository.com/rivm/bitstream/10029/7306/1/320104003.pdffalsetrueTRA_CONSUMER_FREQUENCY_YEAR_INFREQUENTTRA_CONSUMER_FREQUENCY_OF_USEfalsetrue1.0October 2017A.I.S.E.IUC5-8da076c6-3275-4851-a726-2586b783a7e82017-06-09T09:00:122017-11-22T15:45:46ACTIVEOctober 2017Consumer uses; Machine dishwashing productsThis covers the use of automatic dishwashing products.PC_35AISE_SCED_PC35_4_a_1www.aise.eu/reachn.aSOLIDS_LIQUIDSTRA_CONSUMER_EXPOSURE_VIA_DERMAL_ROUTEfalsefalseTRA_CONSUMER_EXPOSURE_VIA_DERMAL_ROUTE_YESTRA_CONSUMER_DERMAL_TRANSFER_FACTORDefaultfalsefalse1.0TRA_CONSUMER_BODY_PARTY_DERMALECETOC TRA surface area for inside of 2 hands/palm of 2 hands/ One hand = 428 cm2
This is more conservative than the ConsExpo surface area cited for dish wash rinse aids (215 cm2, one palm).falsetrueINSIDE_HANDS_IDTRA_CONSUMER_EXPOSURE_VIA_INHALATION_ROUTEInhalation exposure is expected to be minimal when compared to dermal exposure estimated by ECETOC TRA (given the exaggerated assumptions used.
Supporting evidence for this is provided in Chapter 6 of the A.I.S.E. SCEDs supporting explanation document.falsetrueTRA_CONSUMER_EXPOSURE_VIA_INHALATION_ROUTE_NOTRA_CONSUMER_EXPOSURE_VIA_ORAL_ROUTEIntended use of automatic dishwashing products does not result in oral exposure.
Oral exposure would happen only by residue deposited on dishes and not by direct ingestion of the product. Exposure from this route (via residue) is negligible when compared to the dermal exposure estimation as calculated using ECETOC TRA and has been documented in HERA risk assessment reports. If desired calculation can be done with higher tier tool like REACT.falsetrueTRA_CONSUMER_EXPOSURE_VIA_ORAL_ROUTE_NOTRA_CONSUMER_ADULT_CHILD_ASSUMEDfalsefalseTRA_CONSUMER_ADULT_ASSUMEDC_PERCENTAGE_OF_SUBSTANCE_IN_MIXTUREDefault generic maximum concentration of any ingredient (substance) in an automatic dishwashing product. Source: www.cleanright.eu.
This is a default generic value to be used only in absence of specific substance and product datafalsetrue60.0TRA_CONSUMER_FREQUENCY_YEAR261 days/year
Number obtained by simple multiplication of the most conservative frequency value availablefalsefalseTRA_CONSUMER_FREQUENCY_YEAR_FREQUENTTRA_CONSUMER_FREQUENCY_OF_USEA.I.S.E. / HERA H&P reports an average value of 5 events per week.
A.I.S.E. habits and practices tables available under http://www.aise.eu/reach/?page=exposureass_sub3
HERA habits and practices – Appendix F http://www.heraproject.com/files/HERA%20TGD%20February%202005.pdf
A.I.S.E. pan-European consumer survey from 2009 and 2011, give an average value of 4.5 events per week.
http://www.aise.eu/documents/document/20140211164810-final_aise_habits_survey_2014update.pdf
The default value of 1 event per day used in the ECETOC TRA is thus conservative and used in this SCED.falsetrue1.0October 2017A.I.S.E.IUC5-8da076c6-3275-4851-a726-2586b783a7e82017-06-09T08:56:352017-11-22T15:46:03ACTIVEOctober 2017Consumer uses; Surface Cleaners; Spray applicationThis covers the use of trigger sprays used as general hard surface cleanersPC_35AISE_SCED_PC35_3_b_1www.aise.eu/reachn.aLIQUIDSTRA_CONSUMER_EXPOSURE_VIA_DERMAL_ROUTEfalsefalseTRA_CONSUMER_EXPOSURE_VIA_DERMAL_ROUTE_YESTRA_CONSUMER_DERMAL_TRANSFER_FACTORDefaultfalsefalse1.0TRA_CONSUMER_BODY_PARTY_DERMALUnchanged from ECETOC TRA default valuefalsetrueHANDS_IDTRA_CONSUMER_EXPOSURE_VIA_INHALATION_ROUTEfalsefalseTRA_CONSUMER_EXPOSURE_VIA_INHALATION_ROUTE_YESTRA_CONSUMER_AMOUNT_OF_PRODUCT_USED_PER_APPLICATIONA.I.S.E./HERA H&Pfalsetrue30.0TRA_CONSUMER_EXPOSURE_TIMEA.I.S.E./HERA H&Pfalsetrue0.2TRA_CONSUMER_INHALATION_FACTORDefaultfalsefalse1.0TRA_CONSUMER_SPRAYfalsefalseSPRAY-YESTRA_CONSUMER_PLACE_OF_USEfalsefalseTRA_CONSUMER_PLACE_OF_USE_INDOORTRA_CONSUMER_EXPOSURE_VIA_ORAL_ROUTEIntended use of spray surface cleaner does not result in oral exposure.falsetrueTRA_CONSUMER_EXPOSURE_VIA_ORAL_ROUTE_NOTRA_CONSUMER_ADULT_CHILD_ASSUMEDfalsefalseTRA_CONSUMER_ADULT_ASSUMEDC_PERCENTAGE_OF_SUBSTANCE_IN_MIXTUREDefault generic maximum concentration of any ingredient (substance) in a spray surface cleaner. Source: www.cleanright.eu.
This is a default generic value to be used only in absence of specific substance and product data.falsetrue10.0TRA_CONSUMER_FREQUENCY_YEAR105 days/year
number obtained by simple multiplication of the most conservative frequency value availablefalsefalseTRA_CONSUMER_FREQUENCY_YEAR_FREQUENTTRA_CONSUMER_FREQUENCY_OF_USEA.I.S.E. / HERA H&P reports an average value of 2 events per week.
A.I.S.E. habits and practices tables available under http://www.aise.eu/reach/?page=exposureass_sub3
HERA habits and practices – Appendix F http://www.heraproject.com/files/HERA%20TGD%20February%202005.pdf
The default value of 1 event per day used in the ECETOC TRA is thus conservative and used in this SCED.falsetrue1.0October 2017A.I.S.E.IUC5-8da076c6-3275-4851-a726-2586b783a7e82017-06-09T09:09:522017-11-22T15:45:36ACTIVEOctober 2017Consumer uses; Hand dishwashing productsThis covers the use of hand dishwashing products.PC_35AISE_SCED_PC35_5_a_1www.aise.eu/reachn.aLIQUIDSTRA_CONSUMER_EXPOSURE_VIA_DERMAL_ROUTEfalsefalseTRA_CONSUMER_EXPOSURE_VIA_DERMAL_ROUTE_YESTRA_CONSUMER_DERMAL_TRANSFER_FACTORDefaultfalsefalse1.0TRA_CONSUMER_BODY_PARTY_DERMALUnchanged from ECETOC TRA default valuefalsetrueHANDS_IDTRA_CONSUMER_EXPOSURE_VIA_INHALATION_ROUTEInhalation exposure is expected to be minimal when compared to dermal exposure estimated by ECETOC TRA (given the exaggerated assumptions used.
Supporting evidence for this is provided in chapter 6 of the A.I.S.E. SCEDs supporting explanation document.falsetrueTRA_CONSUMER_EXPOSURE_VIA_INHALATION_ROUTE_NOTRA_CONSUMER_EXPOSURE_VIA_ORAL_ROUTEIntended use of hand dishwashing products does not result in oral exposure.
Oral exposure would happen only by residue deposited on dishes and not by direct ingestion of the product. Exposure from this route (via residue) is negligible when compared to the dermal exposure estimation as calculated using ECETOC TRA and has been documented in HERA risk assessment reports. If desired calculation can be done with higher tier tool like REACT.falsetrueTRA_CONSUMER_EXPOSURE_VIA_ORAL_ROUTE_NOTRA_CONSUMER_ADULT_CHILD_ASSUMEDfalsefalseTRA_CONSUMER_ADULT_ASSUMEDC_PERCENTAGE_OF_SUBSTANCE_IN_MIXTUREDefault generic maximum concentration of any ingredient (substance) in a hand dishwashing product. Source: www.cleanright.eu.
This is a default generic value to be used only in absence of specific substance and product data.falsetrue30.0TRA_CONSUMER_FREQUENCY_YEAR365falsefalseTRA_CONSUMER_FREQUENCY_YEAR_FREQUENTTRA_CONSUMER_FREQUENCY_OF_USEA.I.S.E. / HERA H&P reports an average value of 14 events per week.
A.I.S.E. habits and practices tables available under http://www.aise.eu/reach/?page=exposureass_sub3
HERA habits and practices – Appendix F http://www.heraproject.com/files/HERA%20TGD%20February%202005.pdf
The default value of 2 event/day used in the ECETOC TRA is thus realistic and used in this SCED.falsetrue2.0October 2017A.I.S.E.IUC5-8da076c6-3275-4851-a726-2586b783a7e82017-06-09T09:33:582017-11-22T15:45:26ACTIVEOctober 2017Consumer uses; Air care products; Non aerosolThis covers the use of non-aerosol air fresheners such as plug-ins, perfume in/on solid substrates (e.g. gels), candles, and diffusers (e.g. heated).PC_3AISE_SCED_PC3_7_a_1www.aise.eu/reachn.aSOLIDS_LIQUIDSTRA_CONSUMER_EXPOSURE_VIA_DERMAL_ROUTEfalsefalseTRA_CONSUMER_EXPOSURE_VIA_DERMAL_ROUTE_YESTRA_CONSUMER_DERMAL_TRANSFER_FACTORfalsefalse1.0TRA_CONSUMER_BODY_PARTY_DERMALDermal exposure could occur during product assembly but is unlikely to occur. It is estimated that at worst, two finger tips would be exposed (rather than the ECETOC TRA default of 5 finger tips).falsetrueTWO_FINGERTIPS_IDTRA_CONSUMER_EXPOSURE_VIA_INHALATION_ROUTEfalsefalseTRA_CONSUMER_EXPOSURE_VIA_INHALATION_ROUTE_YESTRA_CONSUMER_AMOUNT_OF_PRODUCT_USED_PER_APPLICATIONA.I.S.E. H&P14 data for non-aerosol air fresheners cites the following ‘typical’ discharge rates:
Solid substrate (Gel): 2.9 E-5 g/s
Heated & electrical diffusers: 1.2 E-5 g/s
Assuming each product is run for 24 hours (i.e. 1 day), this equates to:
Solid substrate (Gel): 2.5 g/day
Heated & electrical diffusers: 1.04 g/day
The higher value is used.
A.I.S.E. habits and practices tables available under http://www.aise.eu/reach/?page=exposureass_sub3falsetrue2.5TRA_CONSUMER_EXPOSURE_TIMEUnchanged from ECETOC TRA default valuefalsetrue8.0TRA_CONSUMER_INHALATION_FACTORDefaultfalsefalse1.0TRA_CONSUMER_SPRAYfalsetrueSPRAY-NOTRA_CONSUMER_PLACE_OF_USEfalsefalseTRA_CONSUMER_PLACE_OF_USE_INDOORTRA_CONSUMER_EXPOSURE_VIA_ORAL_ROUTEIntended use of air care products does not result in oral exposure.falsetrueTRA_CONSUMER_EXPOSURE_VIA_ORAL_ROUTE_NOTRA_CONSUMER_ADULT_CHILD_ASSUMEDfalsefalseTRA_CONSUMER_ADULT_ASSUMEDC_PERCENTAGE_OF_SUBSTANCE_IN_MIXTUREDefault generic maximum concentration of any ingredient (substance) in an air care product. Source: www.cleanright.eu.
This is a default generic value to be used only in absence of specific substance and product data.falsetrue10.0TRA_CONSUMER_FREQUENCY_YEAR365falsefalseTRA_CONSUMER_FREQUENCY_YEAR_FREQUENTTRA_CONSUMER_FREQUENCY_OF_USEUnchanged from ECETOC TRA default valuefalsetrue1.0October 2017A.I.S.E.IUC5-8da076c6-3275-4851-a726-2586b783a7e82021-11-09T19:59:372021-11-30T13:27:03ACTIVENov 2021AISE 8a.1c.v3Wide Spread Use in Aerosol products for cleaning and maintenance products (Volatile substances incl. propellants)Substance types / functions / properties included or excluded: Covers the use of volatile substances in cleaning and maintenance aerosol products. Volatiles which evaporate to a significant extent upon curing of the adhesives. Volatile ingredients are defined by a boiling point threshold of <250°C. cf. background document for further definition.
Additional specification of product types covered: covers professional and consumer aerosol applicationsSpraying of volatile ingredients contained in cleaning and maintenance productshttps://echa.europa.eu/csr-es-roadmap/use-maps/use-maps-libraryfalseCONSUMER_USEINDUSTRIALPC_3PC_35PC_8PC_317.5E-4cf. AISE Background documentcf. AISE Background documentcf. AISE Background documentcf. AISE Background documentcf. AISE Background documentWide Spread Use in Aerosol products for cleaning and maintenance products (Volatile substances incl. propellants)AISE 8a.1c.v3ERC_8a0.0100.00.00.004EUSES_BIOLOGICAL_STPfalsetrueEUSES_BIOLOGICAL_STP-STANDARDWATERWASTE_TREATMENT_CONSIDERATION"Explanation for the CSR" to be reported by each registrant on the specific conditions required for waste treatment:falsetrueWASTE_CONSIDERATION_OTHER_TREATMENTRELEASE_MODULE_REGIONAL_SCALEcf. AISE Background documentfalsefalse4.0ENVIRONMENT_PLACE_OF_USEfalsetrueENVIRONMENT_PLACE_OF_USE_INDOORWATER_CONTACT_DURING_USEfalsetrueWATER_CONTACT_DURING_USE_YES21f4b32b-ab1b-4fdc-9ae4-314b84e94e94falsefalse95babb9e-8ade-44ca-947b-3349a763eee6ec2738fd-8167-49a2-ac0f-87329ad0519efalsetrued8e2a5fc-30da-4bca-92ee-ce1a3400b72514.07.2020A.I.S.E.IUC5-8da076c6-3275-4851-a726-2586b783a7e82022-03-03T20:35:482022-03-03T20:35:48ACTIVEMarch 2022AISE 2.1b.v3Formulation of granular Detergents/ Maintenance Products: Regular & Compact (medium scale 1,000 - 10,000 t product/a)Substance types / functions / properties included or excluded: solid and liquid substances used for the formulation of granular detergents and maintenance products
Additional specification of product types covered: regular powders with apparent density below ca. 0.75kg/L. Compact powders may be extruded (e.g. pearls) or tableted (tabs) detergents reaching densities of ca. 1.4kg/l.Covers the whole process of formulation as it occurs in the manufacturing of granular cleaning and maintenance products. This includes typical process steps, such as storing, mixing, packaging of substances (as part of mixtures) and associated laboratory activities. Granular detergents are obtained by drying liquid slurries. Tablets are made by compressing powder materialhttps://echa.europa.eu/csr-es-roadmap/use-maps/use-maps-libraryfalseFORMULATIONINDUSTRIALPC_35300.0Cf. AISE background documentcf. AISE Background documentcf. AISE Background documentcf. AISE Background documentcf. AISE Background documentFormulation of granular Detergents/ Maintenance Products: Regular & Compact
(medium scale 1,000 - 10,000t product/a)AISE 2.1b.v3ERC_20.10.10.00.0RELEASE_MODULE_DAILY_USE_AT_SITEThe daily max amount per site (Msafe) is used. The indicative substance use rate (MSPERC) for several ingredient types and guidance for refinement can be found in background information.falsetrueEUSES_DISCHARGE_RATE_OF_STPfalsetrue2000.0EUSES_BIOLOGICAL_STPfalsetrueEUSES_BIOLOGICAL_STP-STANDARDWATERAPPLICATION_OF_THE_STPfalsefalseAPPLICATION_OF_THE_STP-YESWASTE_TREATMENT_CONSIDERATION"Explanation for the CSR" to be reported by each registrant on the specific conditions required for waste treatment:falsetrueWASTE_CONSIDERATION_OTHER_TREATMENTENVIRONMENT_PLACE_OF_USEfalsetrueENVIRONMENT_PLACE_OF_USE_INDOORWATER_CONTACT_DURING_USEfalsetrueWATER_CONTACT_DURING_USE_YES18f21585-d45e-4d7d-9be6-d6c3612484ccReduced number of transfer and cleaning operations through e.g. manufacturing of different products from one premix (masterbatch), to which certain ingredients are added to yield the final products and/or Dedicated storage tanks for raw materials, premixes and final products and/or Residues of granular detergents recovered in cleaning steps at packaging or transfer lines are recycled into the slurriesfalsetruee5bf56dd-7306-4865-8d63-f1c642de0263c531adf9-d9ca-41e9-a5b8-83525d0158c7falsetrue2093dcfc-05f9-4683-932e-460d146b1a638bacf2ff-f392-4079-95fc-2ccf0f496374Dry cleaning of equipment, use of Central or Peripheral Vacuum Cleaning and/or cleaning involving so-called pigs in sub-processes involving liquid slurries and/or re-Use of process grey water for cleaningfalsetrue02326a9e-b0b6-4cb0-a545-3f509cdd6fd9ec2738fd-8167-49a2-ac0f-87329ad0519efalsetrue3dbe75c1-81f1-4d9b-8754-a2378661dc5420.08.2021A.I.S.E.IUC5-8da076c6-3275-4851-a726-2586b783a7e82022-03-03T20:39:152022-03-03T20:39:15ACTIVEMarch 2022AISE 2.1h.v3Formulation of liquid Detergents/ Maintenance Products: Low Viscosity (medium scale 1,000 - 10,000t product/a)Substance types / functions / properties included or excluded: solid and liquid substances used for the formulation of liquid detergents and maintenance products
Additional specification of product types covered: Low viscosity products include the following: floor cleaner, all purpose cleaner, bathroom cleaner, kitchen cleaner, window cleaner, liquid WC-rim. Typically, the viscosity of these products is not specified and not adjusted.Covers the whole process of formulating water-borne mixtures for liquid cleaning and maintenance products. This includes typical process steps, such as storing, mixing, packaging of substances (as part of mixtures) and associated laboratory activities. Routine equipment cleaning and maintenance is also included and leads to the highest contribution to environmental release.https://echa.europa.eu/csr-es-roadmap/use-maps/use-maps-libraryfalseFORMULATIONINDUSTRIALPC_35300.0cf. AISE Background documentcf. AISE Background documentcf. AISE Background documentcf. AISE Background documentcf. AISE Background documentFormulation of liquid Detergents/ Maintenance Products: Low Viscosity (medium scale 1,000 - 10,000t product/a)AISE 2.1h.v3ERC_20.10.00.00.0RELEASE_MODULE_DAILY_USE_AT_SITEThe daily max amount per site (Msafe) is used. The indicative substance use rate (MSPERC) for several ingredient types and guidance for refinement can be found in background information.falsetrueEUSES_DISCHARGE_RATE_OF_STPfalsetrue2000.0EUSES_BIOLOGICAL_STPfalsetrueEUSES_BIOLOGICAL_STP-STANDARDWATERAPPLICATION_OF_THE_STPfalsefalseAPPLICATION_OF_THE_STP-YESWASTE_TREATMENT_CONSIDERATION"Explanation for the CSR" to be reported by each registrant on the specific conditions required for waste treatment:falsetrueWASTE_CONSIDERATION_OTHER_TREATMENTENVIRONMENT_PLACE_OF_USEfalsetrueENVIRONMENT_PLACE_OF_USE_INDOOR18f21585-d45e-4d7d-9be6-d6c3612484ccReduced number of transfer and cleaning operations through e.g. Dedicated storage tanks for raw materials and final products and/or Recovery of materials through e.g. recycling residues of powder ingredients in cleaning steps at packaging or transfer line into the processfalsetruedeeba449-3aaa-4072-a351-eca062e6b948c531adf9-d9ca-41e9-a5b8-83525d0158c7falsetruef3d0d496-f151-4c1f-a18a-e98e874c626f8bacf2ff-f392-4079-95fc-2ccf0f496374Manual removal of residual products adhering to equipment (e.g. by manual scrubbing, vacuum cleaning, etc.) and/or Use of two-liner systems (i.e. single Use disposable reactor cover that is incinerated after Use as solid waste) and/or Use of adsorption pads to clean spillsfalsetrue56fddd1f-bf93-41cc-bd35-3f1128b9e0cbec2738fd-8167-49a2-ac0f-87329ad0519efalsetrue11d0321b-c37a-46fa-8e52-4c24b680ca45WATER_CONTACT_DURING_USEfalsetrueWATER_CONTACT_DURING_USE_YES20.08.2021A.I.S.E.IUC5-8da076c6-3275-4851-a726-2586b783a7e82022-03-03T20:38:082022-03-03T20:38:08ACTIVEMarch 2022AISE 2.1g.v3Formulation of liquid Detergents/ Maintenance Products: Low Viscosity (large scale >10,000t product/a)Substance types / functions / properties included or excluded: solid and liquid substances used for the formulation of liquid detergents and maintenance products
Additional specification of product types covered: Low viscosity products include the following: floor cleaner, all-purpose cleaner, bathroom cleaner, kitchen cleaner, window cleaner, liquid WC-rim. Typically, the viscosity of these products is not specified and not adjusted.Covers the whole process of formulating water-borne mixtures for liquid cleaning and maintenance products. This includes typical process steps, such as storing, mixing, packaging of substances (as part of mixtures) and associated laboratory activities. Routine equipment cleaning and maintenance is also included and leads to the highest contribution to environmental release.https://echa.europa.eu/csr-es-roadmap/use-maps/use-maps-libraryfalseFORMULATIONINDUSTRIALPC_35300.0cf. AISE Background documentcf. AISE Background documentcf. AISE Background documentcf. AISE Background documentcf. AISE Background documentFormulation of liquid Detergents/ Maintenance Products: Low Viscosity (large scale >10,000t product/a)AISE 2.1g.v3ERC_20.050.00.00.0RELEASE_MODULE_DAILY_USE_AT_SITEThe daily max amount per site (Msafe) is used. The indicative substance use rate (MSPERC) for several ingredient types and guidance for refinement can be found in background documentation.falsetrueEUSES_DISCHARGE_RATE_OF_STPfalsetrue2000.0EUSES_BIOLOGICAL_STPfalsetrueEUSES_BIOLOGICAL_STP-STANDARDWATERAPPLICATION_OF_THE_STPfalsefalseAPPLICATION_OF_THE_STP-YESWASTE_TREATMENT_CONSIDERATION"Explanation for the CSR" to be reported by each registrant on the specific conditions required for waste treatment:falsetrueWASTE_CONSIDERATION_OTHER_TREATMENTENVIRONMENT_PLACE_OF_USEfalsetrueENVIRONMENT_PLACE_OF_USE_INDOORWATER_CONTACT_DURING_USEfalsetrueWATER_CONTACT_DURING_USE_YES18f21585-d45e-4d7d-9be6-d6c3612484ccReduced number of transfer and cleaning operations through e.g. Dedicated storage tanks for raw materials and final products and/or Recovery of materials through e.g. recycling residues of powder ingredients in cleaning steps at packaging or transfer line into the processfalsetruedeeba449-3aaa-4072-a351-eca062e6b948c531adf9-d9ca-41e9-a5b8-83525d0158c7falsetrue73d80ba6-6ebf-426b-8a88-df2841a3e6268bacf2ff-f392-4079-95fc-2ccf0f496374Manual removal of residual products adhering to equipment (e.g. by manual scrubbing, vacuum cleaning, etc.) and/or Use of two-liner systems (i.e. single Use disposable reactor cover that is incinerated after Use as solid waste) and/or Use of adsorption pads to clean spillsfalsetrue56fddd1f-bf93-41cc-bd35-3f1128b9e0cbec2738fd-8167-49a2-ac0f-87329ad0519efalsetrue11d0321b-c37a-46fa-8e52-4c24b680ca4520.08.2021A.I.S.E.IUC5-8da076c6-3275-4851-a726-2586b783a7e82022-03-03T20:40:192022-03-03T20:40:19ACTIVEMarch 2022AISE 2.1i.v3Formulation of liquid Detergents/ Maintenance Products: Low Viscosity (small scale <1,000 t product/a)Substance types / functions / properties included or excluded: solid and liquid substances used for the formulation of liquid detergents and maintenance products
Additional specification of product types covered: Low viscosity products include the following: floor cleaner, all purpose cleaner, bathroom cleaner, kitchen cleaner, window cleaner, liquid WC-rim. Typically, the viscosity of these products is not specified and not adjusted.Covers the whole process of formulating water-borne mixtures for liquid cleaning and maintenance products. This includes typical process steps, such as storing, mixing, packaging of substances (as part of mixtures) and associated laboratory activities. Routine equipment cleaning and maintenance is also included and leads to the highest contribution to environmental release.https://echa.europa.eu/csr-es-roadmap/use-maps/use-maps-libraryfalseFORMULATIONINDUSTRIALPC_35150.0cf. AISE Background documentcf. AISE Background documentcf. AISE Background documentcf. AISE Background documentcf. AISE Background documentFormulation of liquid Detergents/ Maintenance Products: Low Viscosity (small scale <1,000 t product/a)AISE 2.1i.v3ERC_20.20.00.00.0RELEASE_MODULE_DAILY_USE_AT_SITEThe daily max amount per site (Msafe) is used. The indicative substance use rate (MSPERC) for several ingredient types and guidance for refinement can be found in background documentation.falsetrueEUSES_DISCHARGE_RATE_OF_STPfalsetrue2000.0EUSES_BIOLOGICAL_STPfalsetrueEUSES_BIOLOGICAL_STP-STANDARDWATERAPPLICATION_OF_THE_STPfalsefalseAPPLICATION_OF_THE_STP-YESWASTE_TREATMENT_CONSIDERATION"Explanation for the CSR" to be reported by each registrant on the specific conditions required for waste treatment:falsetrueWASTE_CONSIDERATION_OTHER_TREATMENTENVIRONMENT_PLACE_OF_USEfalsetrueENVIRONMENT_PLACE_OF_USE_INDOORWATER_CONTACT_DURING_USEfalsetrueWATER_CONTACT_DURING_USE_YES18f21585-d45e-4d7d-9be6-d6c3612484ccReduced number of transfer and cleaning operations through e.g. Dedicated storage tanks for raw materials and final products and/or Recovery of materials through e.g. recycling residues of powder ingredients in cleaning steps at packaging or transfer line into the processfalsetruedeeba449-3aaa-4072-a351-eca062e6b948c531adf9-d9ca-41e9-a5b8-83525d0158c7falsetruef3d0d496-f151-4c1f-a18a-e98e874c626f8bacf2ff-f392-4079-95fc-2ccf0f496374Manual removal of residual products adhering to equipment (e.g. by manual scrubbing, vacuum cleaning, etc.) and/or Use of two-liner systems (i.e. single Use disposable reactor cover that is incinerated after Use as solid waste) and/or Use of adsorption pads to clean spillsfalsetrue56fddd1f-bf93-41cc-bd35-3f1128b9e0cbec2738fd-8167-49a2-ac0f-87329ad0519efalsetrue11d0321b-c37a-46fa-8e52-4c24b680ca4520.08.2021A.I.S.E.IUC5-8da076c6-3275-4851-a726-2586b783a7e82021-11-09T19:30:022021-11-30T13:24:03ACTIVENov 2021AISE 8a.1a.v3Wide Spread Use in 'Down the Drain' laundry detergents, cleaning and maintenance productsSubstance types / functions / properties included or excluded: Covers the use of solid and liquid substances in laundry detergents, cleaning and maintenance products
Additional specification of product types covered: covers professional and consumer applications such as:
- Regular and compact powders: Regular powders with apparent density below ca. 0.75kg/L. Compact powders may be extruded (e.g.
pearls) or tableted (tabs) detergents reaching densities of ca. 1.4kg/l.
- Low viscosity products: floor cleaner, all purpose cleaner, bathroom cleaner, kitchen cleaner, window cleaner, liquid WC-rim
- High viscosity products include the following: fabric finisher, liquid detergents, liquid detergent gels, detergent paste (hand detergents),
cleaner gels (WC, bathroom, etc.) and hand dishwashSubstance applied in aqueous process solution with negligible volatilizationhttps://echa.europa.eu/csr-es-roadmap/use-maps/use-maps-libraryfalsePROFESSIONAL_WORKER_USEINDUSTRIALPC_3PC_35PC_8PC_317.5E-4cf. AISE Background documentWide Spread Use in 'Down the Drain' laundry detergents, cleaning and maintenance productsAISE 8a.1a.v3ERC_8a100.00.00.00.004EUSES_BIOLOGICAL_STPfalsetrueEUSES_BIOLOGICAL_STP-STANDARDWATERWASTE_TREATMENT_CONSIDERATION"Explanation for the CSR" to be reported by each registrant on the specific conditions required for waste treatment:falsetrueWASTE_CONSIDERATION_OTHER_TREATMENTENVIRONMENT_PLACE_OF_USEfalsetrueENVIRONMENT_PLACE_OF_USE_INDOORRELEASE_MODULE_REGIONAL_SCALEcf. AISE Background documentfalsefalse4.0WATER_CONTACT_DURING_USEfalsetrueWATER_CONTACT_DURING_USE_YES025b8ced-ea23-4300-928f-82348f092cc4falsetrue8a9cc976-32a6-4332-95a6-5a9ce7abccf989da0a94-43b2-4b7d-a55a-1e000fcfd7a3falsetrue09373d1b-22be-4885-bd15-79aaed3b8a6eec2738fd-8167-49a2-ac0f-87329ad0519efalsetrued8e2a5fc-30da-4bca-92ee-ce1a3400b72514.07.2020A.I.S.E.IUC5-8da076c6-3275-4851-a726-2586b783a7e82021-11-09T19:30:382021-11-30T13:23:17ACTIVENov 2021AISE 8a.1a.v3Wide Spread Use in 'Down the Drain' laundry detergents, cleaning and maintenance productsSubstance types / functions / properties included or excluded: Covers the use of solid and liquid substances in laundry detergents, cleaning and maintenance products
Additional specification of product types covered: covers professional and consumer applications such as:
- Regular and compact powders: Regular powders with apparent density below ca. 0.75kg/L. Compact powders may be extruded (e.g.
pearls) or tableted (tabs) detergents reaching densities of ca. 1.4kg/l.
- Low viscosity products: floor cleaner, all purpose cleaner, bathroom cleaner, kitchen cleaner, window cleaner, liquid WC-rim
- High viscosity products include the following: fabric finisher, liquid detergents, liquid detergent gels, detergent paste (hand detergents),
cleaner gels (WC, bathroom, etc.) and hand dishwashSubstance applied in aqueous process solution with negligible volatilizationhttps://echa.europa.eu/csr-es-roadmap/use-maps/use-maps-libraryfalseCONSUMER_USEINDUSTRIALPC_3PC_35PC_8PC_317.5E-4cf. AISE Background documentWide Spread Use in 'Down the Drain' laundry detergents, cleaning and maintenance productsAISE 8a.1a.v3ERC_8a100.00.00.00.004ENVIRONMENT_PLACE_OF_USEfalsetrueENVIRONMENT_PLACE_OF_USE_INDOORWATER_CONTACT_DURING_USEfalsetrueWATER_CONTACT_DURING_USE_YESEUSES_BIOLOGICAL_STPfalsetrueEUSES_BIOLOGICAL_STP-STANDARDWATERWASTE_TREATMENT_CONSIDERATION"Explanation for the CSR" to be reported by each registrant on the specific conditions required for waste treatment:falsetrueWASTE_CONSIDERATION_OTHER_TREATMENTRELEASE_MODULE_REGIONAL_SCALEcf. AISE Background documentfalsefalse4.0025b8ced-ea23-4300-928f-82348f092cc4falsetrue8a9cc976-32a6-4332-95a6-5a9ce7abccf989da0a94-43b2-4b7d-a55a-1e000fcfd7a3falsetrue09373d1b-22be-4885-bd15-79aaed3b8a6eec2738fd-8167-49a2-ac0f-87329ad0519efalsetrued8e2a5fc-30da-4bca-92ee-ce1a3400b72514.07.2020A.I.S.E.IUC5-8da076c6-3275-4851-a726-2586b783a7e82022-03-03T20:41:302022-03-03T20:41:30ACTIVEMarch 2022AISE 2.1j.v3Formulation of liquid Detergents/ Maintenance Products: High Viscosity (large scale >10,000 t product/a)Substance types / functions / properties included or excluded: solid and liquid substances used for the formulation of liquid detergents and maintenance products
Additional specification of product types covered High viscosity products include the following: fabric finisher, liquid detergents, liquid detergent gels, detergent paste (hand detergents), cleaner gels (WC, bathroom, etc.) and hand dishwash. Typically, the viscosity of these products is specified and may need adjustment.Covers the whole process of formulating water-borne mixtures for liquid cleaning and maintenance
products. This includes typical process steps such as, storing, mixing, packaging of substances (as part of mixtures) and associated laboratory activities. Routine equipment cleaning and maintenance is also included and leads to the highest contribution to environmental release.https://echa.europa.eu/csr-es-roadmap/use-maps/use-maps-libraryfalseFORMULATIONINDUSTRIALPC_35300.0cf. AISE Background documentcf. AISE Background documentcf. AISE Background documentcf. AISE Background documentcf. AISE Background documentFormulation of liquid Detergents/ Maintenance Products: High Viscosity (large scale >10,000 t product/a)AISE 2.1j.v3ERC_20.10.00.00.0RELEASE_MODULE_DAILY_USE_AT_SITEThe daily max amount per site (Msafe) is used. The indicative substance use rate (MSPERC) for several ingredient types and guidance for refinement can be found in background documentation.falsetrueEUSES_DISCHARGE_RATE_OF_STPfalsetrue2000.0EUSES_BIOLOGICAL_STPfalsetrueEUSES_BIOLOGICAL_STP-STANDARDWATERAPPLICATION_OF_THE_STPfalsefalseAPPLICATION_OF_THE_STP-YESWASTE_TREATMENT_CONSIDERATION"Explanation for the CSR" to be reported by each registrant on the specific conditions required for waste treatment:falsetrueWASTE_CONSIDERATION_OTHER_TREATMENTENVIRONMENT_PLACE_OF_USEfalsetrueENVIRONMENT_PLACE_OF_USE_INDOORWATER_CONTACT_DURING_USEfalsetrueWATER_CONTACT_DURING_USE_YES18f21585-d45e-4d7d-9be6-d6c3612484ccReduced number of transfer and cleaning operations through e.g. Dedicated storage tanks for raw materials and final products and/or Recovery of materials through e.g. recycling residues of powder ingredients in cleaning steps at packaging or transfer line into the processfalsetruedeeba449-3aaa-4072-a351-eca062e6b948c531adf9-d9ca-41e9-a5b8-83525d0158c7falsetrue8047213b-973f-4159-b2ca-ced001657eb38bacf2ff-f392-4079-95fc-2ccf0f496374Manual removal of residual products adhering to equipment (e.g. by manual scrubbing, vacuum cleaning, etc.) and/or Use of two-liner systems (i.e. single Use disposable reactor cover that is incinerated after Use as solid waste) and/or Use of adsorption pads to clean spillsfalsetrue56fddd1f-bf93-41cc-bd35-3f1128b9e0cbec2738fd-8167-49a2-ac0f-87329ad0519efalsetrue11d0321b-c37a-46fa-8e52-4c24b680ca4520.08.2021A.I.S.E.IUC5-8da076c6-3275-4851-a726-2586b783a7e82022-03-03T20:34:512022-03-03T20:34:51ACTIVEMarch 2022AISE 2.1a.v3Formulation of granular Detergents/ Maintenance Products: Regular & Compact (large scale >10,000 t/ product a)Substance types / functions / properties included or excluded: solid and liquid substances used for the formulation of granular and tableted detergents and maintenance products
Additional specification of product types covered: regular powders with apparent density below ca. 0.75kg/L. Compact powders may be extruded (e.g. pearls) or tableted (tabs) detergents reaching densities of ca. 1.4kg/l.Covers the whole process of formulation as it occurs in the manufacturing of granular cleaning and maintenance products. This includes typical process steps, such as storing, mixing, packaging of substances (as part of mixtures) and associated laboratory activities. Granular detergents are obtained by drying liquid slurries. Tablets are made by compressing powder materialhttps://echa.europa.eu/csr-es-roadmap/use-maps/use-maps-libraryfalseFORMULATIONINDUSTRIALPC_35300.0cf. AISE Background documentcf. AISE Background documentcf. AISE Background documentcf. AISE Background documentcf. AISE Background documentFormulation of granular Detergents/ Maintenance Products: Regular & Compact (large scale >10,000t
product/a)AISE 2.1a.v3ERC_20.050.10.00.0RELEASE_MODULE_DAILY_USE_AT_SITEThe daily max amount per site (Msafe) is used. The indicative substance use rate (MSPERC) for several ingredient types and guidance for refinement can be found in background information.falsetrueEUSES_DISCHARGE_RATE_OF_STPfalsetrue2000.0EUSES_BIOLOGICAL_STPfalsetrueEUSES_BIOLOGICAL_STP-STANDARDWATERAPPLICATION_OF_THE_STPfalsefalseAPPLICATION_OF_THE_STP-YESWASTE_TREATMENT_CONSIDERATION"Explanation for the CSR" to be reported by each registrant on the specific conditions required for waste treatment:falsetrueWASTE_CONSIDERATION_OTHER_TREATMENTENVIRONMENT_PLACE_OF_USEfalsetrueENVIRONMENT_PLACE_OF_USE_INDOORWATER_CONTACT_DURING_USEfalsetrueWATER_CONTACT_DURING_USE_YES18f21585-d45e-4d7d-9be6-d6c3612484ccReduced number of transfer and cleaning operations through e.g. manufacturing of different products from one premix (masterbatch), to which certain ingredients are added to yield the final products and/or Dedicated storage tanks for raw materials, premixes and final products and/or Residues of granular detergents recovered in cleaning steps at packaging or transfer lines are recycled into the slurriesfalsetruee5bf56dd-7306-4865-8d63-f1c642de0263c531adf9-d9ca-41e9-a5b8-83525d0158c7falsetrue73d80ba6-6ebf-426b-8a88-df2841a3e6268bacf2ff-f392-4079-95fc-2ccf0f496374Dry cleaning of equipment, use of Central or Peripheral Vacuum Cleaning and/or cleaning involving so-called pigs in sub-processes involving liquid slurries and/or re-Use of process grey water for cleaningfalsetrue02326a9e-b0b6-4cb0-a545-3f509cdd6fd9ec2738fd-8167-49a2-ac0f-87329ad0519efalsetrue3dbe75c1-81f1-4d9b-8754-a2378661dc5420.08.2021A.I.S.E.IUC5-8da076c6-3275-4851-a726-2586b783a7e82022-03-03T20:44:472022-03-03T20:44:47ACTIVEMarch 2022AISE 4.1.v3Industrial use of Water-borne Processing AidsSubstance types / functions / properties included or excluded: Substances used as processing aids in the chemical industries not becoming part the article
Additional specification of product types covered: Processing aids as defined covers substances in a broad range of specific applications, e.g. industrial laundry, car washing, boat cleaning, process cleaning, CIP cleaning, surface cleaningIndustrial uses of aqueous process solution comprise of preparation of baths and automated cleaning steps prior to any on-site RMM. Spent process fluid is discharged to wastewater.https://echa.europa.eu/csr-es-roadmap/use-maps/use-maps-libraryfalseINDUSTRIAL_USEINDUSTRIALPC_35300.0cf. AISE Background documentcf. AISE Background documentcf. AISE Background documentcf. AISE Background documentcf. AISE Background documentIndustrial use of Water-borne Processing AidsAISE 4.1.v3ERC_4100.00.00.00.0RELEASE_MODULE_DAILY_USE_AT_SITEThe daily max amount per site (Msafe) is used. The indicative worst case substance use rates (MSPERC) of several ingredient types and guidance for
refinement can be found in the AISE background documentation.falsetrueEUSES_DISCHARGE_RATE_OF_STPfalsetrue2000.0EUSES_BIOLOGICAL_STPfalsetrueEUSES_BIOLOGICAL_STP-STANDARDWATERAPPLICATION_OF_THE_STPfalsefalseAPPLICATION_OF_THE_STP-YESWASTE_TREATMENT_CONSIDERATION"Explanation for the CSR" to be reported by each registrant on the specific conditions required for waste treatment:falsetrueWASTE_CONSIDERATION_OTHER_TREATMENTENVIRONMENT_PLACE_OF_USEfalsetrueENVIRONMENT_PLACE_OF_USE_INDOORWATER_CONTACT_DURING_USEfalsetrueWATER_CONTACT_DURING_USE_YES6b70cae5-0bc7-4bc1-81ef-8b2829412318The application fluid is kept in a reservoir. The fluid is pumped to dedicated machine(s) in order to be applied to the substrate or it is kept in a treatment bath (e.g. vehicle cleaning, metal working fluids, etc.). With each piece of substrate a fraction of the application fluid is carried-over from the treatment bath. Via a sequence of rinsing steps this fraction of the application fluid is continuously emitted to the wastewater. The reservoir is continuously replenished; and/or
The application fluid in the reservoir can be disposed of periodically: This may or may not involve on-site pre-treatment or disposal to the wastewater. As a result, constituents of the application fluid are removed during the on-site treatment according to the efficiency of the selected emission reduction. In addition, raw materials may be recovered. The choice of suitable emission reduction technology depends on the process; and/or
Closed system with regards to emissions to the environment. Spent application fluid is not released to the environment. It is disposed of periodically as waste (with or without prior treatment). This type of application includes several surface finishing, water conditioning etc. applications. No emissions to the wastewater occur. The local waste handling regulations have to be followed. Additional instructions for handling waste may be included in the safety data sheet; and/or
Optimized water use due to e.g.: Re-use of rinsing waterfalsetrue8f771761-9030-4dcc-bab4-a1f5accbdef8ec2738fd-8167-49a2-ac0f-87329ad0519efalsetruece920cfd-3a3c-4a48-8f24-6d4d2ca15c6120.01.2021A.I.S.E.IUC5-8da076c6-3275-4851-a726-2586b783a7e82022-03-03T20:15:402022-03-03T20:15:40ACTIVEMarch 2022AISE 5.1b.v3Industrial use of Me-salts in surface treatment of metals and plastics – Zinc, Chromium, Copper, ManganeseSubstance types / functions / properties included or excluded: Covers the use of Zinc-, Chromium, Coper-, Manganese- salts in metal surface Coating applications
Additional specification of product types covered: broad range of specific applications, e.g. surface treatment, metal treatment, surface finishing, conversion coating, corrosion inhibition etc.includes the core process of treating metal surfaces and/or plastics (e.g. Phosphating, Coil coating, Electroplating, Anodizing, Autocatalytic plating) as well as those processes required to support the core process such as storing, mixing, equipment cleaning, maintenance and associated laboratory activities. The treatment of the metal parts can occur by dipping, rolling or by spraying. Product applied in aqueous process solution with negligible volatilization.https://echa.europa.eu/csr-es-roadmap/use-maps/use-maps-libraryfalseINDUSTRIAL_USEINDUSTRIALPC_14300.0cf. AISE Background documentcf. AISE Background documentcf. AISE Background documentcf. AISE Background documentcf. AISE Background documentIndustrial use of Me-salts in surface treatment of metals and plastics – Zinc, Chromium, Copper, ManganeseAISE 5.1b.v3ERC_51.00.00.05.0RELEASE_MODULE_DAILY_USE_AT_SITEThe daily max amount per site (Msafe) is used. The indicative worst case substance use rates (MSPERC) of several ingredient types and guidance for refinement can be found in background documentation.falsetrueEUSES_DISCHARGE_RATE_OF_STPfalsetrue2000.0EUSES_BIOLOGICAL_STPfalsetrueEUSES_BIOLOGICAL_STP-STANDARDWATERAPPLICATION_OF_THE_STPfalsefalseAPPLICATION_OF_THE_STP-YESWASTE_TREATMENT_CONSIDERATION"Explanation for the CSR" to be reported by each registrant on the specific conditions required for waste treatment:falsetrueWASTE_CONSIDERATION_OTHER_TREATMENTENVIRONMENT_PLACE_OF_USEfalsetrueENVIRONMENT_PLACE_OF_USE_INDOORWATER_CONTACT_DURING_USEfalsetrueWATER_CONTACT_DURING_USE_YES6b70cae5-0bc7-4bc1-81ef-8b2829412318Metal salts are dissolved in a water-borne application fluid, which is kept in a reservoir or treatment baths. Metal fluids are continuously emitted to the wastewater via a sequence of rinsing steps. For details of OCs refer to background document”; and/or
Spray applications are housed-in for the sake of worker protection; and/or
Optimized water use due to e.g.: Re-use of rinsing water; and/or
Periodically, the reservoirs are emptied of the spent reservoir fluid and refilled with fresh reservoir fluid. Operators minimize the frequency of exchanging the reservoir fluid to reduce the cost of process chemicals, waste treatment and equipment downtime.falsetrue4334460e-b0a5-43ff-9eb3-a8e63ac82e62ec2738fd-8167-49a2-ac0f-87329ad0519efalsetrueee79f0a9-6969-4b35-b2bb-cc6a0bc191d41a6e55bf-fe3d-4248-8716-928f29cf6e5acf. AISE Background documentfalsetrue7056993d-3468-4df7-a102-1b0a2f92aeb2WATER99.0cf. AISE Background document26.06.2020A.I.S.E.IUC5-8da076c6-3275-4851-a726-2586b783a7e82022-03-03T20:42:202022-03-03T20:42:20ACTIVEMarch 2022AISE 2.1k.v3Formulation of liquid Detergents/ Maintenance Products: High Viscosity (medium scale 1,000 - 10,000t product/a)Substance types / functions / properties included or excluded: solid and liquid substances used for the formulation of liquid detergents and maintenance products
Additional specification of product types covered: High viscosity products include the following: fabric finisher, liquid detergents, liquid detergent gels, detergent paste (hand detergents), cleaner gels (WC, bathroom, etc.) and hand dishwash. Typically, the viscosity of these products is specified and may need adjustment.Covers the whole process of formulation water-borne mixtures for liquid cleaning and maintenance products. This includes typical process steps, such as storing, mixing, packaging of substances (as part of mixtures) and associated laboratory activities. Routine equipment cleaning and maintenance is also included and leads to the highest contribution to environmental release.https://echa.europa.eu/csr-es-roadmap/use-maps/use-maps-libraryfalseFORMULATIONINDUSTRIALPC_35300.0cf. AISE Background documentcf. AISE Background documentcf. AISE Background documentcf. AISE Background documentcf. AISE Background documentFormulation of liquid Detergents/ Maintenance Products: High Viscosity (medium scale 1,000 - 10,000t product/a)AISE 2.1k.v3ERC_20.20.00.00.0RELEASE_MODULE_DAILY_USE_AT_SITEThe daily max amount per site (Msafe) is used. The indicative substance use rate (MSPERC) for several ingredient types and guidance for refinement can be found in background documentation.falsetrueEUSES_DISCHARGE_RATE_OF_STPfalsetrue2000.0EUSES_BIOLOGICAL_STPfalsetrueEUSES_BIOLOGICAL_STP-STANDARDWATERAPPLICATION_OF_THE_STPfalsefalseAPPLICATION_OF_THE_STP-YESWASTE_TREATMENT_CONSIDERATION"Explanation for the CSR" to be reported by each registrant on the specific conditions required for waste treatment:falsetrueWASTE_CONSIDERATION_OTHER_TREATMENTENVIRONMENT_PLACE_OF_USEfalsetrueENVIRONMENT_PLACE_OF_USE_INDOORWATER_CONTACT_DURING_USEfalsetrueWATER_CONTACT_DURING_USE_YES18f21585-d45e-4d7d-9be6-d6c3612484ccReduced number of transfer and cleaning operations through e.g. Dedicated storage tanks for raw materials and final products and/or Recovery of materials through e.g. recycling residues of powder ingredients in cleaning steps at packaging or transfer line into the processfalsetruedeeba449-3aaa-4072-a351-eca062e6b948c531adf9-d9ca-41e9-a5b8-83525d0158c7falsetruef3d0d496-f151-4c1f-a18a-e98e874c626f8bacf2ff-f392-4079-95fc-2ccf0f496374Manual removal of residual products adhering to equipment (e.g. by manual scrubbing, vacuum cleaning, etc.) and/or Use of two-liner systems (i.e. single Use disposable reactor cover that is incinerated after Use as solid waste) and/or Use of adsorption pads to clean spillsfalsetrue56fddd1f-bf93-41cc-bd35-3f1128b9e0cbec2738fd-8167-49a2-ac0f-87329ad0519efalsetrue11d0321b-c37a-46fa-8e52-4c24b680ca4520.08.2021A.I.S.E.IUC5-8da076c6-3275-4851-a726-2586b783a7e82022-03-03T20:43:212022-03-03T20:43:21ACTIVEMarch 2022AISE 2.1l.v3Formulation of liquid Detergents/ Maintenance Products: High Viscosity (small scale <1,000t product/a)Substance types / functions / properties included or excluded: solid and liquid substances used for the formulation of liquid detergents and maintenance products
Additional specification of product types covered: High viscosity products include the following: fabric finisher, liquid detergents, liquid detergent gels, detergent paste (hand detergents), cleaner gels (WC, bathroom, etc.) and hand dishwash. Typically, the viscosity of these products is specified and may need adjustment.Covers the whole process of formulating water-borne mixtures for liquid cleaning and maintenance products. This includes typical process steps, such as storing, mixing, packaging of substances (as part of mixtures) and associated laboratory activities. Routine equipment cleaning and maintenance is also included and leads to the highest impact to environmental release.https://echa.europa.eu/csr-es-roadmap/use-maps/use-maps-libraryfalseFORMULATIONINDUSTRIALPC_35150.0cf. AISE Background documentcf. AISE Background documentcf. AISE Background documentcf. AISE Background documentcf. AISE Background documentFormulation of liquid Detergents/ Maintenance Products: High Viscosity (small scale <1,000t product/a)AISE 2.1l.v3ERC_20.40.00.00.0APPLICATION_OF_THE_STPfalsefalseAPPLICATION_OF_THE_STP-YESEUSES_BIOLOGICAL_STPfalsetrueEUSES_BIOLOGICAL_STP-STANDARDWATEREUSES_DISCHARGE_RATE_OF_STPfalsetrue2000.0RELEASE_MODULE_DAILY_USE_AT_SITEThe daily max amount per site (Msafe) is used. The indicative substance use rate (MSPERC) for several ingredient types and guidance for refinement can be found in background documentation.falsetrueWASTE_TREATMENT_CONSIDERATION"Explanation for the CSR" to be reported by each registrant on the specific conditions required for waste treatment:falsetrueWASTE_CONSIDERATION_OTHER_TREATMENTENVIRONMENT_PLACE_OF_USEfalsetrueENVIRONMENT_PLACE_OF_USE_INDOORWATER_CONTACT_DURING_USEfalsetrueWATER_CONTACT_DURING_USE_YES18f21585-d45e-4d7d-9be6-d6c3612484ccReduced number of transfer and cleaning operations through e.g. Dedicated storage tanks for raw materials and final products and/or Recovery of materials through e.g. recycling residues of powder ingredients in cleaning steps at packaging or transfer line into the processfalsetruedeeba449-3aaa-4072-a351-eca062e6b948c531adf9-d9ca-41e9-a5b8-83525d0158c7falsetruef3d0d496-f151-4c1f-a18a-e98e874c626f8bacf2ff-f392-4079-95fc-2ccf0f496374Manual removal of residual products adhering to equipment (e.g. by manual scrubbing, vacuum cleaning, etc.) and/or Use of two-liner systems (i.e. single Use disposable reactor cover that is incinerated after Use as solid waste) and/or Use of adsorption pads to clean spillsfalsetrue56fddd1f-bf93-41cc-bd35-3f1128b9e0cbec2738fd-8167-49a2-ac0f-87329ad0519efalsetrue11d0321b-c37a-46fa-8e52-4c24b680ca4520.08.2021A.I.S.E.IUC5-8da076c6-3275-4851-a726-2586b783a7e82022-03-03T20:36:462022-03-03T20:36:46ACTIVEMarch 2022AISE 2.1c.v3Formulation of granular Detergents/ Maintenance Products: Regular & Compact (small scale <1,000t product/a)Substance types / functions / properties included or excluded: solid and liquid substances used for the formulation of granular detergents and maintenance products.
Additional specification of product types covered: regular powders with apparent density below ca. 0.75kg/L. Compact powders may be extruded (e.g. pearls) or tableted (tabs) detergents reaching densities of ca. 1.4kg/l.Covers the whole process of formulation as it occurs in the manufacturing of granular cleaning and maintenance products. This includes typical process steps, such as storing, mixing, packaging of substances (as part of mixtures) and associated laboratory activities. Granular detergents are obtained by drying liquid slurries. Tablets are made by compressing powder materialhttps://echa.europa.eu/csr-es-roadmap/use-maps/use-maps-libraryfalseFORMULATIONINDUSTRIALPC_35150.0cf. AISE Background documentcf. AISE Background documentcf. AISE Background documentcf. AISE Background documentcf. AISE Background documentFormulation of granular Detergents/ Maintenance Products: Regular & Compact (small scale <1,000t product/a)AISE 2.1c.v3ERC_20.20.10.00.0RELEASE_MODULE_DAILY_USE_AT_SITEThe daily max amount per site (Msafe) is used. The indicative substance use rate (MSPERC) for several ingredient types and guidance for refinement can be found in background documentation.falsetrueEUSES_DISCHARGE_RATE_OF_STPfalsetrue2000.0EUSES_BIOLOGICAL_STPfalsetrueEUSES_BIOLOGICAL_STP-STANDARDWATERAPPLICATION_OF_THE_STPfalsefalseAPPLICATION_OF_THE_STP-YESWASTE_TREATMENT_CONSIDERATION"Explanation for the CSR" to be reported by each registrant on the specific conditions required for waste treatment:falsetrueWASTE_CONSIDERATION_OTHER_TREATMENTENVIRONMENT_PLACE_OF_USEfalsetrueENVIRONMENT_PLACE_OF_USE_INDOORWATER_CONTACT_DURING_USEfalsetrueWATER_CONTACT_DURING_USE_YES18f21585-d45e-4d7d-9be6-d6c3612484ccReduced number of transfer and cleaning operations through e.g. manufacturing of different products from one premix (masterbatch), to which certain ingredients are added to yield the final products and/or Dedicated storage tanks for raw materials, premixes and final products and/or Residues of granular detergents recovered in cleaning steps at packaging or transfer lines are recycled into the slurriesfalsetruee5bf56dd-7306-4865-8d63-f1c642de0263c531adf9-d9ca-41e9-a5b8-83525d0158c7falsetrue2093dcfc-05f9-4683-932e-460d146b1a638bacf2ff-f392-4079-95fc-2ccf0f496374Dry cleaning of equipment, use of Central or Peripheral Vacuum Cleaning and/or cleaning involving so-called pigs in sub-processes involving liquid slurries and/or re-Use of process grey water for cleaningfalsetrue02326a9e-b0b6-4cb0-a545-3f509cdd6fd9ec2738fd-8167-49a2-ac0f-87329ad0519efalsetrue3dbe75c1-81f1-4d9b-8754-a2378661dc5420.08.2021A.I.S.E.IUC5-8da076c6-3275-4851-a726-2586b783a7e82022-03-03T20:13:492022-03-03T20:13:49ACTIVEMarch 2022AISE 5.1a.v3Industrial use of Me-salts in surface treatment of metals and plastics – NickelSubstance types / functions / properties included or excluded: Covers the use of Nickel-salts in metal surface coating applications.
Additional specification of product types covered: broad range of specific water-based applications, e.g. surface treatment, metal treatment, conversion coating, surface finishing, corrosion inhibition etc.includes the core process of treating metal and/or plastic surfaces (e.g. Phosphating, Electroplating, Cold sealing, Autocatalytic plating) as well as those processes required to support the core process such as storing, mixing, equipment cleaning, maintenance and associated laboratory activities. The treatment of the metal parts can occur by dipping, rolling or by spraying. Product applied in aqueous process solution with negligible volatilization. Spent fluid discharged to wastewater.https://echa.europa.eu/csr-es-roadmap/use-maps/use-maps-libraryfalseINDUSTRIAL_USEINDUSTRIALPC_14300.0cf. AISE Background documentcf. AISE Background documentcf. AISE Background documentcf. AISE Background documentcf. AISE Background documentIndustrial use of Me-salts in surface treatment of metals and plastics – NickelAISE 5.1a.v3ERC_55.00.00.05.0RELEASE_MODULE_DAILY_USE_AT_SITEthe daily max amount per site (Msafe) is used. The indicative worst case substance use rates (MSPERC) of several ingredient types and guidance for refinement can be found in background documentation.falsetrueEUSES_DISCHARGE_RATE_OF_STPfalsetrue2000.0EUSES_BIOLOGICAL_STPfalsetrueEUSES_BIOLOGICAL_STP-STANDARDWATERAPPLICATION_OF_THE_STPfalsefalseAPPLICATION_OF_THE_STP-YESWASTE_TREATMENT_CONSIDERATION"Explanation for the CSR" to be reported by each registrant on the specific conditions required for waste treatment:falsetrueWASTE_CONSIDERATION_OTHER_TREATMENTENVIRONMENT_PLACE_OF_USEfalsetrueENVIRONMENT_PLACE_OF_USE_INDOORec2738fd-8167-49a2-ac0f-87329ad0519efalsetrueee79f0a9-6969-4b35-b2bb-cc6a0bc191d4WATER_CONTACT_DURING_USEfalsetrueWATER_CONTACT_DURING_USE_YES6b70cae5-0bc7-4bc1-81ef-8b2829412318Metal salts are dissolved in a water-borne application fluid, which is kept in a reservoir or treatment baths. Metal fluids are continuously emitted to the wastewater via a sequence of rinsing steps. For details of OCs refer to background document”; and/or
Spray applications are housed-in for the sake of worker protection; and/or
Optimized water use due to e.g.: Re-use of rinsing water; and/or
Periodically, the reservoirs are emptied of the spent reservoir fluid and refilled with fresh reservoir fluid. Operators minimize the frequency of exchanging the reservoir fluid to reduce the cost of process chemicals, waste treatment and equipment downtime.falsetrue4334460e-b0a5-43ff-9eb3-a8e63ac82e621a6e55bf-fe3d-4248-8716-928f29cf6e5afalsetrue7056993d-3468-4df7-a102-1b0a2f92aeb2WATER95.0cf. AISE Background document26.06.2020A.I.S.E.IUC5-8da076c6-3275-4851-a726-2586b783a7e82021-11-09T19:37:562021-11-30T13:25:22ACTIVENov 2021AISE 8a.1b.v3Wide Spread Use in Aerosol products for cleaning and maintenance products (non-volatile)Substance types / functions / properties included or excluded: Covers the use of non-volatile substances in cleaning and maintenance aerosol products. Volatile substances are defined by a boiling point threshold of <250°C. Non-volatile constituents which will be picked up by a cleaning cloth after spraying onto cleaning surface and will be transferred to the waste water system in the next washing event. cf. background document for further details.
Additional specification of product types covered: covers professional and consumer aerosol applicationsSpraying of non-volatile solids to indoor surfaces for cleaning and maintenance purposeshttps://echa.europa.eu/csr-es-roadmap/use-maps/use-maps-libraryfalseCONSUMER_USEINDUSTRIALPC_3PC_35PC_8PC_317.5E-4cf. AISE Background documentcf. AISE Background documentcf. AISE Background documentcf. AISE Background documentcf. AISE Background documentWide Spread Use in Aerosol products for cleaning and maintenance products (non-volatile)AISE 8a.1b.v3ERC_8a100.00.00.00.004EUSES_BIOLOGICAL_STPfalsetrueEUSES_BIOLOGICAL_STP-STANDARDWATERWASTE_TREATMENT_CONSIDERATION"Explanation for the CSR" to be reported by each registrant on the specific conditions required for waste treatment:falsetrueWASTE_CONSIDERATION_OTHER_TREATMENTRELEASE_MODULE_REGIONAL_SCALEcf. AISE Background documentfalsefalse4.0ENVIRONMENT_PLACE_OF_USEfalsetrueENVIRONMENT_PLACE_OF_USE_INDOORWATER_CONTACT_DURING_USEfalsetrueWATER_CONTACT_DURING_USE_YES21f4b32b-ab1b-4fdc-9ae4-314b84e94e94falsefalse95babb9e-8ade-44ca-947b-3349a763eee6ec2738fd-8167-49a2-ac0f-87329ad0519efalsetrued8e2a5fc-30da-4bca-92ee-ce1a3400b72514.07.2020A.I.S.E.IUC5-8da076c6-3275-4851-a726-2586b783a7e82021-01-04T15:26:452021-01-06T16:41:35ACTIVE4/01/2021
<text>Brushing; Automated task; Level II</text>
AISE_SWED_IS_10_1The product is brushed on and wiped off surfaces in a defined open processes.falseBrushing; Automated taskPROC_10W_PERCENTAGE_OF_SUBSTANCE_IN_MIXTUREThe risk assessor using this SWED should indicate the maximum concentration for the relevant substance that can be used safely considering the conditions of use indicated in this SWED. In the Chesar file prepared by A.I.S.E. the default value for this field is set at 100%, unless manually modified by the risk assessor.falsetrue100.0W_PHYSICAL_FORM_OF_PRODUCTProduct ingredients mixed, diluted and/or suspendedfalsefalseW_PHYSICAL_FORM_OF_PRODUCT-LIQUIDDURATION_OF_ACTIVITYduring a whole shiftfalsetrue8.0TRA-WORKER-PLACE_OF_USEindoors at industrial sitesfalsetrueTRA-WORKER-INDOOROPERATING_TEMPERATURECovers use at ambient temperatures.falsetrue25.0TRA-WORKER-OCCUPATIONAL-HYGIENE-PRACTICEfalsetrueTRA-WORKER-OCCUPATIONAL-HYGIENE-PRACTICE-INDUSTRIALUSE_EYE_PROTECTIONSuitable eye protection might be recommended in the SDS by the formulator depending on the product.falsefalseUSE_EYE_PROTECTION-NOTRA-WORKER-RESPIRATORY-PROTECTIONfalsefalseTRA-WORKER-RESPIRATORY-PROTECTION_NOT_USED_VOTRA-WORKER-DERMAL-PROTECTIONfalseESCom-10133224896ESCom-12355002165trueTRA-WORKER-DERMAL-PROTECTION_PPE80TRA-WORKER-GENERAL_VENTILATIONfalsefalseTRA-WORKER-GENERAL_VENTILATION-BASICTRA-WORKER-LOCAL-EXHAUST-VENTILATIONfalsefalseTRA-WORKER-LOCAL-EXHAUST-VENTILATION-NO4/01/2021falseA.I.S.E.IUC5-8da076c6-3275-4851-a726-2586b783a7e82021-01-06T09:32:332021-01-06T16:49:23ACTIVE4/01/2021
<text>Transfer and dilution of concentrated product by using dedicated dosing system; Level I</text>
AISE_SWED_IS_8b_2_LThe product is filled from large containers into a machine or a vessel.
Filling means to link and delink a tube with the container.
It is a short process.falseTransfer and dilution of concentrated product by using dedicated dosing systemPROC_8bW_PERCENTAGE_OF_SUBSTANCE_IN_MIXTUREThe risk assessor using this SWED should indicate the maximum concentration for the relevant substance that can be used safely considering the conditions of use indicated in this SWED. In the Chesar file prepared by A.I.S.E. the default value for this field is set at 100%, unless manually modified by the risk assessor.falsetrue100.0W_PHYSICAL_FORM_OF_PRODUCTAutomatic transfer of liquid from large container/ bag to pumping and dosing equipment.falsefalseW_PHYSICAL_FORM_OF_PRODUCT-LIQUIDDURATION_OF_ACTIVITYThe contact time during filling is short. The dosing of products occurs automatically into dedicated systems or equipment.falsetrue1.0TRA-WORKER-PLACE_OF_USEfalsetrueTRA-WORKER-INDOOROPERATING_TEMPERATURECovers use at ambient temperatures.falsetrue25.0TRA-WORKER-OCCUPATIONAL-HYGIENE-PRACTICEfalsetrueTRA-WORKER-OCCUPATIONAL-HYGIENE-PRACTICE-INDUSTRIALUSE_EYE_PROTECTIONSuitable eye protection might be recommended in the SDS by the formulator depending on the product.falsefalseUSE_EYE_PROTECTION-NOTRA-WORKER-RESPIRATORY-PROTECTIONfalsefalseTRA-WORKER-RESPIRATORY-PROTECTION_NOT_USED_VOTRA-WORKER-DERMAL-PROTECTIONfalsefalseTRA-WORKER-DERMAL-PROTECTION_NOTRA-WORKER-GENERAL_VENTILATIONfalsefalseTRA-WORKER-GENERAL_VENTILATION-BASICTRA-WORKER-LOCAL-EXHAUST-VENTILATIONfalsefalseTRA-WORKER-LOCAL-EXHAUST-VENTILATION-NO4/01/2021falseA.I.S.E. - SWED migration517c9e38-c41a-43c3-ab4c-0c58b7aaca612020-12-08T14:48:502020-12-08T14:48:50ACTIVE30/11/2020
<text>Professional uses; Brushing after trigger spraying or brushing with tools; Level I</text>
AISE_SWED_PW_10_1Brushing after trigger spraying or brushing with toolsfalseProfessional uses; Brushing after trigger spraying or brushing with toolsPROC_10W_PERCENTAGE_OF_SUBSTANCE_IN_MIXTUREThe risk assessor using this SWED should indicate the maximum concentration for the relevant substance that can be used safely considering the conditions of use indicated in this SWED. In the Chesar file prepared by A.I.S.E. the default value for this field is set at 100%, unless manually modified by the risk assessor.falsetrue100.0W_PHYSICAL_FORM_OF_PRODUCTProduct ingredients mixed, diluted and/or suspendedfalsefalseW_PHYSICAL_FORM_OF_PRODUCT-LIQUIDDURATION_OF_ACTIVITYduring a whole shiftfalsetrue8.0TRA-WORKER-PLACE_OF_USEfalsetrueTRA-WORKER-INDOOROPERATING_TEMPERATURECovers use at ambient temperatures.falsetrue25.0TRA-WORKER-OCCUPATIONAL-HYGIENE-PRACTICEfalsefalseTRA-WORKER-OCCUPATIONAL-HYGIENE-PRACTICE-PROFESSIONALUSE_EYE_PROTECTIONSuitable eye protection might be recommended in the SDS by the formulator depending on the productfalsefalseUSE_EYE_PROTECTION-NOTRA-WORKER-RESPIRATORY-PROTECTIONfalsefalseTRA-WORKER-RESPIRATORY-PROTECTION_NOT_USED_VOTRA-WORKER-DERMAL-PROTECTIONfalsefalseTRA-WORKER-DERMAL-PROTECTION_NOTRA-WORKER-GENERAL_VENTILATIONfalsefalseTRA-WORKER-GENERAL_VENTILATION-BASICTRA-WORKER-LOCAL-EXHAUST-VENTILATIONfalsefalseTRA-WORKER-LOCAL-EXHAUST-VENTILATION-NOfalseA.I.S.E.IUC5-8da076c6-3275-4851-a726-2586b783a7e82021-10-19T13:40:162021-11-30T11:46:32ACTIVE
<text>Transfer of product via a dedicated system (bottle/bucket/machine)</text>
AISE_SWED_PW_8b_1The product is filled from large containers into a bottle, a bucket or a machine, with dedicated equipment and containment techniques in place.falsePROC_8bW_PERCENTAGE_OF_SUBSTANCE_IN_MIXTUREfalsetrue100.0W_PHYSICAL_FORM_OF_PRODUCTfalsetrueW_PHYSICAL_FORM_OF_PRODUCT-LIQUIDDURATION_OF_ACTIVITYfalsetrue1.0TRA-WORKER-PLACE_OF_USEfalsetrueTRA-WORKER-INDOOROPERATING_TEMPERATUREfalsetrue25.0TRA-WORKER-OCCUPATIONAL-HYGIENE-PRACTICEfalsefalseTRA-WORKER-OCCUPATIONAL-HYGIENE-PRACTICE-PROFESSIONALTRA-WORKER-GENERAL_VENTILATIONfalsefalseTRA-WORKER-GENERAL_VENTILATION-BASICTRA-WORKER-LOCAL-EXHAUST-VENTILATIONfalsefalseTRA-WORKER-LOCAL-EXHAUST-VENTILATION-NOTRA-WORKER-RESPIRATORY-PROTECTIONfalsefalseTRA-WORKER-RESPIRATORY-PROTECTION_NOT_USED_VOTRA-WORKER-DERMAL-PROTECTIONfalsefalseTRA-WORKER-DERMAL-PROTECTION_NOUSE_EYE_PROTECTIONfalsefalseUSE_EYE_PROTECTION-NOOct 2021falseA.I.S.E.IUC5-8da076c6-3275-4851-a726-2586b783a7e82021-01-06T09:42:332021-01-06T16:51:07ACTIVE4/01/2021
<text>Professional uses; Spraying; Level II</text>
AISE_SWED_PW_11_3Spraying application of product.falseProfessional uses; SprayingPROC_11W_PERCENTAGE_OF_SUBSTANCE_IN_MIXTUREThe risk assessor using this SWED should indicate the maximum concentration for the relevant substance that can be used safely considering the conditions of use indicated in this SWED. In the Chesar file prepared by A.I.S.E. the default value for this field is set at 100%, unless manually modified by the risk assessor.falsetrue100.0W_PHYSICAL_FORM_OF_PRODUCTProduct ingredients mixed, diluted and/or suspendedfalsefalseW_PHYSICAL_FORM_OF_PRODUCT-LIQUIDDURATION_OF_ACTIVITYduring a whole shiftfalsetrue8.0TRA-WORKER-PLACE_OF_USEfalsetrueTRA-WORKER-INDOOROPERATING_TEMPERATURECovers use at ambient temperatures.falsetrue25.0TRA-WORKER-OCCUPATIONAL-HYGIENE-PRACTICEfalsefalseTRA-WORKER-OCCUPATIONAL-HYGIENE-PRACTICE-PROFESSIONALUSE_EYE_PROTECTIONSuitable eye protection might be recommended in the SDS by the formulator depending on the productfalsefalseUSE_EYE_PROTECTION-NOTRA-WORKER-RESPIRATORY-PROTECTIONfalsefalseTRA-WORKER-RESPIRATORY-PROTECTION_NOT_USED_VOTRA-WORKER-DERMAL-PROTECTIONfalseESCom-10133224896ESCom-12355002165trueTRA-WORKER-DERMAL-PROTECTION_PPE80TRA-WORKER-GENERAL_VENTILATIONfalsefalseTRA-WORKER-GENERAL_VENTILATION-BASICTRA-WORKER-LOCAL-EXHAUST-VENTILATIONfalsefalseTRA-WORKER-LOCAL-EXHAUST-VENTILATION-NO4/01/2021falseA.I.S.E.IUC5-8da076c6-3275-4851-a726-2586b783a7e82021-01-06T09:44:332021-01-06T16:51:56ACTIVE4/01/2021
<text>Professional uses; Treatment of articles by dipping, soaking or pouring; short-term; Level II</text>
AISE_SWED_PW_13_3Treatment of articles by dipping or pouring.falseProfessional uses; Treatment of articles by dipping, soaking or pouring; short-termPROC_13W_PERCENTAGE_OF_SUBSTANCE_IN_MIXTUREThe risk assessor using this SWED should indicate the maximum concentration for the relevant substance that can be used safely considering the conditions of use indicated in this SWED. In the Chesar file prepared by A.I.S.E. the default value for this field is set at 100%, unless manually modified by the risk assessor.falsetrue100.0W_PHYSICAL_FORM_OF_PRODUCTProduct ingredients mixed, diluted and/or suspendedfalsefalseW_PHYSICAL_FORM_OF_PRODUCT-LIQUIDDURATION_OF_ACTIVITYfalsetrue0.25TRA-WORKER-PLACE_OF_USEfalsetrueTRA-WORKER-INDOOROPERATING_TEMPERATURECovers use at ambient temperatures.falsetrue25.0TRA-WORKER-OCCUPATIONAL-HYGIENE-PRACTICEfalsefalseTRA-WORKER-OCCUPATIONAL-HYGIENE-PRACTICE-PROFESSIONALUSE_EYE_PROTECTIONSuitable eye protection might be recommended in the SDS by the formulator depending on the productfalsefalseUSE_EYE_PROTECTION-NOTRA-WORKER-RESPIRATORY-PROTECTIONfalsefalseTRA-WORKER-RESPIRATORY-PROTECTION_NOT_USED_VOTRA-WORKER-DERMAL-PROTECTIONfalseESCom-10133224896ESCom-12355002165trueTRA-WORKER-DERMAL-PROTECTION_PPE80TRA-WORKER-GENERAL_VENTILATIONfalsefalseTRA-WORKER-GENERAL_VENTILATION-BASICTRA-WORKER-LOCAL-EXHAUST-VENTILATIONfalsefalseTRA-WORKER-LOCAL-EXHAUST-VENTILATION-NO4/01/2021falseA.I.S.E. - SWED migration517c9e38-c41a-43c3-ab4c-0c58b7aaca612020-12-08T14:50:032020-12-08T14:50:03ACTIVE30/11/2020
<text>Professional uses; (Trigger) spraying; Level I</text>
AISE_SWED_PW_11_1Spraying application of product.falseProfessional uses; (Trigger) spraying;PROC_11W_PERCENTAGE_OF_SUBSTANCE_IN_MIXTUREThe risk assessor using this SWED should indicate the maximum concentration for the relevant substance that can be used safely considering the conditions of use indicated in this SWED. In the Chesar file prepared by A.I.S.E. the default value for this field is set at 100%, unless manually modified by the risk assessor.falsetrue100.0W_PHYSICAL_FORM_OF_PRODUCTProduct ingredients mixed, diluted and/or suspendedfalsefalseW_PHYSICAL_FORM_OF_PRODUCT-LIQUIDDURATION_OF_ACTIVITYfalsetrue1.0TRA-WORKER-PLACE_OF_USEfalsetrueTRA-WORKER-INDOOROPERATING_TEMPERATURECovers use at ambient temperatures.falsetrue25.0TRA-WORKER-OCCUPATIONAL-HYGIENE-PRACTICEfalsefalseTRA-WORKER-OCCUPATIONAL-HYGIENE-PRACTICE-PROFESSIONALUSE_EYE_PROTECTIONSuitable eye protection might be recommended in the SDS by the formulator depending on the productfalsefalseUSE_EYE_PROTECTION-NOTRA-WORKER-RESPIRATORY-PROTECTIONfalsefalseTRA-WORKER-RESPIRATORY-PROTECTION_NOT_USED_VOTRA-WORKER-DERMAL-PROTECTIONfalsefalseTRA-WORKER-DERMAL-PROTECTION_NOTRA-WORKER-GENERAL_VENTILATIONfalsefalseTRA-WORKER-GENERAL_VENTILATION-BASICTRA-WORKER-LOCAL-EXHAUST-VENTILATIONfalsefalseTRA-WORKER-LOCAL-EXHAUST-VENTILATION-NOfalseA.I.S.E.IUC5-8da076c6-3275-4851-a726-2586b783a7e82021-01-06T09:33:032021-01-06T16:49:49ACTIVE4/01/2021
<text>Transfer and dilution of concentrated product by using dedicated dosing system; Level I</text>
AISE_SWED_IS_8b_2_SThe product is filled from large containers into a machine or a vessel.
Filling means to link and delink a tube with the container.
It is a short process.falseTransfer and dilution of concentrated product by using dedicated dosing systemPROC_8bW_PERCENTAGE_OF_SUBSTANCE_IN_MIXTUREThe risk assessor using this SWED should indicate the maximum concentration for the relevant substance that can be used safely considering the conditions of use indicated in this SWED. In the Chesar file prepared by A.I.S.E. the default value for this field is set at 100%, unless manually modified by the risk assessor.falsetrue100.0W_PHYSICAL_FORM_OF_PRODUCTPowder. Automatic transfer of powders from large container/ bag to pumping and dosing equipment.falsefalseW_PHYSICAL_FORM_OF_PRODUCT-SOLID_HIGHDURATION_OF_ACTIVITYThe contact time during filling is short. The dosing of products occurs automatically into dedicated systems or equipment.falsetrue1.0TRA-WORKER-PLACE_OF_USEfalsetrueTRA-WORKER-INDOOROPERATING_TEMPERATURECovers use at ambient temperatures.falsetrue25.0TRA-WORKER-OCCUPATIONAL-HYGIENE-PRACTICEfalsetrueTRA-WORKER-OCCUPATIONAL-HYGIENE-PRACTICE-INDUSTRIALUSE_EYE_PROTECTIONSuitable eye protection might be recommended in the SDS by the formulator depending on the product.falsefalseUSE_EYE_PROTECTION-NOTRA-WORKER-RESPIRATORY-PROTECTIONfalsefalseTRA-WORKER-RESPIRATORY-PROTECTION_NOT_USED_VOTRA-WORKER-DERMAL-PROTECTIONfalsefalseTRA-WORKER-DERMAL-PROTECTION_NOTRA-WORKER-GENERAL_VENTILATIONfalsefalseTRA-WORKER-GENERAL_VENTILATION-BASICTRA-WORKER-LOCAL-EXHAUST-VENTILATIONfalsefalseTRA-WORKER-LOCAL-EXHAUST-VENTILATION-NO4/01/2021falseA.I.S.E.IUC5-8da076c6-3275-4851-a726-2586b783a7e82021-01-06T09:02:352021-01-06T16:45:34ACTIVE4/01/2021
<text>Industrial uses; Automated task; Semi-automated task; Dedicated equipment; Level I</text>
AISE_SWED_IS_4_1Automated or semi-automated application of products in a semiclosed process.
Examples are the steps of product rinse in washing and disinfecting applications.falseIndustrial uses; Automated task; Semi-automated task; Dedicated equipmentPROC_4W_PERCENTAGE_OF_SUBSTANCE_IN_MIXTUREThe risk assessor using this SWED should indicate the maximum concentration for the relevant substance that can be used safely considering the conditions of use indicated in this SWED. In the Chesar file prepared by A.I.S.E. the default value for this field is set at 100%, unless manually modified by the risk assessor.falsetrue100.0W_PHYSICAL_FORM_OF_PRODUCTProduct ingredients mixed, diluted and/or suspendedfalsefalseW_PHYSICAL_FORM_OF_PRODUCT-LIQUIDDURATION_OF_ACTIVITYduring a whole shiftfalsetrue8.0TRA-WORKER-PLACE_OF_USESuitable eye protection might be recommended in the SDS by the formulator depending on the product.falsetrueTRA-WORKER-INDOOROPERATING_TEMPERATUREfalsetrue70.0TRA-WORKER-OCCUPATIONAL-HYGIENE-PRACTICEfalsetrueTRA-WORKER-OCCUPATIONAL-HYGIENE-PRACTICE-INDUSTRIALUSE_EYE_PROTECTIONSuitable eye protection might be recommended in the SDS by the formulator depending on the product.falsefalseUSE_EYE_PROTECTION-NOTRA-WORKER-RESPIRATORY-PROTECTIONfalsefalseTRA-WORKER-RESPIRATORY-PROTECTION_NOT_USED_VOTRA-WORKER-DERMAL-PROTECTIONfalsefalseTRA-WORKER-DERMAL-PROTECTION_NOTRA-WORKER-GENERAL_VENTILATIONfalsefalseTRA-WORKER-GENERAL_VENTILATION-BASICTRA-WORKER-LOCAL-EXHAUST-VENTILATIONfalsefalseTRA-WORKER-LOCAL-EXHAUST-VENTILATION-NO4/01/2021falseA.I.S.E.IUC5-8da076c6-3275-4851-a726-2586b783a7e82021-01-06T09:45:292021-01-06T16:52:22ACTIVE4/01/2021
<text>Professional uses; Manual application; Level II</text>
AISE_SWED_PW_19_2Manual application of product.falseProfessional uses; Manual applicationPROC_19W_PERCENTAGE_OF_SUBSTANCE_IN_MIXTUREThe risk assessor using this SWED should indicate the maximum concentration for the relevant substance that can be used safely considering the conditions of use indicated in this SWED. In the Chesar file prepared by A.I.S.E. the default value for this field is set at 100%, unless manually modified by the risk assessor.falsetrue100.0W_PHYSICAL_FORM_OF_PRODUCTProduct ingredients mixed, diluted and/or suspendedfalsefalseW_PHYSICAL_FORM_OF_PRODUCT-LIQUIDDURATION_OF_ACTIVITYduring a whole shiftfalsetrue8.0TRA-WORKER-PLACE_OF_USEfalsetrueTRA-WORKER-INDOOROPERATING_TEMPERATURECovers use at ambient temperatures.falsetrue25.0TRA-WORKER-OCCUPATIONAL-HYGIENE-PRACTICEfalsefalseTRA-WORKER-OCCUPATIONAL-HYGIENE-PRACTICE-PROFESSIONALUSE_EYE_PROTECTIONSuitable eye protection might be recommended in the SDS by the formulator depending on the productfalsefalseUSE_EYE_PROTECTION-NOTRA-WORKER-RESPIRATORY-PROTECTIONfalsefalseTRA-WORKER-RESPIRATORY-PROTECTION_NOT_USED_VOTRA-WORKER-DERMAL-PROTECTIONfalseESCom-10133224896ESCom-12355002165trueTRA-WORKER-DERMAL-PROTECTION_PPE80TRA-WORKER-GENERAL_VENTILATIONfalsefalseTRA-WORKER-GENERAL_VENTILATION-BASICTRA-WORKER-LOCAL-EXHAUST-VENTILATIONfalsefalseTRA-WORKER-LOCAL-EXHAUST-VENTILATION-NO4/01/2021falseA.I.S.E.IUC5-8da076c6-3275-4851-a726-2586b783a7e82021-01-06T09:01:532021-01-06T16:45:09ACTIVE4/01/2021
<text>Industrial uses; use in closed process</text>
AISE_SWED_IS_2_1Application of the product is highly automated in a closed continuous process.falseIndustrial uses; use in closed processPROC_2W_PERCENTAGE_OF_SUBSTANCE_IN_MIXTUREThe risk assessor using this SWED should indicate the maximum concentration for the relevant substance that can be used safely considering the conditions of use indicated in this SWED. In the Chesar file prepared by A.I.S.E. the default value for this field is set at 100%, unless manually modified by the risk assessor.falsetrue100.0W_PHYSICAL_FORM_OF_PRODUCTProduct ingredients mixed, diluted and/or suspendedfalsefalseW_PHYSICAL_FORM_OF_PRODUCT-LIQUIDDURATION_OF_ACTIVITYduring a whole shiftfalsetrue8.0TRA-WORKER-PLACE_OF_USEIndoors at industrial sites in a fully enclosed equipmentfalsetrueTRA-WORKER-INDOOROPERATING_TEMPERATUREfalsetrue70.0TRA-WORKER-OCCUPATIONAL-HYGIENE-PRACTICEfalsetrueTRA-WORKER-OCCUPATIONAL-HYGIENE-PRACTICE-INDUSTRIALUSE_EYE_PROTECTIONSuitable eye protection might be recommended in the SDS by the formulator depending on the product.falsefalseUSE_EYE_PROTECTION-NOTRA-WORKER-RESPIRATORY-PROTECTIONfalsefalseTRA-WORKER-RESPIRATORY-PROTECTION_NOT_USED_VOTRA-WORKER-DERMAL-PROTECTIONfalsefalseTRA-WORKER-DERMAL-PROTECTION_NOTRA-WORKER-GENERAL_VENTILATIONfalsefalseTRA-WORKER-GENERAL_VENTILATION-BASICTRA-WORKER-LOCAL-EXHAUST-VENTILATIONfalsefalseTRA-WORKER-LOCAL-EXHAUST-VENTILATION-NO4/01/2021falseA.I.S.E. - SWED migration517c9e38-c41a-43c3-ab4c-0c58b7aaca612020-12-08T14:53:352020-12-08T14:53:35ACTIVE30/11/2020
<text>Professional uses; Treatment of articles by dipping, soaking or pouring; Level I</text>
AISE_SWED_PW_13_2Treatment of articles by dipping or pouring.falseProfessional uses; Treatment of articles by dipping, soaking or pouringPROC_13W_PERCENTAGE_OF_SUBSTANCE_IN_MIXTUREThe risk assessor using this SWED should indicate the maximum concentration for the relevant substance that can be used safely considering the conditions of use indicated in this SWED. In the Chesar file prepared by A.I.S.E. the default value for this field is set at 100%, unless manually modified by the risk assessor.falsetrue100.0W_PHYSICAL_FORM_OF_PRODUCTProduct ingredients mixed, diluted and/or suspendedfalsefalseW_PHYSICAL_FORM_OF_PRODUCT-LIQUIDDURATION_OF_ACTIVITYfalsetrue1.0TRA-WORKER-PLACE_OF_USEfalsetrueTRA-WORKER-INDOOROPERATING_TEMPERATURECovers use at ambient temperatures.falsetrue25.0TRA-WORKER-OCCUPATIONAL-HYGIENE-PRACTICEfalsefalseTRA-WORKER-OCCUPATIONAL-HYGIENE-PRACTICE-PROFESSIONALUSE_EYE_PROTECTIONSuitable eye protection might be recommended in the SDS by the formulator depending on the productfalsefalseUSE_EYE_PROTECTION-NOTRA-WORKER-RESPIRATORY-PROTECTIONfalsefalseTRA-WORKER-RESPIRATORY-PROTECTION_NOT_USED_VOTRA-WORKER-DERMAL-PROTECTIONfalsefalseTRA-WORKER-DERMAL-PROTECTION_NOTRA-WORKER-GENERAL_VENTILATIONfalsefalseTRA-WORKER-GENERAL_VENTILATION-BASICTRA-WORKER-LOCAL-EXHAUST-VENTILATIONfalsefalseTRA-WORKER-LOCAL-EXHAUST-VENTILATION-NOfalseA.I.S.E. - SWED migration517c9e38-c41a-43c3-ab4c-0c58b7aaca612020-12-08T15:00:392020-12-08T15:00:39ACTIVE30/11/2020
<text>Transfer of product via a dedicated system (bottle/machine); Level I</text>
AISE_SWED_PW_8a_2_SThe product is filled from large containers into a bottle, a bucket or a machine, without dedicated equipment and containment techniques in place.
It is a short process.falseTransfer of product via a dedicated system (bottle/machine)PROC_8aW_PERCENTAGE_OF_SUBSTANCE_IN_MIXTUREThe risk assessor using this SWED should indicate the maximum concentration for the relevant substance that can be used safely considering the conditions of use indicated in this SWED. In the Chesar file prepared by A.I.S.E. the default value for this field is set at 100%, unless manually modified by the risk assessor.falsetrue100.0W_PHYSICAL_FORM_OF_PRODUCTPowder. Transfer of powders from large container/ bag to pumping and dosing equipment.falsefalseW_PHYSICAL_FORM_OF_PRODUCT-SOLID_HIGHDURATION_OF_ACTIVITYThe contact time during filling is short. The dosing of products occurs automatically into dedicated systems or equipment.falsetrue1.0TRA-WORKER-PLACE_OF_USEfalsetrueTRA-WORKER-INDOOROPERATING_TEMPERATURECovers use at ambient temperatures.falsetrue25.0TRA-WORKER-OCCUPATIONAL-HYGIENE-PRACTICEfalsefalseTRA-WORKER-OCCUPATIONAL-HYGIENE-PRACTICE-PROFESSIONALUSE_EYE_PROTECTIONSuitable eye protection might be recommended in the SDS by the formulator depending on the product.falsefalseUSE_EYE_PROTECTION-NOTRA-WORKER-RESPIRATORY-PROTECTIONfalsefalseTRA-WORKER-RESPIRATORY-PROTECTION_NOT_USED_VOTRA-WORKER-DERMAL-PROTECTIONfalsefalseTRA-WORKER-DERMAL-PROTECTION_NOTRA-WORKER-GENERAL_VENTILATIONfalsefalseTRA-WORKER-GENERAL_VENTILATION-BASICTRA-WORKER-LOCAL-EXHAUST-VENTILATIONfalsefalseTRA-WORKER-LOCAL-EXHAUST-VENTILATION-NOfalseA.I.S.E.IUC5-8da076c6-3275-4851-a726-2586b783a7e82021-01-06T09:27:182021-01-06T16:47:57ACTIVE4/01/2021
<text>Industrial spraying; Automated task; Open system; Long term; Level II</text>
AISE_SWED_IS_7_4The product is pumped and sprayed under low pressure with lances onto the surface.
The spray application can be followed by a brushing wiping operation, where the residual dirt is removed with a brush or towel or similar tool.falseIndustrial spraying; Automated task; Open system; Long termPROC_7W_PERCENTAGE_OF_SUBSTANCE_IN_MIXTUREThe risk assessor using this SWED should indicate the maximum concentration for the relevant substance that can be used safely considering the conditions of use indicated in this SWED. In the Chesar file prepared by A.I.S.E. the default value for this field is set at 100%, unless manually modified by the risk assessor.falsetrue100.0W_PHYSICAL_FORM_OF_PRODUCTProduct ingredients mixed, diluted and/or suspendedfalsefalseW_PHYSICAL_FORM_OF_PRODUCT-LIQUIDDURATION_OF_ACTIVITYduring a whole shiftfalsetrue8.0TRA-WORKER-PLACE_OF_USEindoors at industrial sitesfalsetrueTRA-WORKER-INDOOROPERATING_TEMPERATURECovers use at ambient temperatures.falsetrue25.0TRA-WORKER-OCCUPATIONAL-HYGIENE-PRACTICEfalsetrueTRA-WORKER-OCCUPATIONAL-HYGIENE-PRACTICE-INDUSTRIALUSE_EYE_PROTECTIONSuitable eye protection might be recommended in the SDS by the formulator depending on the product.falsefalseUSE_EYE_PROTECTION-NOTRA-WORKER-RESPIRATORY-PROTECTIONfalsefalseTRA-WORKER-RESPIRATORY-PROTECTION_NOT_USED_VOTRA-WORKER-DERMAL-PROTECTIONfalseESCom-10133224896ESCom-12355002165trueTRA-WORKER-DERMAL-PROTECTION_PPE80TRA-WORKER-GENERAL_VENTILATIONfalsefalseTRA-WORKER-GENERAL_VENTILATION-BASICTRA-WORKER-LOCAL-EXHAUST-VENTILATIONfalsefalseTRA-WORKER-LOCAL-EXHAUST-VENTILATION-NO4/01/2021falseA.I.S.E. - SWED migration517c9e38-c41a-43c3-ab4c-0c58b7aaca612020-12-08T14:56:412020-12-08T14:56:41ACTIVE30/11/2020
<text>Professional uses; use in closed process</text>
AISE_SWED_PW_3_1Automated or semi-automated application of products in a closed process with occasional exposure.falseProfessional uses; use in closed process;PROC_3W_PERCENTAGE_OF_SUBSTANCE_IN_MIXTUREThe risk assessor using this SWED should indicate the maximum concentration for the relevant substance that can be used safely considering the conditions of use indicated in this SWED. In the Chesar file prepared by A.I.S.E. the default value for this field is set at 100%, unless manually modified by the risk assessor.falsetrue100.0W_PHYSICAL_FORM_OF_PRODUCTProduct ingredients mixed, diluted and/or suspendedfalsefalseW_PHYSICAL_FORM_OF_PRODUCT-LIQUIDDURATION_OF_ACTIVITYduring a whole shiftfalsetrue8.0TRA-WORKER-PLACE_OF_USEfalsetrueTRA-WORKER-INDOOROPERATING_TEMPERATURECovers use at ambient temperatures.falsetrue25.0TRA-WORKER-OCCUPATIONAL-HYGIENE-PRACTICEfalsefalseTRA-WORKER-OCCUPATIONAL-HYGIENE-PRACTICE-PROFESSIONALUSE_EYE_PROTECTIONSuitable eye protection might be recommended in the SDS by the formulator depending on the productfalsefalseUSE_EYE_PROTECTION-NOTRA-WORKER-RESPIRATORY-PROTECTIONfalsefalseTRA-WORKER-RESPIRATORY-PROTECTION_NOT_USED_VOTRA-WORKER-DERMAL-PROTECTIONfalsefalseTRA-WORKER-DERMAL-PROTECTION_NOTRA-WORKER-GENERAL_VENTILATIONfalsefalseTRA-WORKER-GENERAL_VENTILATION-BASICTRA-WORKER-LOCAL-EXHAUST-VENTILATIONfalsefalseTRA-WORKER-LOCAL-EXHAUST-VENTILATION-NOfalseA.I.S.E.IUC5-8da076c6-3275-4851-a726-2586b783a7e82021-01-06T08:59:132021-01-06T16:43:51ACTIVE4/01/2021
<text>Industrial uses; Treatment of articles by dipping or pouring; Level I</text>
AISE_SWED_IS_13_4Treatment of articles by dipping or pouring.
The product is used in a defined open processes.falseIndustrial uses; Treatment of articles by dipping or pouringPROC_13W_PERCENTAGE_OF_SUBSTANCE_IN_MIXTUREThe risk assessor using this SWED should indicate the maximum concentration for the relevant substance that can be used safely considering the conditions of use indicated in this SWED. In the Chesar file prepared by A.I.S.E. the default value for this field is set at 100%, unless manually modified by the risk assessor.falsetrue100.0W_PHYSICAL_FORM_OF_PRODUCTProduct ingredients mixed, diluted and/or suspendedfalsefalseW_PHYSICAL_FORM_OF_PRODUCT-LIQUIDDURATION_OF_ACTIVITYfalsetrue8.0TRA-WORKER-PLACE_OF_USEIndoors at industrial sitesfalsetrueTRA-WORKER-INDOOROPERATING_TEMPERATURECovers use at ambient temperatures.falsetrue25.0TRA-WORKER-OCCUPATIONAL-HYGIENE-PRACTICEfalsetrueTRA-WORKER-OCCUPATIONAL-HYGIENE-PRACTICE-INDUSTRIALUSE_EYE_PROTECTIONSuitable eye protection might be recommended in the SDS by the formulator depending on the product.falsefalseUSE_EYE_PROTECTION-NOTRA-WORKER-RESPIRATORY-PROTECTIONfalsefalseTRA-WORKER-RESPIRATORY-PROTECTION_NOT_USED_VOTRA-WORKER-DERMAL-PROTECTIONfalsefalseTRA-WORKER-DERMAL-PROTECTION_NOTRA-WORKER-GENERAL_VENTILATIONfalsefalseTRA-WORKER-GENERAL_VENTILATION-BASICTRA-WORKER-LOCAL-EXHAUST-VENTILATIONfalsefalseTRA-WORKER-LOCAL-EXHAUST-VENTILATION-NO4/01/2021falseA.I.S.E. - SWED migration517c9e38-c41a-43c3-ab4c-0c58b7aaca612020-12-08T14:54:522020-12-08T14:54:52ACTIVE30/11/2020
<text>Professional uses; Manual application; Level I</text>
AISE_SWED_PW_19_1Manual application of product.falseProfessional uses; Manual applicationPROC_19W_PERCENTAGE_OF_SUBSTANCE_IN_MIXTUREThe risk assessor using this SWED should indicate the maximum concentration for the relevant substance that can be used safely considering the conditions of use indicated in this SWED. In the Chesar file prepared by A.I.S.E. the default value for this field is set at 100%, unless manually modified by the risk assessor.falsetrue100.0W_PHYSICAL_FORM_OF_PRODUCTProduct ingredients mixed, diluted and/or suspendedfalsefalseW_PHYSICAL_FORM_OF_PRODUCT-LIQUIDDURATION_OF_ACTIVITYduring a whole shiftfalsetrue8.0TRA-WORKER-PLACE_OF_USEfalsetrueTRA-WORKER-INDOOROPERATING_TEMPERATURECovers use at ambient temperatures.falsetrue25.0TRA-WORKER-OCCUPATIONAL-HYGIENE-PRACTICEfalsefalseTRA-WORKER-OCCUPATIONAL-HYGIENE-PRACTICE-PROFESSIONALUSE_EYE_PROTECTIONSuitable eye protection might be recommended in the SDS by the formulator depending on the productfalsefalseUSE_EYE_PROTECTION-NOTRA-WORKER-RESPIRATORY-PROTECTIONfalsefalseTRA-WORKER-RESPIRATORY-PROTECTION_NOT_USED_VOTRA-WORKER-DERMAL-PROTECTIONfalsefalseTRA-WORKER-DERMAL-PROTECTION_NOTRA-WORKER-GENERAL_VENTILATIONfalsefalseTRA-WORKER-GENERAL_VENTILATION-BASICTRA-WORKER-LOCAL-EXHAUST-VENTILATIONfalsefalseTRA-WORKER-LOCAL-EXHAUST-VENTILATION-NOfalseA.I.S.E.IUC5-8da076c6-3275-4851-a726-2586b783a7e82021-01-06T09:40:252021-01-06T16:50:42ACTIVE4/01/2021
<text>Professional uses; (Trigger) spraying; Level II</text>
AISE_SWED_PW_11_2Spraying application of product.falseProfessional uses; (Trigger) sprayingPROC_11W_PERCENTAGE_OF_SUBSTANCE_IN_MIXTUREThe risk assessor using this SWED should indicate the maximum concentration for the relevant substance that can be used safely considering the conditions of use indicated in this SWED. In the Chesar file prepared by A.I.S.E. the default value for this field is set at 100%, unless manually modified by the risk assessor.falsetrue100.0W_PHYSICAL_FORM_OF_PRODUCTProduct ingredients mixed, diluted and/or suspendedfalsefalseW_PHYSICAL_FORM_OF_PRODUCT-LIQUIDDURATION_OF_ACTIVITYfalsetrue1.0TRA-WORKER-PLACE_OF_USEfalsetrueTRA-WORKER-INDOOROPERATING_TEMPERATURECovers use at ambient temperatures.falsetrue25.0TRA-WORKER-OCCUPATIONAL-HYGIENE-PRACTICEfalsefalseTRA-WORKER-OCCUPATIONAL-HYGIENE-PRACTICE-PROFESSIONALUSE_EYE_PROTECTIONSuitable eye protection might be recommended in the SDS by the formulator depending on the productfalsefalseUSE_EYE_PROTECTION-NOTRA-WORKER-RESPIRATORY-PROTECTIONfalsefalseTRA-WORKER-RESPIRATORY-PROTECTION_NOT_USED_VOTRA-WORKER-DERMAL-PROTECTIONfalseESCom-10133224896ESCom-12355002165trueTRA-WORKER-DERMAL-PROTECTION_PPE80TRA-WORKER-GENERAL_VENTILATIONfalsefalseTRA-WORKER-GENERAL_VENTILATION-BASICTRA-WORKER-LOCAL-EXHAUST-VENTILATIONfalsefalseTRA-WORKER-LOCAL-EXHAUST-VENTILATION-NO4/01/2021falseA.I.S.E.IUC5-8da076c6-3275-4851-a726-2586b783a7e82021-01-06T09:37:322021-01-06T16:50:22ACTIVE4/01/2021
<text>Professional uses; Brushing after trigger spraying or brushing with tools; Level II</text>
AISE_SWED_PW_10_2Brushing after trigger spraying or brushing with toolsfalseProfessional uses; Brushing after trigger spraying or brushing with toolsPROC_10W_PERCENTAGE_OF_SUBSTANCE_IN_MIXTUREThe risk assessor using this SWED should indicate the maximum concentration for the relevant substance that can be used safely considering the conditions of use indicated in this SWED. In the Chesar file prepared by A.I.S.E. the default value for this field is set at 100%, unless manually modified by the risk assessor.falsetrue100.0W_PHYSICAL_FORM_OF_PRODUCTProduct ingredients mixed, diluted and/or suspendedfalsefalseW_PHYSICAL_FORM_OF_PRODUCT-LIQUIDDURATION_OF_ACTIVITYduring a whole shiftfalsetrue8.0TRA-WORKER-PLACE_OF_USEfalsetrueTRA-WORKER-INDOOROPERATING_TEMPERATURECovers use at ambient temperatures.falsetrue25.0TRA-WORKER-OCCUPATIONAL-HYGIENE-PRACTICEfalsefalseTRA-WORKER-OCCUPATIONAL-HYGIENE-PRACTICE-PROFESSIONALUSE_EYE_PROTECTIONSuitable eye protection might be recommended in the SDS by the formulator depending on the productfalsefalseUSE_EYE_PROTECTION-NOTRA-WORKER-RESPIRATORY-PROTECTIONfalsefalseTRA-WORKER-RESPIRATORY-PROTECTION_NOT_USED_VOTRA-WORKER-DERMAL-PROTECTIONfalseESCom-10133224896ESCom-12355002165trueTRA-WORKER-DERMAL-PROTECTION_PPE80TRA-WORKER-GENERAL_VENTILATIONfalsefalseTRA-WORKER-GENERAL_VENTILATION-BASICTRA-WORKER-LOCAL-EXHAUST-VENTILATIONfalsefalseTRA-WORKER-LOCAL-EXHAUST-VENTILATION-NO4/01/2021falseA.I.S.E.IUC5-8da076c6-3275-4851-a726-2586b783a7e82021-01-06T09:47:192021-01-06T16:53:24ACTIVE4/01/2021
<text>Transfer of product to a container (bottle/bucket/machine); Level II</text>
AISE_SWED_PW_8a_1_SThe product is filled from large containers into a bottle, a bucket or a machine, without dedicated equipment and containment techniques in place.
It is a short process.falseTransfer of product to a container (bottle/bucket/machine)PROC_8aW_PERCENTAGE_OF_SUBSTANCE_IN_MIXTUREThe risk assessor using this SWED should indicate the maximum concentration for the relevant substance that can be used safely considering the conditions of use indicated in this SWED. In the Chesar file prepared by A.I.S.E. the default value for this field is set at 100%, unless manually modified by the risk assessor.falsetrue100.0W_PHYSICAL_FORM_OF_PRODUCTPowder. Transfer of powders from large container/ bag to pumping and dosing equipment.falsefalseW_PHYSICAL_FORM_OF_PRODUCT-SOLID_HIGHDURATION_OF_ACTIVITYThe contact time during filling is short. The dosing of products occurs automatically into dedicated systems or equipment.falsetrue1.0TRA-WORKER-PLACE_OF_USEfalsetrueTRA-WORKER-INDOOROPERATING_TEMPERATURECovers use at ambient temperatures.falsetrue25.0TRA-WORKER-OCCUPATIONAL-HYGIENE-PRACTICEfalsefalseTRA-WORKER-OCCUPATIONAL-HYGIENE-PRACTICE-PROFESSIONALUSE_EYE_PROTECTIONSuitable eye protection might be recommended in the SDS by the formulator depending on the product.falsefalseUSE_EYE_PROTECTION-NOTRA-WORKER-RESPIRATORY-PROTECTIONfalsefalseTRA-WORKER-RESPIRATORY-PROTECTION_NOT_USED_VOTRA-WORKER-DERMAL-PROTECTIONfalseESCom-10133224896ESCom-12355002165trueTRA-WORKER-DERMAL-PROTECTION_PPE80TRA-WORKER-GENERAL_VENTILATIONfalsefalseTRA-WORKER-GENERAL_VENTILATION-BASICTRA-WORKER-LOCAL-EXHAUST-VENTILATIONfalsefalseTRA-WORKER-LOCAL-EXHAUST-VENTILATION-NO4/01/2021falseA.I.S.E.IUC5-8da076c6-3275-4851-a726-2586b783a7e82021-01-06T09:04:102021-01-06T16:46:00ACTIVE4/01/2021
<text>Industrial uses; Automated task; Semi-automated task; Dedicated equipment; Level II</text>
AISE_SWED_IS_4_2Automated or semi-automated application of products in a semiclosed process.
Examples are the steps of product rinse in washing and disinfecting applications.falseIndustrial uses; Automated task; Semi-automated task; Dedicated equipmentPROC_4W_PERCENTAGE_OF_SUBSTANCE_IN_MIXTUREThe risk assessor using this SWED should indicate the maximum concentration for the relevant substance that can be used safely considering the conditions of use indicated in this SWED. In the Chesar file prepared by A.I.S.E. the default value for this field is set at 100%, unless manually modified by the risk assessor.falsetrue100.0W_PHYSICAL_FORM_OF_PRODUCTProduct ingredients mixed, diluted and/or suspendedfalsefalseW_PHYSICAL_FORM_OF_PRODUCT-LIQUIDDURATION_OF_ACTIVITYduring a whole shiftfalsetrue8.0TRA-WORKER-PLACE_OF_USESuitable eye protection might be recommended in the SDS by the formulator depending on the product.falsetrueTRA-WORKER-INDOOROPERATING_TEMPERATUREfalsetrue70.0TRA-WORKER-OCCUPATIONAL-HYGIENE-PRACTICEfalsetrueTRA-WORKER-OCCUPATIONAL-HYGIENE-PRACTICE-INDUSTRIALUSE_EYE_PROTECTIONSuitable eye protection might be recommended in the SDS by the formulator depending on the product.falsefalseUSE_EYE_PROTECTION-NOTRA-WORKER-RESPIRATORY-PROTECTIONfalsefalseTRA-WORKER-RESPIRATORY-PROTECTION_NOT_USED_VOTRA-WORKER-DERMAL-PROTECTIONfalseESCom-10133224896ESCom-12355002165trueTRA-WORKER-DERMAL-PROTECTION_PPE80TRA-WORKER-GENERAL_VENTILATIONfalsefalseTRA-WORKER-GENERAL_VENTILATION-BASICTRA-WORKER-LOCAL-EXHAUST-VENTILATIONfalsefalseTRA-WORKER-LOCAL-EXHAUST-VENTILATION-NO4/01/2021falseA.I.S.E. - SWED migration517c9e38-c41a-43c3-ab4c-0c58b7aaca612020-12-08T14:56:092020-12-08T14:56:09ACTIVE30/11/2020
<text>Professional uses; use in closed process</text>
AISE_SWED_PW_1_1Application of the product is highly automated. Cleaning in place within highly enclosed production equipment.trueCleaning in place within highly enclosed production equipmentProfessional uses; use in closed processPROC_1W_PERCENTAGE_OF_SUBSTANCE_IN_MIXTUREThe risk assessor using this SWED should indicate the maximum concentration for the relevant substance that can be used safely considering the conditions of use indicated in this SWED. In the Chesar file prepared by A.I.S.E. the default value for this field is set at 100%, unless manually modified by the risk assessor.falsetrue100.0W_PHYSICAL_FORM_OF_PRODUCTProduct ingredients mixed, diluted and/or suspendedfalsefalseW_PHYSICAL_FORM_OF_PRODUCT-LIQUIDDURATION_OF_ACTIVITYduring a whole shiftfalsetrue8.0TRA-WORKER-PLACE_OF_USEfalsetrueTRA-WORKER-INDOOROPERATING_TEMPERATURECovers use at ambient temperatures.falsetrue25.0TRA-WORKER-OCCUPATIONAL-HYGIENE-PRACTICEfalsefalseTRA-WORKER-OCCUPATIONAL-HYGIENE-PRACTICE-PROFESSIONALUSE_EYE_PROTECTIONSuitable eye protection might be recommended in the SDS by the formulator depending on the productfalsefalseUSE_EYE_PROTECTION-NOTRA-WORKER-RESPIRATORY-PROTECTIONfalsefalseTRA-WORKER-RESPIRATORY-PROTECTION_NOT_USED_VOTRA-WORKER-DERMAL-PROTECTIONfalsefalseTRA-WORKER-DERMAL-PROTECTION_NOTRA-WORKER-GENERAL_VENTILATIONfalsefalseTRA-WORKER-GENERAL_VENTILATION-BASICTRA-WORKER-LOCAL-EXHAUST-VENTILATIONfalsefalseTRA-WORKER-LOCAL-EXHAUST-VENTILATION-NOfalseA.I.S.E.IUC5-8da076c6-3275-4851-a726-2586b783a7e82021-01-06T09:46:352021-01-06T16:52:56ACTIVE4/01/2021
<text>Transfer of product to a container (bottle/bucket/machine); Level II</text>
AISE_SWED_PW_8a_1_LThe product is filled from large containers into a bottle, a bucket or a machine, without dedicated equipment and containment techniques in place.
It is a short process.falseTransfer of product to a container (bottle/bucket/machine)PROC_8aW_PERCENTAGE_OF_SUBSTANCE_IN_MIXTUREThe risk assessor using this SWED should indicate the maximum concentration for the relevant substance that can be used safely considering the conditions of use indicated in this SWED. In the Chesar file prepared by A.I.S.E. the default value for this field is set at 100%, unless manually modified by the risk assessor.falsetrue100.0W_PHYSICAL_FORM_OF_PRODUCTTransfer of liquid from large container/ bag to pumping and dosing equipment.falsefalseW_PHYSICAL_FORM_OF_PRODUCT-LIQUIDDURATION_OF_ACTIVITYThe contact time during filling is short. The dosing of products occurs automatically into dedicated systems or equipment.falsetrue1.0TRA-WORKER-PLACE_OF_USEfalsetrueTRA-WORKER-INDOOROPERATING_TEMPERATURECovers use at ambient temperatures.falsetrue25.0TRA-WORKER-OCCUPATIONAL-HYGIENE-PRACTICEfalsefalseTRA-WORKER-OCCUPATIONAL-HYGIENE-PRACTICE-PROFESSIONALUSE_EYE_PROTECTIONSuitable eye protection might be recommended in the SDS by the formulator depending on the product.falsefalseUSE_EYE_PROTECTION-NOTRA-WORKER-RESPIRATORY-PROTECTIONfalsefalseTRA-WORKER-RESPIRATORY-PROTECTION_NOT_USED_VOTRA-WORKER-DERMAL-PROTECTIONfalseESCom-10133224896ESCom-12355002165trueTRA-WORKER-DERMAL-PROTECTION_PPE80TRA-WORKER-GENERAL_VENTILATIONfalsefalseTRA-WORKER-GENERAL_VENTILATION-BASICTRA-WORKER-LOCAL-EXHAUST-VENTILATIONfalsefalseTRA-WORKER-LOCAL-EXHAUST-VENTILATION-NO4/01/2021falseA.I.S.E.IUC5-8da076c6-3275-4851-a726-2586b783a7e82021-01-06T09:13:022021-01-06T16:46:56ACTIVE4/01/2021
<text>Industrial spraying; Automated task; Open system; Long term; Level III</text>
AISE_SWED_IS_7_2The product is pumped and sprayed under low pressure with lances onto the surface.
The spray application can be followed by a brushing wiping operation, where the residual dirt is removed with a brush or towel or similar tool.falseIndustrial spraying; Automated task; Open system; Long termPROC_7W_PERCENTAGE_OF_SUBSTANCE_IN_MIXTUREThe risk assessor using this SWED should indicate the maximum concentration for the relevant substance that can be used safely considering the conditions of use indicated in this SWED. In the Chesar file prepared by A.I.S.E. the default value for this field is set at 100%, unless manually modified by the risk assessor.falsetrue100.0W_PHYSICAL_FORM_OF_PRODUCTProduct ingredients mixed, diluted and/or suspendedfalsefalseW_PHYSICAL_FORM_OF_PRODUCT-LIQUIDDURATION_OF_ACTIVITYduring a whole shiftfalsetrue4.0TRA-WORKER-PLACE_OF_USEindoors at industrial sitesfalsetrueTRA-WORKER-INDOOROPERATING_TEMPERATURECovers use at ambient temperatures.falsetrue25.0TRA-WORKER-OCCUPATIONAL-HYGIENE-PRACTICEfalsetrueTRA-WORKER-OCCUPATIONAL-HYGIENE-PRACTICE-INDUSTRIALUSE_EYE_PROTECTIONSuitable eye protection might be recommended in the SDS by the formulator depending on the product.falsefalseUSE_EYE_PROTECTION-NOTRA-WORKER-RESPIRATORY-PROTECTIONfalsetrueTRA-WORKER-RESPIRATORY-PROTECTION_RP90TRA-WORKER-DERMAL-PROTECTIONfalseESCom-10133224896ESCom-12355002165trueTRA-WORKER-DERMAL-PROTECTION_PPE80TRA-WORKER-GENERAL_VENTILATIONfalsefalseTRA-WORKER-GENERAL_VENTILATION-BASICTRA-WORKER-LOCAL-EXHAUST-VENTILATIONfalsefalseTRA-WORKER-LOCAL-EXHAUST-VENTILATION-NO4/01/2021falseA.I.S.E.IUC5-8da076c6-3275-4851-a726-2586b783a7e82021-10-19T13:51:462021-11-30T11:47:06ACTIVE
<text>Transfer of product via a dedicated system (bottle/bucket/machine)</text>
AISE_SWED_PW_8b_2The product is filled from large containers into a bottle, a bucket or a machine, with dedicated equipment and containment techniques in place.falsePROC_8bW_PERCENTAGE_OF_SUBSTANCE_IN_MIXTUREfalsetrue100.0W_PHYSICAL_FORM_OF_PRODUCTfalsetrueW_PHYSICAL_FORM_OF_PRODUCT-LIQUIDDURATION_OF_ACTIVITYfalsetrue1.0TRA-WORKER-PLACE_OF_USEfalsetrueTRA-WORKER-INDOOROPERATING_TEMPERATUREfalsetrue25.0TRA-WORKER-OCCUPATIONAL-HYGIENE-PRACTICEfalsefalseTRA-WORKER-OCCUPATIONAL-HYGIENE-PRACTICE-PROFESSIONALTRA-WORKER-GENERAL_VENTILATIONfalsefalseTRA-WORKER-GENERAL_VENTILATION-BASICTRA-WORKER-LOCAL-EXHAUST-VENTILATIONfalsefalseTRA-WORKER-LOCAL-EXHAUST-VENTILATION-NOTRA-WORKER-RESPIRATORY-PROTECTIONfalsefalseTRA-WORKER-RESPIRATORY-PROTECTION_NOT_USED_VOTRA-WORKER-DERMAL-PROTECTIONfalsetrueTRA-WORKER-DERMAL-PROTECTION_PPE80USE_EYE_PROTECTIONfalsefalseUSE_EYE_PROTECTION-NOOct 2021falseA.I.S.E.IUC5-8da076c6-3275-4851-a726-2586b783a7e82021-01-06T09:14:132021-01-06T16:47:28ACTIVE4/01/2021
<text>Industrial spraying; Automated task; Open system; Short term; Level II</text>
AISE_SWED_IS_7_3The product is pumped and sprayed under low pressure with lances onto the surface.
The spray application can be followed by a brushing wiping operation, where the residual dirt is removed with a brush or towel or similar tool.falseIndustrial spraying; Automated task; Open system; Short termPROC_7W_PERCENTAGE_OF_SUBSTANCE_IN_MIXTUREThe risk assessor using this SWED should indicate the maximum concentration for the relevant substance that can be used safely considering the conditions of use indicated in this SWED. In the Chesar file prepared by A.I.S.E. the default value for this field is set at 100%, unless manually modified by the risk assessor.falsetrue100.0W_PHYSICAL_FORM_OF_PRODUCTProduct ingredients mixed, diluted and/or suspendedfalsefalseW_PHYSICAL_FORM_OF_PRODUCT-LIQUIDDURATION_OF_ACTIVITYfalsetrue1.0TRA-WORKER-PLACE_OF_USEindoors at industrial sitesfalsetrueTRA-WORKER-INDOOROPERATING_TEMPERATURECovers use at ambient temperatures.falsetrue25.0TRA-WORKER-OCCUPATIONAL-HYGIENE-PRACTICEfalsetrueTRA-WORKER-OCCUPATIONAL-HYGIENE-PRACTICE-INDUSTRIALUSE_EYE_PROTECTIONSuitable eye protection might be recommended in the SDS by the formulator depending on the product.falsefalseUSE_EYE_PROTECTION-NOTRA-WORKER-RESPIRATORY-PROTECTIONfalsefalseTRA-WORKER-RESPIRATORY-PROTECTION_NOT_USED_VOTRA-WORKER-DERMAL-PROTECTIONfalseESCom-10133224896ESCom-12355002165trueTRA-WORKER-DERMAL-PROTECTION_PPE80TRA-WORKER-GENERAL_VENTILATIONfalsefalseTRA-WORKER-GENERAL_VENTILATION-BASICTRA-WORKER-LOCAL-EXHAUST-VENTILATIONfalsefalseTRA-WORKER-LOCAL-EXHAUST-VENTILATION-NO4/01/2021falseA.I.S.E.IUC5-8da076c6-3275-4851-a726-2586b783a7e82021-01-06T09:30:032021-01-06T16:48:28ACTIVE4/01/2021
<text>Transfer and dilution of concentrated product by using dedicated dosing system; Level II</text>
AISE_SWED_IS_8b_1_LThe product is filled from large containers into a machine or a vessel.
Filling means to link and delink a tube with the container.
It is a short process.falseTransfer and dilution of concentrated product by using dedicated dosing systemPROC_8bW_PERCENTAGE_OF_SUBSTANCE_IN_MIXTUREThe risk assessor using this SWED should indicate the maximum concentration for the relevant substance that can be used safely considering the conditions of use indicated in this SWED. In the Chesar file prepared by A.I.S.E. the default value for this field is set at 100%, unless manually modified by the risk assessor.falsetrue100.0W_PHYSICAL_FORM_OF_PRODUCTAutomatic transfer of liquid from large container/ bag to pumping and dosing equipment.falsefalseW_PHYSICAL_FORM_OF_PRODUCT-LIQUIDDURATION_OF_ACTIVITYThe contact time during filling is short. The dosing of products occurs automatically into dedicated systems or equipment.falsetrue1.0TRA-WORKER-PLACE_OF_USEfalsetrueTRA-WORKER-INDOOROPERATING_TEMPERATURECovers use at ambient temperatures.falsetrue25.0TRA-WORKER-OCCUPATIONAL-HYGIENE-PRACTICEfalsetrueTRA-WORKER-OCCUPATIONAL-HYGIENE-PRACTICE-INDUSTRIALUSE_EYE_PROTECTIONSuitable eye protection might be recommended in the SDS by the formulator depending on the product.falsefalseUSE_EYE_PROTECTION-NOTRA-WORKER-RESPIRATORY-PROTECTIONfalsefalseTRA-WORKER-RESPIRATORY-PROTECTION_NOT_USED_VOTRA-WORKER-DERMAL-PROTECTIONfalseESCom-10133224896ESCom-12355002165trueTRA-WORKER-DERMAL-PROTECTION_PPE80TRA-WORKER-GENERAL_VENTILATIONfalsefalseTRA-WORKER-GENERAL_VENTILATION-BASICTRA-WORKER-LOCAL-EXHAUST-VENTILATIONfalsefalseTRA-WORKER-LOCAL-EXHAUST-VENTILATION-NO4/01/2021falseA.I.S.E. - SWED migration517c9e38-c41a-43c3-ab4c-0c58b7aaca612020-12-08T14:44:482020-12-08T14:44:48ACTIVE30/11/2020
<text>Industrial spraying; Automated task; Open system; Long term; Level I</text>
AISE_SWED_IS_7_5The product is pumped and sprayed under low pressure with lances onto the surface.
The spray application can be followed by a brushing wiping operation, where the residual dirt is removed with a brush or towel or similar tool.falseIndustrial spraying; Automated task; Open system; Long termPROC_7W_PERCENTAGE_OF_SUBSTANCE_IN_MIXTUREThe risk assessor using this SWED should indicate the maximum concentration for the relevant substance that can be used safely considering the conditions of use indicated in this SWED. In the Chesar file prepared by A.I.S.E. the default value for this field is set at 100%, unless manually modified by the risk assessor.falsetrue100.0W_PHYSICAL_FORM_OF_PRODUCTProduct ingredients mixed, diluted and/or suspendedfalsefalseW_PHYSICAL_FORM_OF_PRODUCT-LIQUIDDURATION_OF_ACTIVITYduring a whole shiftfalsetrue8.0TRA-WORKER-PLACE_OF_USEindoors at industrial sitesfalsetrueTRA-WORKER-INDOOROPERATING_TEMPERATURECovers use at ambient temperatures.falsetrue25.0TRA-WORKER-OCCUPATIONAL-HYGIENE-PRACTICEfalsetrueTRA-WORKER-OCCUPATIONAL-HYGIENE-PRACTICE-INDUSTRIALUSE_EYE_PROTECTIONSuitable eye protection might be recommended in the SDS by the formulator depending on the product.falsefalseUSE_EYE_PROTECTION-NOTRA-WORKER-RESPIRATORY-PROTECTIONfalsefalseTRA-WORKER-RESPIRATORY-PROTECTION_NOT_USED_VOTRA-WORKER-DERMAL-PROTECTIONfalsefalseTRA-WORKER-DERMAL-PROTECTION_NOTRA-WORKER-GENERAL_VENTILATIONfalsefalseTRA-WORKER-GENERAL_VENTILATION-BASICTRA-WORKER-LOCAL-EXHAUST-VENTILATIONfalsefalseTRA-WORKER-LOCAL-EXHAUST-VENTILATION-NOfalseA.I.S.E. - SWED migration517c9e38-c41a-43c3-ab4c-0c58b7aaca612020-12-08T15:00:092020-12-08T15:00:09ACTIVE30/11/2020
<text>Transfer of product via a dedicated system (bottle/machine); Level I</text>
AISE_SWED_PW_8a_2_LThe product is filled from large containers into a bottle, a bucket or a machine, without dedicated equipment and containment techniques in place.
It is a short process.falseTransfer of product via a dedicated system (bottle/machine)PROC_8aW_PERCENTAGE_OF_SUBSTANCE_IN_MIXTUREThe risk assessor using this SWED should indicate the maximum concentration for the relevant substance that can be used safely considering the conditions of use indicated in this SWED. In the Chesar file prepared by A.I.S.E. the default value for this field is set at 100%, unless manually modified by the risk assessor.falsetrue100.0W_PHYSICAL_FORM_OF_PRODUCTTransfer of liquid from large container/ bag to pumping and dosing equipment.falsefalseW_PHYSICAL_FORM_OF_PRODUCT-LIQUIDDURATION_OF_ACTIVITYThe contact time during filling is short. The dosing of products occurs automatically into dedicated systems or equipment.falsetrue1.0TRA-WORKER-PLACE_OF_USEfalsetrueTRA-WORKER-INDOOROPERATING_TEMPERATURECovers use at ambient temperatures.falsetrue25.0TRA-WORKER-OCCUPATIONAL-HYGIENE-PRACTICEfalsefalseTRA-WORKER-OCCUPATIONAL-HYGIENE-PRACTICE-PROFESSIONALUSE_EYE_PROTECTIONSuitable eye protection might be recommended in the SDS by the formulator depending on the product.falsefalseUSE_EYE_PROTECTION-NOTRA-WORKER-RESPIRATORY-PROTECTIONfalsefalseTRA-WORKER-RESPIRATORY-PROTECTION_NOT_USED_VOTRA-WORKER-DERMAL-PROTECTIONfalsefalseTRA-WORKER-DERMAL-PROTECTION_NOTRA-WORKER-GENERAL_VENTILATIONfalsefalseTRA-WORKER-GENERAL_VENTILATION-BASICTRA-WORKER-LOCAL-EXHAUST-VENTILATIONfalsefalseTRA-WORKER-LOCAL-EXHAUST-VENTILATION-NOfalseA.I.S.E.IUC5-8da076c6-3275-4851-a726-2586b783a7e82021-01-06T09:01:072021-01-06T16:44:43ACTIVE4/01/2021
<text>Equipment maintenance</text>
AISE_SWED_IS_28_1Semi-automatic or manual maintanence of equipment.
Application of product in a defined process.falseEquipment maintenance;PROC_28W_PERCENTAGE_OF_SUBSTANCE_IN_MIXTUREThe risk assessor using this SWED should indicate the maximum concentration for the relevant substance that can be used safely considering the conditions of use indicated in this SWED. In the Chesar file prepared by A.I.S.E. the default value for this field is set at 100%, unless manually modified by the risk assessor.falsetrue100.0W_PHYSICAL_FORM_OF_PRODUCTProduct ingredients mixed, diluted and/or suspendedfalsefalseW_PHYSICAL_FORM_OF_PRODUCT-LIQUIDDURATION_OF_ACTIVITYfalsetrue1.0TRA-WORKER-PLACE_OF_USEIndoors at industrial sitesfalsetrueTRA-WORKER-INDOOROPERATING_TEMPERATURECovers use at ambient temperatures.falsetrue25.0TRA-WORKER-OCCUPATIONAL-HYGIENE-PRACTICEfalsetrueTRA-WORKER-OCCUPATIONAL-HYGIENE-PRACTICE-INDUSTRIALUSE_EYE_PROTECTIONSuitable eye protection might be recommended in the SDS by the formulator depending on the product.falsefalseUSE_EYE_PROTECTION-NOTRA-WORKER-RESPIRATORY-PROTECTIONfalsefalseTRA-WORKER-RESPIRATORY-PROTECTION_NOT_USED_VOTRA-WORKER-DERMAL-PROTECTIONfalseESCom-10133224896ESCom-12355002165trueTRA-WORKER-DERMAL-PROTECTION_PPE80TRA-WORKER-GENERAL_VENTILATIONfalsefalseTRA-WORKER-GENERAL_VENTILATION-BASICTRA-WORKER-LOCAL-EXHAUST-VENTILATIONfalsefalseTRA-WORKER-LOCAL-EXHAUST-VENTILATION-NO4/01/2021falseA.I.S.E. - SWED migration517c9e38-c41a-43c3-ab4c-0c58b7aaca612020-12-08T14:57:212020-12-08T14:57:21ACTIVE30/11/2020
<text>Professional uses; Semi-closed system</text>
AISE_SWED_PW_4_1Automated or semi-automated application of products in a semiclosed process.falseProfessional uses; Semi-closed systemPROC_4W_PERCENTAGE_OF_SUBSTANCE_IN_MIXTUREThe risk assessor using this SWED should indicate the maximum concentration for the relevant substance that can be used safely considering the conditions of use indicated in this SWED. In the Chesar file prepared by A.I.S.E. the default value for this field is set at 100%, unless manually modified by the risk assessor.falsetrue100.0W_PHYSICAL_FORM_OF_PRODUCTProduct ingredients mixed, diluted and/or suspendedfalsefalseW_PHYSICAL_FORM_OF_PRODUCT-LIQUIDDURATION_OF_ACTIVITYduring a whole shiftfalsetrue8.0TRA-WORKER-PLACE_OF_USEfalsetrueTRA-WORKER-INDOOROPERATING_TEMPERATURECovers use at ambient temperatures.falsetrue25.0TRA-WORKER-OCCUPATIONAL-HYGIENE-PRACTICEfalsefalseTRA-WORKER-OCCUPATIONAL-HYGIENE-PRACTICE-PROFESSIONALUSE_EYE_PROTECTIONSuitable eye protection might be recommended in the SDS by the formulator depending on the productfalsefalseUSE_EYE_PROTECTION-NOTRA-WORKER-RESPIRATORY-PROTECTIONfalsefalseTRA-WORKER-RESPIRATORY-PROTECTION_NOT_USED_VOTRA-WORKER-DERMAL-PROTECTIONfalsefalseTRA-WORKER-DERMAL-PROTECTION_NOTRA-WORKER-GENERAL_VENTILATIONfalsefalseTRA-WORKER-GENERAL_VENTILATION-BASICTRA-WORKER-LOCAL-EXHAUST-VENTILATIONfalsefalseTRA-WORKER-LOCAL-EXHAUST-VENTILATION-NOfalseA.I.S.E. - SWED migration517c9e38-c41a-43c3-ab4c-0c58b7aaca612020-12-08T14:52:012020-12-08T14:52:01ACTIVE30/11/2020
<text>Professional uses; Spraying; Level I</text>
AISE_SWED_PW_11_4Spraying application of product.falseProfessional uses; SprayingPROC_11W_PERCENTAGE_OF_SUBSTANCE_IN_MIXTUREThe risk assessor using this SWED should indicate the maximum concentration for the relevant substance that can be used safely considering the conditions of use indicated in this SWED. In the Chesar file prepared by A.I.S.E. the default value for this field is set at 100%, unless manually modified by the risk assessor.falsetrue100.0W_PHYSICAL_FORM_OF_PRODUCTProduct ingredients mixed, diluted and/or suspendedfalsefalseW_PHYSICAL_FORM_OF_PRODUCT-LIQUIDDURATION_OF_ACTIVITYduring a whole shiftfalsetrue8.0TRA-WORKER-PLACE_OF_USEfalsetrueTRA-WORKER-INDOOROPERATING_TEMPERATURECovers use at ambient temperatures.falsetrue25.0TRA-WORKER-OCCUPATIONAL-HYGIENE-PRACTICEfalsefalseTRA-WORKER-OCCUPATIONAL-HYGIENE-PRACTICE-PROFESSIONALUSE_EYE_PROTECTIONSuitable eye protection might be recommended in the SDS by the formulator depending on the productfalsefalseUSE_EYE_PROTECTION-NOTRA-WORKER-RESPIRATORY-PROTECTIONfalsefalseTRA-WORKER-RESPIRATORY-PROTECTION_NOT_USED_VOTRA-WORKER-DERMAL-PROTECTIONfalsefalseTRA-WORKER-DERMAL-PROTECTION_NOTRA-WORKER-GENERAL_VENTILATIONfalsefalseTRA-WORKER-GENERAL_VENTILATION-BASICTRA-WORKER-LOCAL-EXHAUST-VENTILATIONfalsefalseTRA-WORKER-LOCAL-EXHAUST-VENTILATION-NOfalseA.I.S.E.IUC5-8da076c6-3275-4851-a726-2586b783a7e82021-01-06T09:11:152021-01-06T16:46:31ACTIVE4/01/2021
<text>Industrial spraying; Automated task; Open systems; Long term; Level IV (LEV)</text>
AISE_SWED_IS_7_1The product is pumped and sprayed under low pressure with lances onto the surface.
The spray application can be followed by a brushing wiping operation, where the residual dirt is removed with a brush or towel or similar tool.
The application takes place in a dedicated area, e.g. spraying cabinet.falseIndustrial spraying; Automated task; Open systems; Long termPROC_7W_PERCENTAGE_OF_SUBSTANCE_IN_MIXTUREThe risk assessor using this SWED should indicate the maximum concentration for the relevant substance that can be used safely considering the conditions of use indicated in this SWED. In the Chesar file prepared by A.I.S.E. the default value for this field is set at 100%, unless manually modified by the risk assessor.falsetrue100.0W_PHYSICAL_FORM_OF_PRODUCTProduct ingredients mixed, diluted and/or suspendedfalsefalseW_PHYSICAL_FORM_OF_PRODUCT-LIQUIDDURATION_OF_ACTIVITYduring a whole shiftfalsetrue8.0TRA-WORKER-PLACE_OF_USEindoors at industrial sitesfalsetrueTRA-WORKER-INDOOROPERATING_TEMPERATURECovers use at ambient temperatures.falsetrue25.0TRA-WORKER-OCCUPATIONAL-HYGIENE-PRACTICEfalsetrueTRA-WORKER-OCCUPATIONAL-HYGIENE-PRACTICE-INDUSTRIALUSE_EYE_PROTECTIONSuitable eye protection might be recommended in the SDS by the formulator depending on the product.falsefalseUSE_EYE_PROTECTION-NOTRA-WORKER-RESPIRATORY-PROTECTIONfalsefalseTRA-WORKER-RESPIRATORY-PROTECTION_NOT_USED_VOTRA-WORKER-DERMAL-PROTECTIONfalseESCom-10133224896ESCom-12355002165trueTRA-WORKER-DERMAL-PROTECTION_PPE80TRA-WORKER-GENERAL_VENTILATIONfalsefalseTRA-WORKER-GENERAL_VENTILATION-BASICTRA-WORKER-LOCAL-EXHAUST-VENTILATIONfalsetrueTRA-WORKER-LOCAL-EXHAUST-VENTILATION_FIXED_HOOD4/01/2021falseA.I.S.E.IUC5-8da076c6-3275-4851-a726-2586b783a7e82021-01-06T09:31:332021-01-06T16:48:53ACTIVE4/01/2021
<text>Transfer and dilution of concentrated product by using dedicated dosing system; Level II</text>
AISE_SWED_IS_8b_1_SThe product is filled from large containers into a machine or a vessel.
Filling means to link and delink a tube with the container.
It is a short process.falseTransfer and dilution of concentrated product by using dedicated dosing systemPROC_8bW_PERCENTAGE_OF_SUBSTANCE_IN_MIXTUREThe risk assessor using this SWED should indicate the maximum concentration for the relevant substance that can be used safely considering the conditions of use indicated in this SWED. In the Chesar file prepared by A.I.S.E. the default value for this field is set at 100%, unless manually modified by the risk assessor.falsetrue100.0W_PHYSICAL_FORM_OF_PRODUCTPowder. Automatic transfer of powders from large container/ bag to pumping and dosing equipment.falsefalseW_PHYSICAL_FORM_OF_PRODUCT-SOLID_HIGHDURATION_OF_ACTIVITYThe contact time during filling is short. The dosing of products occurs automatically into dedicated systems or equipment.falsetrue1.0TRA-WORKER-PLACE_OF_USEfalsetrueTRA-WORKER-INDOOROPERATING_TEMPERATUREfalsetrue25.0TRA-WORKER-OCCUPATIONAL-HYGIENE-PRACTICEfalsetrueTRA-WORKER-OCCUPATIONAL-HYGIENE-PRACTICE-INDUSTRIALUSE_EYE_PROTECTIONSuitable eye protection might be recommended in the SDS by the formulator depending on the product.falsefalseUSE_EYE_PROTECTION-NOTRA-WORKER-RESPIRATORY-PROTECTIONfalsefalseTRA-WORKER-RESPIRATORY-PROTECTION_NOT_USED_VOTRA-WORKER-DERMAL-PROTECTIONfalseESCom-10133224896ESCom-12355002165trueTRA-WORKER-DERMAL-PROTECTION_PPE80TRA-WORKER-GENERAL_VENTILATIONfalsefalseTRA-WORKER-GENERAL_VENTILATION-BASICTRA-WORKER-LOCAL-EXHAUST-VENTILATIONfalsefalseTRA-WORKER-LOCAL-EXHAUST-VENTILATION-NO4/01/2021falseA.I.S.E.IUC5-8da076c6-3275-4851-a726-2586b783a7e82021-01-06T08:54:312021-01-06T16:42:42ACTIVE4/01/2021
<text>Industrial uses; Treatment of articles by dipping or pouring; Level IV (LEV)</text>
AISE_SWED_IS_13_1Treatment of articles by dipping or pouring.
The application takes place in a dedicated area.falseIndustrial uses; Treatment of articles by dipping or pouringPROC_13W_PERCENTAGE_OF_SUBSTANCE_IN_MIXTUREThe risk assessor using this SWED should indicate the maximum concentration for the relevant substance that can be used safely considering the conditions of use indicated in this SWED. In the Chesar file prepared by A.I.S.E. the default value for this field is set at 100%, unless manually modified by the risk assessor.falsetrue100.0W_PHYSICAL_FORM_OF_PRODUCTProduct ingredients mixed, diluted and/or suspendedfalsefalseW_PHYSICAL_FORM_OF_PRODUCT-LIQUIDDURATION_OF_ACTIVITYfalsetrue8.0TRA-WORKER-PLACE_OF_USEIndoors at industrial sitesfalsetrueTRA-WORKER-INDOOROPERATING_TEMPERATURECovers use at ambient temperatures.falsetrue25.0TRA-WORKER-OCCUPATIONAL-HYGIENE-PRACTICEfalsetrueTRA-WORKER-OCCUPATIONAL-HYGIENE-PRACTICE-INDUSTRIALUSE_EYE_PROTECTIONSuitable eye protection might be recommended in the SDS by the formulator depending on the product.falsefalseUSE_EYE_PROTECTION-NOTRA-WORKER-RESPIRATORY-PROTECTIONfalsefalseTRA-WORKER-RESPIRATORY-PROTECTION_NOT_USED_VOTRA-WORKER-DERMAL-PROTECTIONfalseESCom-10133224896ESCom-12355002165trueTRA-WORKER-DERMAL-PROTECTION_PPE80TRA-WORKER-GENERAL_VENTILATIONfalsefalseTRA-WORKER-GENERAL_VENTILATION-BASICTRA-WORKER-LOCAL-EXHAUST-VENTILATIONfalsetrueTRA-WORKER-LOCAL-EXHAUST-VENTILATION_HOODS4/01/2021falseA.I.S.E.IUC5-8da076c6-3275-4851-a726-2586b783a7e82021-01-06T08:55:512021-01-06T16:43:03ACTIVE4/01/2021
<text>Industrial uses; Treatment of articles by dipping or pouring; Level III</text>
AISE_SWED_IS_13_2Treatment of articles by dipping or pouring.
The product is used in a defined open processes.falseIndustrial uses; Treatment of articles by dipping or pouringPROC_13W_PERCENTAGE_OF_SUBSTANCE_IN_MIXTUREThe risk assessor using this SWED should indicate the maximum concentration for the relevant substance that can be used safely considering the conditions of use indicated in this SWED. In the Chesar file prepared by A.I.S.E. the default value for this field is set at 100%, unless manually modified by the risk assessor.falsetrue100.0W_PHYSICAL_FORM_OF_PRODUCTProduct ingredients mixed, diluted and/or suspendedfalsefalseW_PHYSICAL_FORM_OF_PRODUCT-LIQUIDDURATION_OF_ACTIVITYfalsetrue4.0TRA-WORKER-PLACE_OF_USEIndoors at industrial sitesfalsetrueTRA-WORKER-INDOOROPERATING_TEMPERATURECovers use at ambient temperatures.falsetrue25.0TRA-WORKER-OCCUPATIONAL-HYGIENE-PRACTICEfalsetrueTRA-WORKER-OCCUPATIONAL-HYGIENE-PRACTICE-INDUSTRIALUSE_EYE_PROTECTIONSuitable eye protection might be recommended in the SDS by the formulator depending on the product.falsefalseUSE_EYE_PROTECTION-NOTRA-WORKER-RESPIRATORY-PROTECTIONfalsetrueTRA-WORKER-RESPIRATORY-PROTECTION_RP90TRA-WORKER-DERMAL-PROTECTIONfalseESCom-10133224896ESCom-12355002165trueTRA-WORKER-DERMAL-PROTECTION_PPE80TRA-WORKER-GENERAL_VENTILATIONfalsefalseTRA-WORKER-GENERAL_VENTILATION-BASICTRA-WORKER-LOCAL-EXHAUST-VENTILATIONfalsefalseTRA-WORKER-LOCAL-EXHAUST-VENTILATION-NO4/01/2021falseA.I.S.E.IUC5-8da076c6-3275-4851-a726-2586b783a7e82021-01-06T09:43:322021-01-06T16:51:30ACTIVE4/01/2021
<text>Professional uses; Treatment of articles by dipping, soaking or pouring; Level II</text>
AISE_SWED_PW_13_1Treatment of articles by dipping or pouring.falseProfessional uses; Treatment of articles by dipping, soaking or pouringPROC_13W_PERCENTAGE_OF_SUBSTANCE_IN_MIXTUREThe risk assessor using this SWED should indicate the maximum concentration for the relevant substance that can be used safely considering the conditions of use indicated in this SWED. In the Chesar file prepared by A.I.S.E. the default value for this field is set at 100%, unless manually modified by the risk assessor.falsetrue100.0W_PHYSICAL_FORM_OF_PRODUCTProduct ingredients mixed, diluted and/or suspendedfalsefalseW_PHYSICAL_FORM_OF_PRODUCT-LIQUIDDURATION_OF_ACTIVITYfalsetrue1.0TRA-WORKER-PLACE_OF_USEfalsetrueTRA-WORKER-INDOOROPERATING_TEMPERATURECovers use at ambient temperatures.falsetrue25.0TRA-WORKER-OCCUPATIONAL-HYGIENE-PRACTICEfalsefalseTRA-WORKER-OCCUPATIONAL-HYGIENE-PRACTICE-PROFESSIONALUSE_EYE_PROTECTIONSuitable eye protection might be recommended in the SDS by the formulator depending on the productfalsefalseUSE_EYE_PROTECTION-NOTRA-WORKER-RESPIRATORY-PROTECTIONfalsefalseTRA-WORKER-RESPIRATORY-PROTECTION_NOT_USED_VOTRA-WORKER-DERMAL-PROTECTIONfalseESCom-10133224896ESCom-12355002165trueTRA-WORKER-DERMAL-PROTECTION_PPE80TRA-WORKER-GENERAL_VENTILATIONfalsefalseTRA-WORKER-GENERAL_VENTILATION-BASICTRA-WORKER-LOCAL-EXHAUST-VENTILATIONfalsefalseTRA-WORKER-LOCAL-EXHAUST-VENTILATION-NO4/01/2021falseA.I.S.E.IUC5-8da076c6-3275-4851-a726-2586b783a7e82021-01-06T08:57:532021-01-06T16:43:25ACTIVE4/01/2021
<text>Industrial uses; Treatment of articles by dipping or pouring; Level II</text>
AISE_SWED_IS_13_3Treatment of articles by dipping or pouring.
The product is used in a defined open processes.falseIndustrial uses; Treatment of articles by dipping or pouringPROC_13W_PERCENTAGE_OF_SUBSTANCE_IN_MIXTUREThe risk assessor using this SWED should indicate the maximum concentration for the relevant substance that can be used safely considering the conditions of use indicated in this SWED. In the Chesar file prepared by A.I.S.E. the default value for this field is set at 100%, unless manually modified by the risk assessor.falsetrue100.0W_PHYSICAL_FORM_OF_PRODUCTProduct ingredients mixed, diluted and/or suspendedfalsefalseW_PHYSICAL_FORM_OF_PRODUCT-LIQUIDDURATION_OF_ACTIVITYfalsetrue8.0TRA-WORKER-PLACE_OF_USEIndoors at industrial sitesfalsetrueTRA-WORKER-INDOOROPERATING_TEMPERATURECovers use at ambient temperatures.falsetrue25.0TRA-WORKER-OCCUPATIONAL-HYGIENE-PRACTICEfalsetrueTRA-WORKER-OCCUPATIONAL-HYGIENE-PRACTICE-INDUSTRIALUSE_EYE_PROTECTIONSuitable eye protection might be recommended in the SDS by the formulator depending on the product.falsefalseUSE_EYE_PROTECTION-NOTRA-WORKER-RESPIRATORY-PROTECTIONfalsefalseTRA-WORKER-RESPIRATORY-PROTECTION_NOT_USED_VOTRA-WORKER-DERMAL-PROTECTIONfalseESCom-10133224896ESCom-12355002165trueTRA-WORKER-DERMAL-PROTECTION_PPE80TRA-WORKER-GENERAL_VENTILATIONfalsefalseTRA-WORKER-GENERAL_VENTILATION-BASICTRA-WORKER-LOCAL-EXHAUST-VENTILATIONfalsefalseTRA-WORKER-LOCAL-EXHAUST-VENTILATION-NO4/01/2021falseA.I.S.E.IUC5-8da076c6-3275-4851-a726-2586b783a7e82021-01-06T09:00:012021-01-06T16:44:16ACTIVE4/01/2021
<text>Industrial uses; use in closed process</text>
AISE_SWED_IS_1_1Application of the product is highly automated. Examples are process where strong hygiene requirements apply, such as cleaning and disinfecting in food, beverage and pharmacos industries.
Application of product in a closed continuous process.trueCleaning in place within highly enclosed production equipmentIndustrial uses; use in closed processPROC_1W_PERCENTAGE_OF_SUBSTANCE_IN_MIXTUREThe risk assessor using this SWED should indicate the maximum concentration for the relevant substance that can be used safely considering the conditions of use indicated in this SWED. In the Chesar file prepared by A.I.S.E. the default value for this field is set at 100%, unless manually modified by the risk assessor.falsetrue100.0W_PHYSICAL_FORM_OF_PRODUCTProduct ingredients mixed, diluted and/or suspendedfalsefalseW_PHYSICAL_FORM_OF_PRODUCT-LIQUIDDURATION_OF_ACTIVITYduring a whole shiftfalsetrue8.0TRA-WORKER-PLACE_OF_USEIndoors at industrial sites in a fully enclosed equipmentfalsetrueTRA-WORKER-INDOOROPERATING_TEMPERATURECovers use at ambient temperatures.falsetrue25.0TRA-WORKER-OCCUPATIONAL-HYGIENE-PRACTICEfalsetrueTRA-WORKER-OCCUPATIONAL-HYGIENE-PRACTICE-INDUSTRIALUSE_EYE_PROTECTIONSuitable eye protection might be recommended in the SDS by the formulator depending on the productfalsefalseUSE_EYE_PROTECTION-NOTRA-WORKER-RESPIRATORY-PROTECTIONfalsefalseTRA-WORKER-RESPIRATORY-PROTECTION_NOT_USED_VOTRA-WORKER-DERMAL-PROTECTIONfalsefalseTRA-WORKER-DERMAL-PROTECTION_NOTRA-WORKER-GENERAL_VENTILATIONfalsefalseTRA-WORKER-GENERAL_VENTILATION-BASICTRA-WORKER-LOCAL-EXHAUST-VENTILATIONfalsefalseTRA-WORKER-LOCAL-EXHAUST-VENTILATION-NO4/01/2021falseA.I.S.E.IUC5-8da076c6-3275-4851-a726-2586b783a7e82021-01-06T08:52:022021-01-06T16:42:16ACTIVE4/01/2021
<text>Brushing; Automated task; Level I</text>
AISE_SWED_IS_10_2The product is brushed on and wiped off surfaces in a defined open processes.falseBrushing; Automated taskPROC_10W_PERCENTAGE_OF_SUBSTANCE_IN_MIXTUREThe risk assessor using this SWED should indicate the maximum concentration for the relevant substance that can be used safely considering the conditions of use indicated in this SWED. In the Chesar file prepared by A.I.S.E. the default value for this field is set at 100%, unless manually modified by the risk assessor.falsetrue100.0W_PHYSICAL_FORM_OF_PRODUCTProduct ingredients mixed, diluted and/or suspendedfalsefalseW_PHYSICAL_FORM_OF_PRODUCT-LIQUIDDURATION_OF_ACTIVITYduring a whole shiftfalsetrue8.0TRA-WORKER-PLACE_OF_USEindoors at industrial sitesfalsetrueTRA-WORKER-INDOOROPERATING_TEMPERATURECovers use at ambient temperatures.falsetrue25.0TRA-WORKER-OCCUPATIONAL-HYGIENE-PRACTICEfalsetrueTRA-WORKER-OCCUPATIONAL-HYGIENE-PRACTICE-INDUSTRIALUSE_EYE_PROTECTIONSuitable eye protection might be recommended in the SDS by the formulator depending on the product.falsefalseUSE_EYE_PROTECTION-NOTRA-WORKER-RESPIRATORY-PROTECTIONfalsefalseTRA-WORKER-RESPIRATORY-PROTECTION_NOT_USED_VOTRA-WORKER-DERMAL-PROTECTIONfalsefalseTRA-WORKER-DERMAL-PROTECTION_NOTRA-WORKER-GENERAL_VENTILATIONfalsefalseTRA-WORKER-GENERAL_VENTILATION-BASICTRA-WORKER-LOCAL-EXHAUST-VENTILATIONfalsefalseTRA-WORKER-LOCAL-EXHAUST-VENTILATION-NO4/01/2021falseA.I.S.E.IUC5-8da076c6-3275-4851-a726-2586b783a7e82021-11-07T20:56:592021-11-07T20:56:59ACTIVEENVIRONMENTfalseWATERE_W_6E_C_4...trueLaundry detergents, cleaners and maintenance products are applied as additives to water. After cleaning of substrate the washing / cleaning solutions are disposed of with the waste water.trueA.I.S.E.IUC5-8da076c6-3275-4851-a726-2586b783a7e82021-11-07T19:46:422021-11-07T20:52:35ACTIVEENVIRONMENTfalseAIRSOILWATERE_W_3E_C_4Reduced number of transfer and cleaning operations and/or dedicated storage tanks for raw materials, premixes and final products and/or residues of granular detergents recovered in cleaning steps at packaging or transfer lines are recycled into slurriestrueReduced number of transfer and cleaning operations through e.g. manufacturing of different products from one premix (masterbatch), to which certain ingredients are added to yield the final products and/or Dedicated storage tanks for raw materials, premixes and final products and/or Residues of granular detergents recovered in cleaning steps at packaging or transfer lines are recycled into the slurriesReduced number of transfer and cleaning operations through e.g. manufacturing of different products from one premix (masterbatch), to which certain ingredients are added to yield the final products and/or Dedicated storage tanks for raw materials, premixes and final products and/or Residues of granular detergents recovered in cleaning steps at packaging or transfer lines are recycled into the slurriestrueReduced number of transfer and cleaning operations through e.g. Dedicated storage tanks for raw materials and final products and/or Recovery of materials through e.g. recycling Residues of powder ingredients in cleaning steps at packaging or transfer linefalseReduced number of transfer and cleaning operations through e.g. Dedicated storage tanks for raw materials and final products and/or Recovery of materials through e.g. recycling residues of powder ingredients in cleaning steps at packaging or transfer line into the processReduced number of transfer and cleaning operations through e.g. Dedicated storage tanks for raw materials and final products and/or Recovery of materials through e.g. recycling residues of powder ingredients in cleaning steps at packaging or transfer line into the processtrueClosed batch process and/or batch production of final product and/or (Dry) cleaning procedures with maximization of waste reuse in the process and/or Reduced number of transfer and cleaning operations and/or Dedicated storage tanks and/or Spill protectionfalseClosed batch process and/or batch production of final product and/or (Dry) cleaning procedures with maximization of waste reuse in the process and/or Reduced number of transfer and cleaning operations through e.g. manufacturing of different products from one premix, to which certain ingredients are added to yield the final products and/or Dedicated storage tanks for raw materials, premixes and final products and/or Spill protection including reuse of SpillClosed batch process and/or batch production of final product and/or (Dry) cleaning procedures with maximization of waste reuse in the process and/or Reduced number of transfer and cleaning operations through e.g. manufacturing of different products from one premix, to which certain ingredients are added to yield the final products and/or Dedicated storage tanks for raw materials, premixes and final products and/or Spill protection including reuse of SpilltrueReduced number of transfer and cleaning operations through e.g. dedicated storage tanks for raw materials, premixes and final products and/or Spill protection including reuse of spillfalseReduced number of transfer and cleaning operations through e.g. dedicated storage tanks for raw materials, premixes and final products and/or Spill protection including reuse of spillReduced number of transfer and cleaning operations through e.g. dedicated storage tanks for raw materials, premixes and final products and/or Spill protection including reuse of spilltrueA.I.S.E.IUC5-8da076c6-3275-4851-a726-2586b783a7e82022-03-03T19:45:592022-03-03T19:48:28ACTIVEENVIRONMENTfalseWATERE_W_3E_C_4RMMtruepH adjustment and/or precipitation e.g. by air flotation and/or filtration or other suitable techniques. Sites are operated to meet the local requirements for emissions of metals.trueWATER95.095.099.0cf. AISE Background documentA.I.S.E.IUC5-8da076c6-3275-4851-a726-2586b783a7e82021-11-07T20:01:262021-11-07T20:55:45ACTIVEENVIRONMENTfalseAIRE_W_6E_C_4...truePropellants of air care products or cleaning and maintenance sprays completely evaporate during application.falseA.I.S.E.IUC5-8da076c6-3275-4851-a726-2586b783a7e82021-11-07T20:19:552021-11-07T20:55:23ACTIVEENVIRONMENTfalseAIRSOILWATERE_W_6E_C_4The application fluid is kept in a reservoir and/or The application fluid in the reservoir can be disposed of periodically and/or Closed system with regards to emissions to the environment and/or Optimized water use due to e.g.: Re-use of rinsing watertrueThe application fluid is kept in a reservoir. The fluid is pumped to dedicated machine(s) in order to be applied to the substrate or it is kept in a treatment bath (e.g. vehicle cleaning, metal working fluids, etc.). With each piece of substrate a fraction of the application fluid is carried-over from the treatment bath. Via a sequence of rinsing steps this fraction of the application fluid is continuously emitted to the wastewater. The reservoir is continuously replenished; and/or
The application fluid in the reservoir can be disposed of periodically: This may or may not involve on-site pre-treatment or disposal to the wastewater. As a result, constituents of the application fluid are removed during the on-site treatment according to the efficiency of the selected emission reduction. In addition, raw materials may be recovered. The choice of suitable emission reduction technology depends on the process; and/or
Closed system with regards to emissions to the environment. Spent application fluid is not released to the environment. It is disposed of periodically as waste (with or without prior treatment). This type of application includes several surface finishing, water conditioning etc. applications. No emissions to the wastewater occur. The local waste handling regulations have to be followed. Additional instructions for handling waste may be included in the safety data sheet; and/or
Optimized water use due to e.g.: Re-use of rinsing waterThe application fluid is kept in a reservoir and/or The application fluid in the reservoir can be disposed of periodically and/or Closed system with regards to emissions to the environment and/or Optimized water use due to e.g.: Re-use of rinsing watertrueMetal salts are dissolved in a water-borne application fluid, which is kept in a reservoir or treatment baths and/or Spray applications are housed-in for the sake of worker protection; and/or Optimized water use; and/or Periodically emptying and refillingfalseMetal salts are dissolved in a water-borne application fluid, which is kept in a reservoir or treatment baths. Metal fluids are continuously emitted to the wastewater via a sequence of rinsing steps. For details of OCs refer to background document”; and/or
Spray applications are housed-in for the sake of worker protection; and/or
Optimized water use due to e.g.: Re-use of rinsing water; and/or
Periodically, the reservoirs are emptied of the spent reservoir fluid and refilled with fresh reservoir fluid. Operators minimize the frequency of exchanging the reservoir fluid to reduce the cost of process chemicals, waste treatment and equipment downtime.Metal salts are dissolved in a water-borne application fluid, which is kept in a reservoir or treatment baths. Metal fluids are continuously emitted to the wastewater via a sequence of rinsing steps. For details of OCs refer to background document”; and/or
Spray applications are housed-in for the sake of worker protection; and/or
Optimized water use due to e.g.: Re-use of rinsing water; and/or
Periodically, the reservoirs are emptied of the spent reservoir fluid and refilled with fresh reservoir fluid. Operators minimize the frequency of exchanging the reservoir fluid to reduce the cost of process chemicals, waste treatment and equipment downtime.trueA.I.S.E.IUC5-8da076c6-3275-4851-a726-2586b783a7e82021-11-07T20:57:302021-11-07T20:57:30ACTIVEENVIRONMENTfalseWATERE_W_6E_C_4...trueproduct residues remaining on the substrate are likely to be washed off in the next cleaning eventtrueA.I.S.E.IUC5-8da076c6-3275-4851-a726-2586b783a7e82021-11-07T19:58:182021-11-07T20:54:26ACTIVEENVIRONMENTfalseWATERE_W_3E_C_4Dry cleaning of equipment, use of Central or Peripheral Vacuum Cleaning and/or cleaning involving so-called pigs in sub-processes involving liquid slurries and/or re-Use of process grey water for cleaningtrueDry cleaning of equipment, use of Central or Peripheral Vacuum Cleaning and/or cleaning involving so-called pigs in sub-processes involving liquid slurries and/or re-Use of process grey water for cleaningDry cleaning of equipment, use of Central or Peripheral Vacuum Cleaning and/or cleaning involving so-called pigs in sub-processes involving liquid slurries and/or re-Use of process grey water for cleaningtrueManual removal of residual products adhering to equipment and/or Use of two-liner systems (i.e. single Use disposable reactor cover that is incinerated after Use as solid waste) and/or Use of adsorption pads to clean spillsfalseManual removal of residual products adhering to equipment (e.g. by manual scrubbing, vacuum cleaning, etc.) and/or Use of two-liner systems (i.e. single Use disposable reactor cover that is incinerated after Use as solid waste) and/or Use of adsorption pads to clean spillsManual removal of residual products adhering to equipment (e.g. by manual scrubbing, vacuum cleaning, etc.) and/or Use of two-liner systems (i.e. single Use disposable reactor cover that is incinerated after Use as solid waste) and/or Use of adsorption pads to clean spillstrueDry cleaning of equipment and/or Steam cleaning and/or cleaning involving so-called pigs and/or "Cleaning in place" CIP-System and/or Use of two-liner systems and/or Manual removal of residual products adhering to equipment and/or re-Use of grey waterfalseDry cleaning of equipment (Use of absorbent materials including incineration of resulting solid waste) and/or Steam cleaning and/or cleaning involving so-called pigs and/or "Cleaning in place" CIP-System and/or Use of two-liner systems (i.e. single Use disposable reactor cover that is incinerated after Use as solid waste) Manual removal of residual products adhering to equipment (e.g. by manual scrubbing, vacuum cleaning, etc.) and/or re-Use of process grey water for cleaningDry cleaning of equipment (Use of absorbent materials including incineration of resulting solid waste) and/or Steam cleaning and/or cleaning involving so-called pigs and/or "Cleaning in place" CIP-System and/or Use of two-liner systems (i.e. single Use disposable reactor cover that is incinerated after Use as solid waste) and/or Manual removal of residual products adhering to equipment (e.g. by manual scrubbing, vacuum cleaning, etc.) and/or re-Use of process grey water for cleaningtrue(Dry) cleaning procedures with maximization of waste reuse in the process and/or Use of two-liner systems (i.e. single use disposable reactor cover that is incinerated after use as solid waste) and/or Manual removal of residual productsfalse(Dry) cleaning procedures with maximization of waste reuse in the process and/or Use of two-liner systems (i.e. single use disposable reactor cover that is incinerated after use as solid waste) and/or Manual removal of residual products adhering to equipment (e.g. by manual scrubbing, vacuum cleaning, etc.)(Dry) cleaning procedures with maximization of waste reuse in the process and/or Use of two-liner systems (i.e. single use disposable reactor cover that is incinerated after use as solid waste) and/or Manual removal of residual products adhering to equipment (e.g. by manual scrubbing, vacuum cleaning, etc.)trueChesarIUC5-97ce9eec-ebfd-4b2d-a61b-b9a975e920b52015-03-16T16:40:11ACTIVEENVIRONMENTEUSES DeterminanttrueWATERE_W_4EUSES 2.1.2YestruefalseNofalseESCom-11133170644trueChesarIUC5-97ce9eec-ebfd-4b2d-a61b-b9a975e920b52015-03-16T16:40:11ACTIVECONSUMERSTRA Consumer condition of usetrueDERMALINHALATIONORALC_1ConsExpo100.00.0100.0<=ESCom-9269144102ESCom-11133171519trueChesarIUC5-97ce9eec-ebfd-4b2d-a61b-b9a975e920b52015-03-16T16:40:11ACTIVECONSUMERStrueDERMALINHALATIONC_1GasfalsefalseLiquidfalsefalseLiquid for spraying (spraying can)falsefalseSolid (unspecified form)falsefalseSolid (very dusty form)falsefalseSolid (medium dusty form)falsefalseSolid (non or low dusty form)falsefalseChesarIUC5-97ce9eec-ebfd-4b2d-a61b-b9a975e920b52015-03-16T16:40:11ACTIVEWORKERSTRA Worker condition of usetrueDERMALINHALATIONW_2TRA Worker 3.08.00.024.0<=ESCom-15193135624ESCom-11133171521trueChesarIUC5-97ce9eec-ebfd-4b2d-a61b-b9a975e920b52015-03-16T16:40:11ACTIVEENVIRONMENTtrueAIRSOILWATERE_W_6E_C_4IndoorfalseESCom-9313213237trueOutdoorfalseESCom-9313213238trueIndoor/OutdoorfalseESCom-10133220202trueChesarIUC5-97ce9eec-ebfd-4b2d-a61b-b9a975e920b52015-03-16T16:40:112020-03-06T09:08:33ACTIVEENVIRONMENTEUSES DeterminanttrueWATERE_W_4E_C_4EUSES 2.1.2StandardtrueESCom-11133170613trueWATER0.0100.0Site specificfalseESCom-11133171638trueWATER0.0100.0NonefalsefalseWATER0.00.00.0ChesarIUC5-97ce9eec-ebfd-4b2d-a61b-b9a975e920b52015-03-16T16:40:11ACTIVEENVIRONMENTEUSES DeterminanttrueWATERE_W_4EUSES 2.1.22000.00.0>=ESCom-11133170818ESCom-10133222104trueChesarIUC5-97ce9eec-ebfd-4b2d-a61b-b9a975e920b52015-03-16T16:40:11ACTIVEWORKERSTRA Worker condition of usetrueDERMALINHALATIONW_5TRA Worker 3.040.00.0<=ESCom-9269144108ESCom-12355002161trueChesarIUC5-97ce9eec-ebfd-4b2d-a61b-b9a975e920b52015-03-16T16:40:11ACTIVEENVIRONMENTReleaseModule's DeterminanttrueAIRSOILWATERE_W_2EUSES 2.1.20.0<=ESCom-11133170824ESCom-10076084404trueChesarIUC5-97ce9eec-ebfd-4b2d-a61b-b9a975e920b52015-03-16T16:40:11ACTIVEENVIRONMENTReleaseModule's DeterminanttrueAIRSOILWATERE_W_2EUSES 2.1.20.0<=ESCom-15193135620ESCom-10076084403trueChesarIUC5-97ce9eec-ebfd-4b2d-a61b-b9a975e920b52015-03-16T16:40:11ACTIVEENVIRONMENTReleaseModule's DeterminanttrueAIRSOILWATERE_W_2E_C_2EUSES 2.1.20.0<=ESCom-15193135620falseChesarIUC5-97ce9eec-ebfd-4b2d-a61b-b9a975e920b52015-03-16T16:40:11ACTIVEENVIRONMENTReleaseModule's DeterminanttrueAIRSOILWATERE_W_2E_C_2EUSES 2.1.20.0100.0=ESCom-9269144102falseChesarIUC5-97ce9eec-ebfd-4b2d-a61b-b9a975e920b52015-03-16T16:40:11ACTIVEWORKERSCore worker condition of usetrueDERMALW_4ECETOC TRA worker;ART;MEASE;Stoffenmanager;EMKGNotruefalseYes (effectiveness ≥ 80%)falseESCom-10133224896ESCom-17297180800ESCom-12355002165trueChemical resistant dermal protection with basic employee training. (effectiveness ≥ 90%)falseESCom-11133171457ESCom-17297180800ESCom-12355002165trueChemical resistant dermal protection with specific employee training. (effectiveness ≥ 95%)falseESCom-11133171458ESCom-17297180800ESCom-12355002165trueChesarIUC5-97ce9eec-ebfd-4b2d-a61b-b9a975e920b52015-03-16T16:40:11ACTIVEWORKERSCore worker condition of usetrueINHALATIONW_3ECETOC TRA worker;ART;MEASE;Stoffenmanager;EMKGBasic (up to 3 ACH)truefalseGood (3 to 5 ACH)falseESCom-11133171363trueEnhanced (5 to 10 ACH)falseESCom-12355002164trueSpecialised (10 to 30 ACH)falseESCom-20149115700trueSpecialised (more than 30 ACH)falseESCom-20149115800trueDown-flow spray roomfalseESCom-20149120100trueChesarIUC5-97ce9eec-ebfd-4b2d-a61b-b9a975e920b52015-03-16T16:40:11ACTIVEWORKERSCore worker condition of usetrueDERMALINHALATIONW_3ECETOC TRA worker;ART;MEASE;Stoffenmanager;EMKGNotruefalseYes, basic LEV such as canopy hood, movable capturing hood or other multi-purpose LEV (assumed effectiveness 50-80%)falseProvide basic LEV such as canopy hood, movable capturing hood or other multipurpose LEV. Ensure effectiveness is at least 50%.trueYes, specifically designed LEV such as receiving hoods (assumed effectiveness ≥ 80-90%)falseProvide specifically designed and maintained LEV (receiving hood type). Ensure effectiveness is at least 80%.trueYes, specifically designed fixed capturing hood, on tool extraction or enclosing hoods (assumed effectiveness ≥ 90-95%)falseProvide specifically designed and maintained LEV (fixed capturing hood type, on-tool extraction or enclosing hood type). Ensure effectiveness is at least 90%.trueYes, enclosing hood with very high effectiveness such as fume cupboard (assumed effectiveness ≥ 95%)falseProvide enclosing hood with very high effectiveness (such as fume cupboard) or effective ventilation by spray booth according to EN 16985. Ensure effectiveness is at least 95%.trueChesarIUC5-97ce9eec-ebfd-4b2d-a61b-b9a975e920b52015-03-16T16:40:11ACTIVEWORKERSCore worker condition of usetrueDERMALINHALATIONW_3ECETOC TRA worker;ART;MEASE;Stoffenmanager;EMKGAdvancedfalseESCom-17297180701ESCom-11133170477ESCom-9267230103ESCom-20149153500trueBasicfalsefalseChesarIUC5-97ce9eec-ebfd-4b2d-a61b-b9a975e920b52015-03-16T16:40:11ACTIVEWORKERSCore worker condition of usetrueINHALATIONW_5ECETOC TRA worker;ART;MEASE;Stoffenmanager;EMKGIndoortrueESCom-9313213237trueOutdoorfalseESCom-9313213238trueIndoor (Room 100-1000 m3)falseCovers room volume ≥ 100 m3trueIndoor (Room > 1000 m3)falseCovers room volume > 1000 m3trueChesarIUC5-97ce9eec-ebfd-4b2d-a61b-b9a975e920b52015-03-16T16:40:11ACTIVEWORKERSCore worker condition of usetrueINHALATIONW_4ECETOC TRA worker;ART;MEASE;Stoffenmanager;EMKGNotruefalseYes (APF ≥ 10)falseWear a respirator which reduces the air impurities by at least a factor of 10 (APF ≥ 10). For further specification, refer to section 8 of the SDStrueYes (APF ≥ 20)falseWear a respirator which reduces the air impurities by at least a factor of 20 (APF ≥ 20). For further specification, refer to section 8 of the SDStrueYes (APF ≥ 4)falseWear a respirator which reduces the air impurities by at least a factor of 4 (APF ≥ 4). For further specification, refer to section 8 of the SDStrueYes (APF ≥ 5)falseWear a respirator which reduces the air impurities by at least a factor of 5 (APF ≥ 5). For further specification, refer to section 8 of the SDStrueYes (APF ≥ 40)falseWear a respirator which reduces the air impurities by at least a factor of 40 (APF ≥ 40). For further specification, refer to section 8 of the SDStrueYes (APF ≥ 200)falseWear a respirator which reduces the air impurities by at least a factor of 200 (APF ≥ 200). For further specification, refer to section 8 of the SDStrueYes (APF ≥ 2000)falseWear a respirator which reduces the air impurities by at least a factor of 2000 (APF ≥ 2000). For further specification, refer to section 8 of the SDStrueChesarIUC5-97ce9eec-ebfd-4b2d-a61b-b9a975e920b52015-03-16T16:40:11ACTIVECONSUMERStrueDERMALORALC_3TRA Consumer 3.1;ConsExpoAdultfalsefalseChildfalsefalseChesarIUC5-97ce9eec-ebfd-4b2d-a61b-b9a975e920b52015-03-16T16:40:11ACTIVECONSUMERSTRA Consumer condition of usetrueINHALATIONC_2TRA Consumer 3.0;TRA Consumer 3.1;ConsExpo0.0<=ESCom-11133170819ESCom-11133171520trueChesarIUC5-97ce9eec-ebfd-4b2d-a61b-b9a975e920b52015-03-16T16:40:11ACTIVECONSUMERSsurface of the skin exposed to the contact with the substance and identified uniquely by a selected body part.trueDERMALC_4TRA Consumer 3.0;TRA Consumer 3.1FingertipsfalseESCom-12355002180trueTwo fingertipsfalseAssumes that potential dermal contact is limited to two fingertipstruePalm of one handfalseAssumes that potential dermal contact is limited to palm of one handtrueInside hands / one hand / palm of handsfalseESCom-12355002181trueHandsfalseESCom-12355002182trueHands and forearmsfalseESCom-12355002183trueUpper part of the bodyfalseESCom-12355002184trueLower part of the bodyfalseESCom-12355002185trueWhole body except feet, hands and headfalseESCom-12355002186trueWhole bodyfalsefalseChesarIUC5-97ce9eec-ebfd-4b2d-a61b-b9a975e920b52015-03-16T16:40:11ACTIVECONSUMERSFraction of substance transferred (>0 to 1) from the product/article contact layer (layer assumed to be in interaction with the skin) to the skintrueDERMALC_4TRA Consumer 3.0;TRA Consumer 3.11.00.01.0=falseChesarIUC5-97ce9eec-ebfd-4b2d-a61b-b9a975e920b52015-03-16T16:40:11ACTIVECONSUMERSAssumed duration of exposure per use event.trueINHALATIONC_2TRA Consumer 3.0;TRA Consumer 3.10.024.0=ESCom-15193135758ESCom-11133170461trueChesarIUC5-97ce9eec-ebfd-4b2d-a61b-b9a975e920b52015-03-16T16:40:11ACTIVECONSUMERStrueDERMALC_1TRA Consumer 3.1YestruefalseNo dermal contactfalseAssumes no dermal contacttrueDermal exposure assumed to be negligiblefalseDermal exposure assumed to be negligibletrueChesarIUC5-97ce9eec-ebfd-4b2d-a61b-b9a975e920b52015-03-16T16:40:11ACTIVECONSUMERStrueINHALATIONC_1TRA Consumer 3.1YestruefalseInhalation exposure is considered to be not relevant falseESCom-12355002171trueChesarIUC5-97ce9eec-ebfd-4b2d-a61b-b9a975e920b52015-03-16T16:40:11ACTIVECONSUMERStrueORALC_1TRA Consumer 3.1YestruefalseOral exposure is considered to be not relevant falseESCom-12355002172trueChesarIUC5-97ce9eec-ebfd-4b2d-a61b-b9a975e920b52015-03-16T16:40:11ACTIVECONSUMERSNumber of use events per day.trueDERMALINHALATIONORALC_2TRA Consumer 3.0;TRA Consumer 3.1;ConsExpo1.01.0=ESCom-12355002188ESCom-11133171521trueChesarIUC5-97ce9eec-ebfd-4b2d-a61b-b9a975e920b52015-03-16T16:40:11ACTIVECONSUMERStrueDERMALINHALATIONORALC_2TRA Consumer 3.1;ConsExpoFrequenttruefalseInfrequentfalseCovers infrequent uses, up to 2 weeks per yeartrueChesarIUC5-97ce9eec-ebfd-4b2d-a61b-b9a975e920b52015-03-16T16:40:11ACTIVECONSUMERSRepresents the fraction of product that is released to air during a consumer use: a factor of 0.05 would be the ITF in a case where 5% of a substance is released to air during a consumer use.trueINHALATIONC_4TRA Consumer 3.11.00.01.0=falseChesarIUC5-97ce9eec-ebfd-4b2d-a61b-b9a975e920b52015-03-16T16:40:11ACTIVECONSUMERStrueINHALATIONC_3TRA Consumer 3.1IndoortruefalseOutdoorfalseESCom-9313213238trueChesarIUC5-97ce9eec-ebfd-4b2d-a61b-b9a975e920b52015-03-16T16:40:11ACTIVECONSUMERSConditions of use that implies the substance to be entirely released to air during the application.trueINHALATIONC_1TRA Consumer 3.0;TRA Consumer 3.1YesfalsefalseNotrueESCom-10133224609trueChesarIUC5-97ce9eec-ebfd-4b2d-a61b-b9a975e920b5ACTIVEWORKERSCore worker condition of usetrueEYEW_4ECETOC TRA worker;ART;MEASE;Stoffenmanager;EMKGEye protectionfalseESCom-11133171467trueNotruefalseFace protection/visorfalseESCom-11133170516trueChesarIUC5-97ce9eec-ebfd-4b2d-a61b-b9a975e920b52015-03-16T16:40:112020-12-08T11:04:33ACTIVEENVIRONMENTSpecific conditions during the waste life stage of the substance potentially going beyond the local or national legal requirements for waste treatment (disposal or recovery) operations. The determinant values either provide i) a generic justification why no particular considerations regarding environmental risks from the waste life stage are needed or ii) indicate particular conditions to be met during waste treatment. For both assessment cases the single registrant can edit justification/conditions if the generic determinant values do not cover his case.trueWATERE_W_5E_C_3EUSES 2.1.2No (no waste)falseNo waste generated.ESCom-11133170674trueNo (low risk)falseERC based assessment demonstrating control of risk with default conditions. Low risk assumed for waste life stage. Waste disposal according to national/local legislation is sufficient.ESCom-11133171479trueNo (low amount)falseParticular risks from waste treatment unlikely due to small fraction of used substance entering into the waste stage. Waste disposal according to national/local legislation is sufficient.ESCom-11133171479trueNo (low concentration)falseParticular risks from waste treatment unlikely due low concentration of substance in waste stream. Waste disposal according to national/local legislation is sufficient.ESCom-11133171479trueNo (other reason)falseWaste disposal according to national/local legislation is sufficient. "Explanation for the CSR" to be reported by each registrant:ESCom-11133171479trueDedicated recollection infrastructure requiredfalseESCom-12355002107trueBiological treatment not appropriatefalseESCom-12355002101trueIncineration not appropriatefalseESCom-12355002100truePrevent formation of hazardous break down products during thermal waste treatment destruction.falsePrevent formation of hazardous break down products during thermal waste treatment.trueClosed system required to minimise release to the environment.falseClosed system required to minimise release to the environment during waste treatment.trueOtherfalse"Explanation for the CSR" to be reported by each registrant on the specific conditions required for waste treatment:Dispose of waste product or used containers according to local regulations.trueChesarIUC5-97ce9eec-ebfd-4b2d-a61b-b9a975e920b52020-03-06T09:02:47ACTIVEENVIRONMENTtrueWATERE_W_6E_C_4Yesfalsewater contact during use.trueNofalseESCom-16354140700trueChesarIUC5-97ce9eec-ebfd-4b2d-a61b-b9a975e920b52015-03-16T16:40:11ACTIVEWORKERSTRA Worker condition of usetrueDERMALINHALATIONW_1100.00.0100.0<=ESCom-9269144102ESCom-11133171519trueChesarIUC5-97ce9eec-ebfd-4b2d-a61b-b9a975e920b52015-03-16T16:40:11ACTIVEWORKERSCore worker condition of usetrueDERMALINHALATIONW_1ECETOC TRA worker;ART;MEASE;Stoffenmanager;EMKGGasfalseESCom-9313213340trueLiquefied gasfalseESCom-11137200300trueLiquid, including paste/slurry/suspensionfalseESCom-9268175004trueSolid (material with high dustiness)falseESCom-9268175006ESCom-20149164100trueSolid (material with medium dustiness)falseESCom-9268175006ESCom-20149164000trueSolid (material with no or very low dustiness)falseESCom-9268175006ESCom-20149163800trueMolten metalfalseESCom-20149135400trueSolid objectfalseESCom-15193135772trueSolid (material with low dustiness)falseESCom-9268175006ESCom-20149163900trueSolid (material with very high dustiness)falseESCom-9268175006ESCom-20149164200trueA.I.S.E.IUC5-8da076c6-3275-4851-a726-2586b783a7e82021-11-07T19:51:552021-11-07T20:53:40ACTIVEENVIRONMENTfalseAIRSOILWATERE_W_3E_C_4Closed automated process for the transport and handling of raw materials and/or Closed transfer system and/or Centralized process control and/or Use of robotics technologytrueClosed automated process for the transport and handling of raw materials and/or Closed transfer system and/or Centralized process control and/or Use of robotics technologytrueClosed automated process for the transport and handling of raw materials and/or Closed transfer system and/or Centralized process controlfalseClosed automated process for the transport and handling of raw materials and/or Closed transfer system and/or Centralized process controltrueClosed batch production process and/or Semi-Closed transfer system and/or Dedicated storage tanks for raw materials, premixes and final products and/or Use of robotics technologyfalseClosed batch production process and/or Semi-Closed transfer system and/or Dedicated storage tanks for raw materials, premixes and final products and/or Use of robotics technologytrueClosed batch production process and/or Semi-Closed transfer system and/or Dedicated storage tanks for raw materials, premixes and final productsfalseClosed batch production process and/or Semi-Closed transfer system and/or Dedicated storage tanks for raw materials, premixes and final productstrueA.I.S.E.IUC5-8da076c6-3275-4851-a726-2586b783a7e82021-11-07T20:50:192021-11-07T20:50:54ACTIVEENVIRONMENTfalseAIRSOILWATERE_W_5E_C_3Residues which cannot be recycled are disposed off as chemical waste and/or Spill protection including waste reusetrueResidues which cannot be recycled are disposed off as chemical waste and/or Spill protection including waste reusetrueWhat cannot be recycled into the process will become waste that needs to be disposed of. Liquid waste is typically directed to waste water, while solid waste can be treated as industrial waste and incinerated. and/or Spill protection including waste reusefalseWhat cannot be recycled into the process will become waste that needs to be disposed of. Liquid waste is typically directed to waste water, while solid waste can be treated as industrial waste and incinerated. and/or Spill protection including waste reusetrueManual removal of residual products adhering to equipment (e.g. by scrubbing, vacuum cleaning, etc.) and/or Residues which cannot be recycled are disposed of as chemical wastefalseManual removal of residual products adhering to equipment (e.g. by scrubbing, vacuum cleaning, etc.) and/or Residues which cannot be recycled are disposed of as chemical wastetrueResidues which cannot be recycled are disposed of as chemical waste which may be handled by an external third partyfalseResidues which cannot be recycled are disposed of as chemical waste which may be handled by an external third partytrueProduct residues are disposed with industrial waste. Empty large containments (e.g. IBC) are returned to the manufacturer.falseProduct residues are disposed with industrial waste. Empty large containments (e.g. IBC) are returned to the manufacturer.trueSpill protection including waste reuse and/or the treatment of the spent process fluids by pH-adjustment and/or subsequent filtration/sedimentation results in slurries or solid waste which is treated off-site.falseSpill protection including waste reuse and/or the treatment of the spent process fluids by pH-adjustment and/or subsequent filtration/sedimentation results in slurries or solid waste which is treated off-site.trueproduct residues remaining in the product packaging are disposed of via domestic wastefalseproduct residues remaining in the product packaging are disposed of via domestic wastetrueDaily amount per sitetruetruetrueAnnual amount per sitetruetruetrueWide dispersive usefalsefalsefalseIndoor/Outdoor usefalsefalsefalseAssumed domestic sewage treatment plant flowtruetruetrueNo sprayingfalsefalsefalseWear suitable gloves tested to EN374.falsefalsefalseTabletting, compression, extrusion or pelletisationfalsefalsefalseIndustrial usesfalsefalsefalseConsumer usesfalsefalsefalseProfessional usesfalsefalsefalseAir care productsfalsefalsefalseBiocidal products (e.g. disinfectants, pest control)falsefalsefalsePolishes and wax blendsfalsefalsefalseTransfer of substance or preparation (charging/discharging) from/to vessels/large containers at dedicated facilitiesfalsefalsefalseTransfer of substance or preparation into small containers (dedicated filling line, including weighing)falsefalsefalseTreatment of articles by dipping and pouringfalsefalsefalseExposure durationtruetruetrueRegular inspection and maintenance of equipment and machinesfalsefalsefalseWear suitable face shield.falsefalsefalseAutomated taskfalsefalsefalseMunicipal sewage treatment plant is assumed.falsefalsefalseUse in closed processfalsefalsefalseNo application of sewage sludge to soilfalsefalsefalseNo waste from processfalsefalsefalsem3/dayfalsefalsefalseg/eventfalsefalsefalsetonnes/yearfalsefalsefalseProvide a good standard of general ventilation (not less than 3 to 5 air changes per hour).falsefalsefalseWear chemically resistant gloves (tested to EN374) in combination with ‘basic’ employee training.falsefalsefalseWear chemically resistant gloves (tested to EN374) in combination with specific activity training.falsefalsefalseUse suitable eye protection.falsefalsefalseDispose of waste product or used containers according to local regulations.falsefalsefalseCovers concentrations up tofalsetruetrueFor each use event, covers use amounts up tofalsetruetrueCovers use up tofalsetruetrueProvide onsite wastewater removal efficiency oftruetruetrueLiquefied gasfalsefalsefalseIncineration is not appropriate for waste.falsefalsefalseBiological treatment is not appropriate for waste.falsefalsefalseDedicated recollection infrastructure required for wastefalsefalsefalseAssumes process temperature up tofalsetruetrueProvide a good standard of controlled ventilation (5 to 10 air changes per hour).falsefalsefalseFor further specification, refer to section 8 of the SDS.falsefalsefalseInhalation exposure is considered to be not relevant.falsefalsefalseOral exposure is considered to be not relevant.falsefalsefalseAssumes that potential dermal contact is limited to fingertips.falsefalsefalseAssumes that potential dermal contact is limited to inside hands / one hand / palm of hands.falsefalsefalseAssumes that potential dermal contact is limited to hands.falsefalsefalseAssumes that potential dermal contact is limited to hands and forearms.falsefalsefalseAssumes that potential dermal contact is limited to upper part of the body.falsefalsefalseAssumes that potential dermal contact is limited to lower part of the body.falsefalsefalseAssumes that potential dermal contact excludes feet, hands and head.falsefalsefalseevents per dayfalsefalsefalseDedicated equipmentfalsefalsefalsetonnes/dayfalsefalsefalseh/dayfalsefalsefalseh/eventfalsefalsefalseMassive objectfalsefalsefalseSemi-closed systemfalsefalsefalseSemi-automated taskfalsefalsefalseNo water contact during use.falsefalsefalseAssumes that activities are undertaken with appropriate and well maintained equipment by trained personal operating under supervision.falsefalsefalseIf skin contamination is expected to extend to other parts of the body, then these body parts should also be protected with impervious garments in a manner equivalent to those described for the hands.falsefalsefalseProvide specialised room ventilation (at least 10 air changes per hour).falsefalsefalseProvide specialised room ventilation (at least 30 air changes per hour).falsefalsefalseProvide down-flow spray room.falsefalsefalseMolten inorganic substancesfalsefalsefalseEnsure daily cleaning of the equipment.falsefalsefalseVery low dustiness: Handling the product does not result in dust emission without intentional breakage of products. For example, granules covered with a layer of wax.falsefalsefalseLow dustiness: Handling the product does not result in a visible dust cloud. For example, animal pellets.falsefalsefalseMedium dustiness: Handling the product in its dry form results in a dust cloud that settles quickly due to gravity. For example, sand.falsefalsefalseHigh dustiness: Handling the product in its dry form results in a dust cloud that is clearly visible for some time. For example, talcum powder.falsefalsefalseVery high dustiness: Handling the product in its dry form results in a dust cloud that remains airborne for a long time.falsefalsefalseClear spills immediately.falsefalsefalseLiquidfalsefalsefalseSolidfalsefalsefalseIndustrial usefalsefalsefalse%falsefalsefalse°CfalsefalsefalseIndoor usefalsefalsefalseOutdoor usefalsefalsefalseGaseousfalsefalsefalse