Registration Dossier

Physical & Chemical properties

Vapour pressure

Currently viewing:

Administrative data

Link to relevant study record(s)

Reference
Endpoint:
vapour pressure
Type of information:
calculation (if not (Q)SAR)
Adequacy of study:
key study
Reliability:
2 (reliable with restrictions)
Rationale for reliability incl. deficiencies:
accepted calculation method
Remarks:
Vapor pressure was calculated by computer software from Advanced Chemistry Development Inc. reported as useable QSAR software in the "Guidance on information requirements", R.7a, Section 7.1.5.3, Table R.7.1-18.
Reason / purpose:
reference to other study
Principles of method if other than guideline:
Vapour pressure was calculated by computer software from Advanced Chemistry Development Inc., as the calculated VP of BPA-DA (5E-18 Pa at 25 °C) was less than the detection limit (~ 1E-5 Pa) of the most sensitive vapour pressure method (gas saturation method; OECD 104, 1995).
GLP compliance:
no
Type of method:
other: Calculation
Key result
Temp.:
25 °C
Remarks on result:
other: Vapour pressure = 5E-18
Conclusions:
Under the conditions of this study, the vapour pressure of the test material was calculated to be 5E-18 Pa at 25 °C.
Executive summary:

The vapour pressure of the test material was calculated based on its boiling point by computer software from Advanced Chemistry Development Inc.

Under the conditions of this study, the vapour pressure of the test material was calculated to be 5E-18 Pa at 25 °C.

Description of key information

The vapour pressure was calculated to be 5E-18 Pa at 25 °C.

Key value for chemical safety assessment

Vapour pressure:
0 Pa
at the temperature of:
25 °C

Additional information

The vapour pressure of the test material was calculated based on its boiling point by computer software from Advanced Chemistry Development Inc. The study was awarded a reliability score of 2 in accordance with the criteria set forth by Klimisch et al. (1997).

Under the conditions of this study, the vapour pressure of the test material was calculated to be 5E-18 Pa at 25 °C.