Tato webová stránka používá cookies, aby se vám naše stránky používaly co nejlépe.
Nařízení REACH si klade za cíl zlepšit ochranu lidského zdraví a životního prostředí před riziky, která mohou představovat chemické látky.
Nařízení CLP zajišťuje, aby rizika, která představují chemické látky, byla pracovníkům a spotřebitelům v Evropské unii jasně sdělována pomocí klasifikace a označení chemických látek.
Seznam klasifikací a označení
Cílem nařízení o biocidních přípravcích (BPR) je zlepšit fungování trhu s biocidními přípravky v EU a zároveň zajistit vysokou úroveň ochrany lidí a životního prostředí.
Schvalování účinných látek
Povolování biocidních přípravků
Pokyny a nástroje IT
Nařízení o předchozím souhlasu (PIC) upravuje vývoz a dovoz určitých nebezpečných chemických látek a ukládá povinnosti podnikům, které tyto chemické látky chtějí vyvážet do třetích zemí.
Seznamy chemických látek podléhajících postupu předchozího souhlasu
Nařízení o perzistentních organických znečišťujících látkách zakazuje nebo výrazně omezuje výrobu a používání perzistentních organických znečišťujících látek v Evropské unii.
Limitní hodnoty expozice (OEL) na pracovišti jsou odvozené na základě dvou právních rámců, které tvoří nedílnou součást mechanismu EU na ochranu zdraví pracovníků.
The Waste Framework Directive aims to protect the environment and human health from the generation and management of waste and to improve efficient use of resources.
Revidovaná směrnice o pitné vodě si klade za cíl chránit občany a životní prostředí před škodlivými účinky znečištěné pitné vody a zlepšit přístup k pitné vodě.
Směrnice o pitné vodě
Agentura ECHA organizuje konzultace s cílem získat zpětnou vazbu od všech zainteresovaných stran a shromáždit co nejširší spektrum vědeckých informací pro regulativní postupy.
Tato stránka je jedinečným zdrojem informací o chemických látkách vyráběných v Evropě a do Evropy dovážených. Popisuje jejich nebezpečné vlastnosti, klasifikaci a označení a obsahuje informace o tom, jak je bezpečně používat.
stanoviska a dohody
Sekce podpory přináší nástroje a praktické pokyny společnostem, které mají povinnosti vyplývající z právních předpisů EU týkajících se chemických látek.
Inorganic slags produced from treatment of calcined scrap metals and oxides with borax, litharge and sodium carbonate followed by fusion.
The ‘Substance identity’ section is calculated from substance identification information from all ECHA databases. The substance identifiers displayed in the InfoCard are the best available substance name, EC number, CAS number and/or the molecular and structural formulas.
Some substance identifiers may have been claimed confidential, or may not have been provided, and therefore not be displayed.
The EC Number is the numerical identifier for substances in the EC Inventory. The EC Inventory is a combination of three independent European lists of substances from the previous EU chemicals regulatory frameworks (EINECS, ELINCS and the NLP-list). More information about the EC Inventory can be found here.
If the substance was not covered by the EC Inventory, ECHA attributes a list number in the same format, starting with the numbers 6, 7, 8 or 9.
The EC or list number is the primary substance identifier used by ECHA.
The CAS number is the substance numerical identifier assigned by the Chemical Abstracts Service, a division of the American Chemical Society, to substances registered in the CAS registry database. A substance identified primarily by an EC or list number may be linked with more than one CAS number, or with CAS numbers that have been deleted. More information about CAS and the CAS registry can be found here.
The molecular formula identifies each type of element by its chemical symbol and identifies the number of atoms of each element found in one discrete molecule of the substance. This information is only displayed if the substance is well–defined, its identity is not claimed confidential and there is sufficient information available in ECHA’s databases for ECHA’s algorithms to generate a molecular structure.
The molecular structure is based on structures generated from information available in ECHA’s databases. If generated, an InChI string will also be generated and made available for searching. This information is only displayed if the substance is well-defined, its identity is not claimed confidential and there is sufficient information available in ECHA’s databases for ECHA’s algorithms to generate a molecular structure.
More help available here.
EC / List no.:
The ‘Hazard classification and labelling’ section shows the hazards of a substance based on the standardised system of statements and pictograms established under the CLP (Classification Labelling and Packaging) Regulation. The CLP Regulation makes sure that the hazards presented by chemicals are clearly communicated to workers and consumers in the European Union. The CLP Regulation uses the UN Global Harmonised System (GHS) and European Union Specific Hazard Statements (EUH).
This section is based on three sources for information (harmonised classification and labelling (CLH), REACH registrations and CLP notifications). The source of the information is mentioned in the introductory sentence of the hazard statements. When information is available in all sources, the first two are displayed as a priority.
The purpose of the information provided under this section is to highlight the substance hazardousness in a readable format. It does not represent a new labelling, classification or hazard statement, neither reflect other factors that affect the susceptibility of the effects described, such as duration of exposure or substance concentration (e.g. in case of consumer and professional uses). Other relevant information includes the following:
To see the full list of notified classifications and to get more information on impurities and additives relevant to classification please consult the C&L Inventory.
More information about Classification and Labelling is available in the Regulations section of ECHA website.
Harmonised classification and labelling is a legally binding classification and labelling for a substance, agreed at European Community level. Harmonisation is based on the substance’s physical, toxicological and eco-toxicological hazard assessment.
The ‘Hazard classification’ and labelling section uses the signal word, pictogram(s) and hazard statements of the substance under the harmonised classification and labelling (CLH) as its primary source of information.
If the substance is covered by more than one CLH entry (e.g. disodium tetraborate EC no. 215–540–4, is covered by three harmonisations: 005–011–00–4; 005–011–01–1 and 005–011–02–9), CLH information cannot be displayed in the InfoCard as the difference between the CLH classifications requires manual interpretation or verification. If a substance is classified under multiple CLH entries, a link to the C&L Inventory is provided to allow users to view CLH information associated with the substance and no text is automatically generated for the InfoCard.
It is possible that a harmonisation is introduced through an amendment to the CLP Regulation. In that case, the ATP (Adaptation to Technical Progress) number is displayed.
More info on CLH can be found here.
If available, additional information on classification and labelling (C&L) is derived from REACH registration dossiers submitted by industry. This information has not been reviewed or verified by ECHA, and may change without prior notice. REACH registration dossiers have greater data requirements (such as supporting studies) than do notifications under CLP.
If no EU harmonised classification and labelling exists and the substance was not registered under REACH, information derived from classification and labelling (C&L) notifications to ECHA under CLP Regulation is displayed under this section. These notifications can be provided by manufacturers, importers and downstream users. ECHA maintains the C&L Inventory, but does not review or verify the accuracy of the information.
Note that for readability purposes, only the pictograms, signal words and hazard statements referred in more than 5% of the notifications under CLP are displayed.
According to the harmonised classification and labelling
approved by the European Union, this substance
may damage the unborn child and is suspected of damaging fertility,
is very toxic to aquatic life,
is very toxic to aquatic life with long lasting effects,
is harmful if swallowed,
is harmful if inhaled and
may cause damage to organs through prolonged or repeated exposure.
The ‘Properties of concern’ section shows ECHA-assigned graphical indicators for certain substance properties that are regarded as being of relevance or importance to human health and/or the environment based on the information provided to the Agency.
Properties of concern are calculated at four "levels" of certainty:
The following properties of concern are calculated:
The substance properties displayed in this section are derived from Harmonised classification and labelling (CLH) data, entries in the Candidate list of substances of very high concern for authorisation, the PBT assessment list, the ED assessment list, REACH registered dossier data and from notifications made under CLP. A prioritisation hierarchy means that data is taken from harmonised C&L data and regulatory lists first, then REACH registrations and finally from CLP notifications. By clicking on the "More details" button you can see the exact origin(s) of each Property of Concern.
Impurities or additives: When a specific critical property is calculated from industry data and where the majority of data submitters have indicated that the property relates to cases containing impurities and/or additives, then the respective critical property icon is modified with an asterisk (*).
Toxic to Reproduction
This section highlights four regulatory activities or outcomes under REACH – Registration, Evaluation, Authorisation and Restriction of Chemicals – Regulation (EC) No 1907/2006:
Please note: The identification of relevant regulatory activities and outcomes is done automatically and without manual verification. Substances may be grouped together under a specific regulatory activity for more efficient risk management and legislative processing (e.g. restriction on "Lead and its compounds"). In these cases, Infocards may not identify all substances in the group.Therefore it does not represent official and legally–binding information. To confirm if a substance is covered by a specific regulatory action the official publication, e.g. the electronic edition of the Official Journal of the European Union should be consulted.
The InfoCard summarises the non-confidential data of a substance held in the databases of the European Chemicals Agency (ECHA). InfoCards are generated automatically based on the data available at the time of generation.
The quality and correctness of the information submitted to ECHA remains the responsibility of the data submitter. The type of uses and classifications may vary between different submissions to ECHA and for a full understanding it is recommended to consult the source data. Information on applicable regulatory frameworks is also automatically generated and may not be complete or up to date. It is the responsibility of the substance manufacturers and importers to consult official publications, e.g. the electronic edition of the Official Journal of the European Union.
InfoCards are updated when new information is available. The date of the last update corresponds to the publication date of the InfoCard and not necessarily to the date in which the update occurred in the source data.
Here you can find all of the regulations and regulatory lists in which this substance appears, according to the data available to ECHA. This substance has been found in the following regulatory activities (directly, or inheriting the regulatory context of a parent substance):
This list contains hazardous substances for purposes of Directive 90/385/EEC on active implantable medical devices, particularly as regards Article 3 and Annex I (Essential Requirements). This non-exhaustive database is derived from: Table 3 of Annex VI to CLP, REACH Candidate List of SVHCs, and Directive 2000/54/EC's Annex III (Biological Agents list). Please note that Regulation (EU) 2017/745 on medical devices has repealed Directive 90/385/EEC and begun to apply from 26 May 2021. Nevertheless, Article 120 of the Regulation provides for a transitional period allowing medical devices, under specified conditions (e.g., placed on the market prior to 26 May 2021), to continue to comply with the Directive. In accordance with the fourth paragraph of Article 120, this period ends 26 May 2025.
This list contains use prohibitions of mercury and cadmium above certain thresholds in batteries and accumulators, with certain exceptions. It also captures certain labelling requirements on such products containing mercury, cadmium and lead above specified quantities.
This list contains substances assigned a binding biological exposure limit (BEL) by the European Union. National BELs for these substances may not deviate from the limits in the Directive. Annex II contains the binding BEL for lead.
This list contains a non-exhaustive inventory based on the list of substances with harmonised classification and labelling (i.e., Table 3 of Annex VI to the CLP Regulation 1272/2008/EC). While the harmonised list covers many hazardous substances, others not listed may also meet the classification criteria in accordance with the CLP Regulation.
This list contains a non-exhaustive inventory of substances based on Art. 2 carcinogen, mutagen and reprotoxin (CMR) definitions and Annex I of the Carcinogens, Mutagens and Reprotoxins Directive (CMRD). Category 1A and 1B CMRs are derived from the CLP Regulation's Table 3 of Annex VI (1272/2008/EC). Employers are obligated to minimize worker exposure to these agents as far as possible, and must arrange for medical surveillance of workers exposed to these substances.
This list contains a non-exhaustive inventory of substances taken from: (1) Table 3 of Annex VI to CLP; (2) the Candidate List of SVHCs; (3) Annex XIV of REACH (Authorisation List); (4) Annex XVII of REACH (Restrictions List); (5) F-gases subject to emission limits/reporting per Regulation 517/2014/EU; and (6) volatile organic compounds (VOCs) listed in the Ambient Air Directive 2008/50/EC. The basis of the list is Annex I(3) of the Construction Products Regulation 305/2011/EC, which stipulates that construction works must not have a high impact on human health or the environment as a result of: giving off toxic gas; emissions of dangerous substances, volatile organic compounds (VOC), greenhouse gases or dangerous particles into indoor or outdoor air; release of dangerous substances into drinking water, ground water, marine waters, surface waters or soil.
This list contains a non-exhaustive inventory of substances originating from: (1) Table 3 of Annex VI to CLP (i.e., the list of harmonised substances); (2) the Candidate List of Substances of Very High Concern (SVHCs); and REACH Annex XIV (Authorisation List). This list is compiled on the basis of Article 6(5) of Regulation 305/2011/EC on Marketing of Construction Products. This provision requires SDSs and information on hazardous substances (i.e., SVHCs) contained in construction products be provided with the declaration of performance.
This list contains substances which are banned from use in any cosmetic products marketed for sale or use in the European Union.
This list contains a non-exhaustive inventory of substances based on the list of hazardous substances with harmonised classification and labelling (i.e. Table 3 of Annex VI to the CLP Regulation), and the Candidate List of substances of very high concern (SVHCs). Pursuant to Article 6(6) of the EU Ecolabel Regulation, the ecolabel must not be awarded to goods containing substances or mixtures classified according to the CLP as toxic; hazardous to the environment; and carcinogenic, mutagenic, or toxic for reproduction (CMRs). Nor are products allowed the ecolabel award when they contain SVHCs (per Article 57 of REACH). While the CLP's harmonised list contains many such substances, other ones not listed in Table 3 may also meet the criteria specified for classification under the CLP.
This list contains the Annex II material and component general use exemptions that apply to the substances prohibited from use in the manufacture of automobiles under Art. 4(2)(a) of the ELV Directive.
This list contains a non-exhaustive inventory of hazardous substances as defined by Article 2(11) of the End-of-Life Vehicles Directive 2000/53/EC. It is based on the relevant subset of substances with harmonised classification listed in Table 3 of Annex VI to the CLP Regulation 1272/2008/EC.
This list contains the specific Annex II material and component use exemptions for the substances prohibited from use in the manufacture of automobiles under Art. 4(2)(a) of the ELV Directive.
This list contains a non-exhaustive list of Carcinogens, Mutagens and Reproductive substances (CMRs) that are not allowed for use in components of active and intelligent materials and articles per Art. 5(2)(c)(i) of Regulation 450/2009/EC. The list is derived from a subset of substances on Table 3 of Annex VI to the CLP Regulation (1272/2008/EC).
This list contains a non-exhaustive inventory of substances that fall within the European Union's hazardous substance definitions, as provided on: (1) Table 3 of Annex VI to the CLP Regulation 1272/2008/EC; (2) Annex III of Directive 2000/54/EC (Biological Agents); Candidate List of SVHCs; and REACH Annexes XIV and XVII (Authorisation and Restriction lists). They can be considered hazardous for purposes of the General Product Safety Directive 2001/95/EC.
This list contains a non-exhaustive inventory of hazardous substances for purposes of essential requirements (Article 3 and Annex I) for general safety, design, manufacture and hazard communication of in vitro diagnostic medical devices. It is derived from: Table 3 of Annex VI to CLP, REACH Candidate List of SVHCs, and Directive 2000/54/EC's Annex III (Biological Agents list). Note that Regulation 2017/746/EU on in vitro diagnostic medical devices was published in the EU Official Journal on 5 May 2017. With few exceptions specified in Articles 112 and 113 of this Regulation, Directive 98/79/EC is repealed, and the rules pursuant to 2017/746/EU apply, from 26 May 2022.
This list contains the polluting substances for which emission limit values are assigned under Directive 2010/75/EU on Industrial Emissions (Integrated Pollution Prevention and Control - IPPC). Member States must permit all qualifying facilities in order to ensure that they minimize impact on the environment. The permit issued must provide emission limit values for pollutants on this list.
This list contains emission limit values for polluting substances in waste gases and waste water, assigned according to facility type (i.e., combustion plants (Annex V), waste incineration/co-incineration plants (Annex VI), and installations producing titanium dioxide (Annex VIII)), under Directive 2010/75/EU on Industrial Emissions (Integrated Pollution Prevention and Control - IPPC). For this list, if a substance presents 2 values in the ''Average sampling duration'' field, these indicate minimum and maximum average sampling period.
This list contains a non-exhaustive inventory of hazardous substances for purposes of the Marine Strategy Framework Directive, especially as it concerns Art. 3(8), and Annexes I and III. The listed substances meet the European Union's definitions as hazardous, as provided on: (1) Table 3 of Annex VI to the CLP Regulation (1272/2008/EC); (2) Annex III of Directive 2000/54/EC (Biological Agents); Candidate List of SVHCs; and REACH Annex XIV (Authorisation List).
This list contains hazardous substances in accordance with the Medical Devices Directive's (MDD) design and construction requirements pursuant to Annex I, Part II (7) & (8) (i.e., chemical, physical and biological properties; and infection and microbial contamination). Specifically, the non-exhaustive database is derived from: Table 3 of Annex VI to CLP, REACH Candidate List of SVHCs, and Directive 2000/54/EC's Annex III (Biological Agents list). Please note that Regulation (EU) 2017/745 on medical devices has repealed Directive 93/42/EEC and begun to apply from 26 May 2021. Nevertheless, Article 120 of the Regulation provides for a transitional period allowing medical devices, under specified conditions (e.g., placed on the market prior to 26 May 2021), to continue to comply with the Directive. In accordance with the fourth paragraph of Article 120, this period ends 26 May 2025.
This list contains hazardous substances for purposes of the Medical Devices Regulation (MDR), based on the legislation's Annex I general safety and performance requirements, including for chemical, physical and biological properties. Specifically, the non-exhaustive database is derived from: Table 3 of Annex VI to CLP, REACH Candidate List of SVHCs, and Directive 2000/54/EC's Annex III (Biological Agents list).
This list contains a non-exhaustive inventory of substances to which pregnant workers and workers who have recently given birth or are breastfeeding may not be exposed. Employers are obligated to prevent the exposure of these workers to any agents that may have adverse health effects on either mother or child. The inventory originates from Table 3 of Annex VI to the CLP.
This list contains biological and chemical agents, in accordance with Art. 7 and points 2 and 3 of the Annex to Directive 94/33/EC, to which young persons (under 18 years of age) may not be exposed at the workplace. The list is a non-exhaustive inventory of such substances based on: 1) agents of risk groups 3 and 4 under Directive 2000/54/EC; 2) Table 3 of Annex VI to the CLP Regulation; 3) and Annex I of Directive 2004/37/EC.
This list contains the application exemptions listed in Annexes III and IV to RoHS (2011/65/EU). Annex III contains applications exempted from the restriction in Article 4(1), while Annex IV lists applications exempted from the restriction in Article 4(1) specific to medical devices and monitoring and control instruments.
This list contains the substances listed in Annex II to the Directive on the restriction of hazardous substances in electrical and electronic equipment (RoHS - 2011/65/EU). Restricted per Art. 4(1) of RoHS, each listed substance includes a maximum concentration value tolerated by weight in homogeneous materials.
This list contains a non-exhaustive inventory of substances that fall within the scope of the European Union's definition of hazardous chemical and biological substances, as provided on: (1) Table 3 of Annex VI to the CLP Regulation 1272/2008/EC; and (2) Annex III of Directive 2000/54/EC (Biological Agents). The EU's Occupational Safety and Health (OSH) Framework Directive 89/391/EEC applies to risks arising from chemical, physical and biological agents at the workplace.
This list contains hazardous substances based on Table 3 of Annex VI to the CLP Regulation 1272/2008/EC. According to the annexes to Directive 92/58/EEC, storage areas and containers containing chemical substances or mixtures that are classified as hazardous according to the CLP Regulation must be duly marked and/or labeled. Directive 92/58/EEC requires employers to ensure proper signage is posted in areas where hazards cannot be avoided or reduced.
This list contains substances whose use in toys is restricted in the European Union in accordance with points 8 and 13, Part III, and Appendices A and C of Annex II (Particular Safety Requirements) to Directive 2009/48/EC on toy safety. List entries include substance name, CAS number, limit values for certain product types and, where applicable, notes on restrictions.
This list contains substances that have been assigned hazard property (HP) waste codes 1-15, as defined in terms of the hazard class and category, hazard (H) statement, and/or concentration limits provided in Annex III of the Waste Framework Directive 2008/98/EC. The classifications of the substances listed in the list are based on their harmonised classifications per Table 3 of Annex VI to the CLP Regulation 1272/2008/EC.
This list contains environmental quality standards (EQS), including annual averages and maximum allowable concentrations, for priority substances and certain other pollutants, as provided for in Article 16 of Directive 2000/60/EC establishing a framework for Community action in the field of water policy.
This list contains substances identified as priority substances that are targeted for reduction and eventual removal from waste water discharge. The list includes 'priority hazardous substances' which are subject to special restrictions.
This substance has been identified as member of the following groups of substances:
Welcome to the ECHA website. This site is not fully supported in Internet Explorer 7 (and earlier versions). Please upgrade your Internet Explorer to a newer version.
Do not show this message again