Use of this information is subject to copyright laws and may require the permission of the owner of the information, as described in the ECHA Legal Notice.
EC number: -
CAS number: -
The estimation of the vapour pressure of FP-100 was based on the EEC directive 92/69, Part A, Methods for the determination of physico-chemical properties, A.4 “Vapour Pressure”, EEC Publication No. L383, December 1992 and the OECD Guideline No. 104, “Vapour Pressure”, adopted July 27, 1995.
The vapour pressure of FP-100 was estimated to be between 1.79 x 10-19Pa (for n = 3) and 6.68 x 10-39Pa (for n = 6) at 25°C based on the boiling point calculated and using the Modified Watson Correlation.
During RCC study B17932, no boiling point could be observed between room temperature and 400°C. Consequently, the vapour pressure of FP-1 00 was calculated to be <3.22 x 10-6Pa at 25°C
based on the experimentally determined boiling point of >400°C.
The vapour pressure of FP-100 was calculated to be <3.22 x 10-6 Pa at 25°C based on the experimentally determined boiling point of >400°C.
Information on Registered Substances comes from registration dossiers which have been assigned a registration number. The assignment of a registration number does however not guarantee that the information in the dossier is correct or that the dossier is compliant with Regulation (EC) No 1907/2006 (the REACH Regulation). This information has not been reviewed or verified by the Agency or any other authority. The content is subject to change without prior notice.Reproduction or further distribution of this information may be subject to copyright protection. Use of the information without obtaining the permission from the owner(s) of the respective information might violate the rights of the owner.
Welcome to the ECHA website. This site is not fully supported in Internet Explorer 7 (and earlier versions). Please upgrade your Internet Explorer to a newer version.
Do not show this message again