Registration Dossier

Data platform availability banner - registered substances factsheets

Please be aware that this old REACH registration data factsheet is no longer maintained; it remains frozen as of 19th May 2023.

The new ECHA CHEM database has been released by ECHA, and it now contains all REACH registration data. There are more details on the transition of ECHA's published data to ECHA CHEM here.

Diss Factsheets

Administrative data

First-aid measures

Description of first aid measures:
Pay attention to self-protection.
Remove victims from hazardous area.
Immediately remove soiled or soaked clothing and remove it to a safe distance.
Keep victim warm, in a stabilized position and covered.
Do not leave victims unattended.
If the casualty is unconscious: Place the victim in the recovery position.

Inhalation:
Inhalation is possible if aerosols, mists, dusts, or smoke form.
Move victims into fresh air.
With labored breathing:
Provide with oxygen.
Consult a doctor.
If the casualty is not breathing: Perform mouth-to-mouth resuscitation, notify emergency physician immediately.

Skin contact:
Wash off affected area immediately with plenty of water for at least 15 minutes.
If symptoms persist, consult a physician for treatment.

Eye contact:
With eye held open, thoroughly rinse immediately with plenty of water for at least 10 minutes.
In case of persistent discomfort: Consult an ophthalmologist.

Ingestion:
Rinse out mouth.
Immediately give large quantities of water to drink.
Consult a physician immediately.

Most important symptoms and effects, both acute and delayed:
Indication of any immediate medical attention and special treatment needed:
This substance does not have any noteworthy noxious potential.
Damage to health is thus not expected.

Fire-fighting measures

Suitable extinguishing media:
All extinguishing substances suitable.

Unsuitable extinguishing media:
Do not use a solid water stream as it may scatter and spread fire.

Special hazards arising from the substance or mixture:
May be released in case of fire: carbon monoxide, carbon dioxide, organic products of decomposition, nitric oxides, sulphur dioxide.

Special protective equipment for fire-fighters:
In the event of fire, wear self-contained breathing apparatus.
Full protective suit

Advice for firefighters:
In case of fire, remove the endangered containers and bring to a safe place, if this can be done safely.
Contaminated extinguishing water must be treated at a suitable disposal plant in accordance with waste management laws.
Keep out unprotected persons.

Accidental release measures

Personal precautions, protective equipment and emergency procedures:
Wear personal protective equipment.
Keep unauthorized persons away.

Environmental precautions:
Observe regulations on prevention of water pollution (check, dam up, cover up).
Do not allow entrance in sewage water, soil, stretches of water, drainage systems, surface water.
If the product contaminates rivers and lakes or drains inform respective authorities.

Methods and material for containment and cleaning up:
Soak up with inert absorbent material (e.g. sand, silica gel, acid binder, universal binder, sawdust).
Waste to be packed like clean product and to be labelled.
Identification label on packages not to be removed until recycling.
Disposal according to local authority regulations.

Handling and storage

Handling:
Precautions for safe handling:
Wear personal protective equipment.
Ensure sufficient ventilation.
Provide appropriate exhaust ventilation at machinery.
Keep away from heat and sources of ignition.
Avoid residues of the product on the containers.
No particular measures required if used correctly.

Advice on protection against fire and explosion:
Normal measures for preventive fire protection.

Storage:
Conditions for safe storage, including any incompatibilities:
Store in the original receptacle, keeping this tightly sealed, under cool and dry conditions.
Protect from heat and exposure to direct sunlight.

Further information:
Protect from sunlight, warmth and heat.
In order to ensure due transportation, make certain that stacks are of the correct height, containers are securely fastened so as not to fall off, and labelled according to the regulations.

Advice on common storage:
No special precautions required.

German storage class:
Combustible / non-combustible liquids and solids not assigned to other storage classes.

Transport information

Land transport (UN RTDG/ADR/RID)

Shippingopen allclose all
Special provisions / remarks
Remarks:
Not dangerous according to transport regulations.

Inland waterway transport (UN RTDG/ADN(R))

Shippingopen allclose all
Special provisions / remarks
Remarks:
Not dangerous according to transport regulations.

Marine transport (UN RTDG/IMDG)

Shippingopen allclose all
Special provisions / remarks
Remarks:
Not dangerous according to transport regulations.

Air transport (UN RTDG/ICAO/IATA)

Shippingopen allclose all
Special provisions / remarks
Remarks:
Not dangerous according to transport regulations.

Additional transport information

Additional information
Special provisions / remarks / other:
Combination traffic :
Labelling of containers / shipping units following main product run as per sea or air transport regulations.

Exposure controls / personal protection

Control parameters:
Engineering measures:
Ensure suitable suction/aeration at the work place and with operational machinery.
Provide for installation of emergency shower and eye bath.

Personal protective equipment:
Respiratory protection:
If the limit values like TLV are exceeded, when vapours or aerosols occur use respiratory equipment with suitable filter (filter type ABEK) or wear a self contained respiratory apparatus.
Note time limit for wearing respiratory protective equipment.

Hand protection:
Applies to handling for brief periods or of small amounts
Glove material: Nitrile, for example: Dermatril 740, Kächele-Cama Latex GmbH (KCL), Germany
Material thickness: 0.11 mm
Method: DIN EN 374

Applies to handling for longer periods or of large amounts
Glove material: Nitrile/Chloroprene, for example, Nitopren 717, Kächele-Cama Latex GmbH (KCL), Germany
Material thickness: 0.65 mm
Method:DIN EN 374

Eye protection:
Safety glasses with side-shields conforming to EN166 or when handling larger quantities: basket-shaped glasses.
Ensure that eyewash stations and safety showers are close to the workstation location.

Skin and body protection:
Usual lab protective clothing.
When handling larger quantities: light protective clothing, disposable protective suit.

Hygiene measures:
No eating, drinking, smoking, or snuffing tobacco at work.
Wash face and/or hands before break and end of work.
Remove and wash contaminated clothing before re-use.
Avoid contact with skin and eyes.
Cleanse and apply cream to skin after work.
Implement skin protection measures according to skin protection schedule.

Protective measures:
Handle in accordance with good industrial hygiene and safety practices.
If there is the possibility of skin/eye contact, the indicated hand/eye/body protection should be used.
The personal protective equipment used must meet the requirements of directive 89/686/EEC and amendments (CE certification).
It should be defined in the work place in the form of a risk analysis according to directive 89/686/EEC and amendments.
This is a product in the process of development, the substance-specific properties of which are not yet completely known.
The protective equipment recommended reflects the current state of knowledge.

Stability and reactivity

Possibility of hazardous reactions:
No dangerous reactions are known to occur with correct handling and storage.

Incompatible materials:
Strong oxidizing agents

Disposal considerations

Product:
Waste to be packed like clean product and to be labelled.
Identification label on packages not to be removed until recycling.