Seznam ES

Seznam ES

Vnořené aplikace

Seznam ES

The EC inventory published below is a copy as received from the JRC in 2008 on the founding of ECHA. It is comprised of the following lists:

  • EINECS (European INventory of Existing Commercial chemical Substances) as published in O.J. C 146A, 15.6.1990. EINECS is an inventory of substances that were deemed to be on the European Community market between 1 January 1971 and 18 September 1981. EINECS was drawn up by the European Commission in the application of Article 13 of Directive 67/548/EEC, as amended by Directive 79/831/EEC, and in accordance with the detailed provisions of Commission Decision 81/437/EEC. Substances listed in EINECS are considered phase-in substances under the REACH Regulation.
  • ELINCS (European LIst of Notified Chemical Substances) in support of Directive 92/32/EEC, the 7th amendment to Directive 67/548/EEC. ELINCS lists those substances which were notified under Directive 67/548/EEC, the Dangerous Substances Directive Notification of New Substances (NONS) that became commercially available after 18 September 1981.
  • NLP (No-Longer Polymers).  The definition of polymers was changed in April 1992 by Council Directive 92/32/EEC amending Directive 67/548/EEC, with the result that substances previously considered to be polymers were no longer excluded from regulation. Thus the No-longer Polymers (NLP) list was drawn up, consisting of such substances that were commercially available between 18 September 1981 and 31 October 1993.
Database contains 106212 unique substances/entries.
Filter the list

The List does not contain any Substances.
 
Extractives and their physically modified derivatives such as tinctures, concretes, absolutes, essential oils, oleoresins, terpenes, terpene-free fractions, distillates, residues, etc., obtained from Wedelia calendulacea, Compositae.
296-973-6
93165-84-5
Extractives and their physically modified derivatives such as tinctures, concretes, absolutes, essential oils, oleoresins, terpenes, terpene-free fractions, distillates, residues, etc., obtained from Wedelia calendulacea, Compositae.
Details
The wax fraction obtained from sticklac, seedlac or shellac during preparation of dewaxed bleached wax.
308-755-0
98219-84-2
The wax fraction obtained from sticklac, seedlac or shellac during preparation of dewaxed bleached wax.
Details
307-913-6
97766-50-2
Details
An alcohol insoluble material obtained as the residue of the alcohol extraction of low grade commercial abietic acid.
270-718-9
68477-28-1
An alcohol insoluble material obtained as the residue of the alcohol extraction of low grade commercial abietic acid.
Details
305-233-4
94350-15-9
Details
The waxy product from the husks of Oryza sativa, Gramineae.
232-409-7
8016-60-2
The waxy product from the husks of Oryza sativa, Gramineae.
Details
Extractives and their physically modified derivatives. It consists primarily of the glycerides of the fatty acids lauric, linoleic and oleic and palmitic acids. (Ceroxylon andicola, Palmae).
232-420-7
8021-56-5
Extractives and their physically modified derivatives. It consists primarily of the glycerides of the fatty acids lauric, linoleic and oleic and palmitic acids. (Ceroxylon andicola, Palmae).
Details
Extractives and their physically modified derivatives such as tinctures, concretes, absolutes, essential oils, oleoresins, terpenes, terpene-free fractions, distillates, residues, etc., obtained from Attalea excelsa, Palmae.
272-847-6
68917-70-4
Extractives and their physically modified derivatives such as tinctures, concretes, absolutes, essential oils, oleoresins, terpenes, terpene-free fractions, distillates, residues, etc., obtained from Attalea excelsa, Palmae.
Details
297-266-5
93384-54-4
Details
305-695-7
94945-16-1
Details
305-694-1
94945-15-0
Details
305-693-6
94945-14-9
Details
305-692-0
94945-13-8
Details
305-691-5
94945-12-7
Details
293-385-1
91079-00-4
Details
305-689-4
94945-11-6
Details
297-264-4
93384-53-3
Details
297-263-9
93384-52-2
Details
305-688-9
94945-10-5
Details
Extractives and their physically modified derivatives. It consists primarily of the glycerides of C14-C18 and C16-C22 unsatd. fatty acids. (Hoplostethus atlanticus).
293-384-6
91078-99-8
Extractives and their physically modified derivatives. It consists primarily of the glycerides of C14-C18 and C16-C22 unsatd. fatty acids. (Hoplostethus atlanticus).
Details
A complex combination of aliphatic alcohols and unsaturated paraffins obtained from the alkaline fusion of castor oil.
287-841-9
85586-39-6
A complex combination of aliphatic alcohols and unsaturated paraffins obtained from the alkaline fusion of castor oil.
Details
Extractives and their physically modified derivatives such as tinctures, concretes, absolutes, essential oils, oleoresins, terpenes, terpene-free fractions, distillates, residues, etc., obtained from Cucumis citrullus, Cucurbitaceae.
290-802-9
90244-99-8
Extractives and their physically modified derivatives such as tinctures, concretes, absolutes, essential oils, oleoresins, terpenes, terpene-free fractions, distillates, residues, etc., obtained from Cucumis citrullus, Cucurbitaceae.
Details
231-791-2
7732-18-5
H2O
Details
Electrolytic solution from electrolysis of zinc sulfate consisting primarily of zinc sulfate, manganese oxides and sulfuric acid.
273-723-4
69012-24-4
Electrolytic solution from electrolysis of zinc sulfate consisting primarily of zinc sulfate, manganese oxides and sulfuric acid.
Details
The aqueous layer formed by acidulation of tall-oil soap with sulfuric acid during the production of tall oil. Composed primarily of a solution of sodium sulfate, the remaining being lignin and tall oil.
266-038-7
65997-02-6
The aqueous layer formed by acidulation of tall-oil soap with sulfuric acid during the production of tall oil. Composed primarily of a solution of sodium sulfate, the remaining being lignin and tall oil.
Details
A complex combination of hydrocarbons, inorganic salts and water obtained as a sludge from the surface water separation plant. It contains minor quantities of hydrocarbons boiling above approximately 35°C (95°F).
308-527-0
98072-71-0
A complex combination of hydrocarbons, inorganic salts and water obtained as a sludge from the surface water separation plant. It contains minor quantities of hydrocarbons boiling above approximately 35°C (95°F).
Details
Molybdenum and rhenium bearing off-gas scrubber solution.
273-722-9
69012-23-3
Molybdenum and rhenium bearing off-gas scrubber solution.
Details
The aqueous liquor produced during the desulfurization of coke-oven gas by the Stretford process (high temperature destructive distillation). Consists primarily of an alkaline solution of sodium thiocyanate and sodium thiosulfate with traces of vanadium and suspended sulfur.
293-802-7
91082-87-0
The aqueous liquor produced during the desulfurization of coke-oven gas by the Stretford process (high temperature destructive distillation). Consists primarily of an alkaline solution of sodium thiocyanate and sodium thiosulfate with traces of vanadium and suspended sulfur.
Details
Electrolytic solution from electrolysis of cadmium sulfate consisting primarily of cadmium sulfate and sulfuric acid.
273-721-3
69012-21-1
Electrolytic solution from electrolysis of cadmium sulfate consisting primarily of cadmium sulfate and sulfuric acid.
Details
Condensed water vapors recovered following removal of tallow residues and greases from rendered animal waste.
297-921-5
93763-99-6
Condensed water vapors recovered following removal of tallow residues and greases from rendered animal waste.
Details
Waste material obtained from the terne coating of steel. Consists primarily of zinc chloride with traces of lead and zinc.
305-446-2
94552-00-8
Waste material obtained from the terne coating of steel. Consists primarily of zinc chloride with traces of lead and zinc.
Details
The residue after extraction of animal glue or gelation. It consists of hair, hide, protein and leather scrap. It is processed by acidulation with sulfuric acid and water to remove grease and then digested under pressure and dried in a vacuum. It contains protein, nitrogen, moisture, fat and ash.
270-343-0
68425-25-2
The residue after extraction of animal glue or gelation. It consists of hair, hide, protein and leather scrap. It is processed by acidulation with sulfuric acid and water to remove grease and then digested under pressure and dried in a vacuum. It contains protein, nitrogen, moisture, fat and ash.
Details
The waste products from any petroleum refinery or production process which has been dewatered. It is commonly called slop oil.
270-716-8
68477-26-9
The waste products from any petroleum refinery or production process which has been dewatered. It is commonly called slop oil.
Details
Grinding material residues obtained during the production of magnets. Consists primarily of aluminum, cobalt, copper, iron, nickel, titanium and rare earth metals.
302-677-0
94114-42-8
Grinding material residues obtained during the production of magnets. Consists primarily of aluminum, cobalt, copper, iron, nickel, titanium and rare earth metals.
Details
Material obtained during the recycling of exhausted lead storage batteries. Consists primarily of oxides and sulfates of lead and lead alloys.
305-445-7
94551-99-2
Material obtained during the recycling of exhausted lead storage batteries. Consists primarily of oxides and sulfates of lead and lead alloys.
Details
Residue from protein extraction from chicken feathers
273-163-0
68952-07-8
Residue from protein extraction from chicken feathers
Details
305-444-1
94551-98-1
Details
Substance formed by the action of heat, molten glasses and vapors on refractory blocks from glass melting furnaces. Consists primarily of refractory oxides, elements from glass making and trace elements from fuels.
297-507-4
93572-77-1
Substance formed by the action of heat, molten glasses and vapors on refractory blocks from glass melting furnaces. Consists primarily of refractory oxides, elements from glass making and trace elements from fuels.
Details
Wastes from the flash furnace of a copper smelter composed primarily of copper, iron silicate and magnetite.
273-837-4
69029-98-7
Wastes from the flash furnace of a copper smelter composed primarily of copper, iron silicate and magnetite.
Details
The solution of an appropriate pickling acid or combination of acids containing any of the elements, oxides, or salts present in steel. Pickling acids include hydrochloric, hydrofluoric, nitric, phosphoric, and sulfuric acids.
266-008-3
65996-75-0
The solution of an appropriate pickling acid or combination of acids containing any of the elements, oxides, or salts present in steel. Pickling acids include hydrochloric, hydrofluoric, nitric, phosphoric, and sulfuric acids.
Details
Substance resulting from the treatment of copper-manufacturing effluent with calcium hydroxide and subsequent filtration. Consists primarily of calcium and copper hydroxide and carbonates, oxides or sulfates of calcium, copper and other metals.
302-676-5
94114-41-7
Substance resulting from the treatment of copper-manufacturing effluent with calcium hydroxide and subsequent filtration. Consists primarily of calcium and copper hydroxide and carbonates, oxides or sulfates of calcium, copper and other metals.
Details
Wastes from the processing of the seeds of Theobroma cacao resulting from decay, superheating, or other unforeseen events occurring during the production of cocoa mass, cocoa powder and cocoa butter. This waste is unfit for human consumption.
295-889-7
92129-87-8
Wastes from the processing of the seeds of Theobroma cacao resulting from decay, superheating, or other unforeseen events occurring during the production of cocoa mass, cocoa powder and cocoa butter. This waste is unfit for human consumption.
Details
The waste material obtained from a phosphating process used to treat steel so as to form a protective coating on its surface and reduce its chemical activity. Composed primarily of phosphoric acid, it may contain phosphates of various metals as well as silicon fluoride and sodium chlorate.
308-528-6
98072-72-1
The waste material obtained from a phosphating process used to treat steel so as to form a protective coating on its surface and reduce its chemical activity. Composed primarily of phosphoric acid, it may contain phosphates of various metals as well as silicon fluoride and sodium chlorate.
Details
300-270-2
93924-75-5
Details
Residues of the production of metallic tantalum powder, which is composed primarily of oxides and fluorides of iron, potassium, sodium, silicon and tantalum.
287-400-0
85507-78-4
Residues of the production of metallic tantalum powder, which is composed primarily of oxides and fluorides of iron, potassium, sodium, silicon and tantalum.
Details
Granular substance resulting from the melting of steel scrap. Consists primarily of iron with varying amounts of carbon, manganese, phosphorus, silicon and sulfur.
293-801-1
91082-86-9
Granular substance resulting from the melting of steel scrap. Consists primarily of iron with varying amounts of carbon, manganese, phosphorus, silicon and sulfur.
Details
The solids removed in the clarification of a pulp mill primary waste stream or from the biological action in an aerated stabilization lagoon. It consists mainly of wood fibers, fiber fragments, proteinaceous materials.
270-717-3
68477-27-0
The solids removed in the clarification of a pulp mill primary waste stream or from the biological action in an aerated stabilization lagoon. It consists mainly of wood fibers, fiber fragments, proteinaceous materials.
Details
308-526-5
98072-70-9
Details
By-product from nickel production containing NiO, SiO2, CuO, and MnO and sulfur.
293-799-2
91082-84-7
By-product from nickel production containing NiO, SiO2, CuO, and MnO and sulfur.
Details
270-989-3
68512-89-0
Details

Export search results to: